/openbmc/linux/arch/parisc/include/asm/ |
H A D | checksum.h | 33 " ldws,ma 4(%1), %0\n" in ip_fast_csum() 37 " ldws 8(%1), %5\n" in ip_fast_csum() 39 " ldws,ma 12(%1), %3\n" in ip_fast_csum() 40 " addc %0, %5, %0\n" in ip_fast_csum() 42 "1: ldws,ma 4(%1), %3\n" in ip_fast_csum() 47 " extru %0, 15, 16, %5\n" in ip_fast_csum() 48 " addc %4, %5, %0\n" in ip_fast_csum() 49 " extru %0, 15, 16, %5\n" in ip_fast_csum() 50 " add %0, %5, %0\n" in ip_fast_csum() 130 " ldd,ma 8(%1), %4\n" /* get 1st saddr word */ in csum_ipv6_magic() [all …]
|
H A D | assembly.h | 63 #define STREGM std,ma 278 fstd,ma %fr0, 8(\regs) 279 fstd,ma %fr1, 8(\regs) 280 fstd,ma %fr2, 8(\regs) 281 fstd,ma %fr3, 8(\regs) 282 fstd,ma %fr4, 8(\regs) 283 fstd,ma %fr5, 8(\regs) 284 fstd,ma %fr6, 8(\regs) 285 fstd,ma %fr7, 8(\regs) 286 fstd,ma %fr8, 8(\regs) [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
H A D | ti,lp8727.yaml | 45 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50% 53 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA, 54 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA 76 /* AC charger: 5% EOC and 500mA charging current */ 83 /* USB charger: 10% EOC and 400mA charging current */
|
/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | phy-stm32-usbphyc.yaml | 106 - <1> increases the level by 5 to 7 mV 108 - <3> decreases the level by 5 to 7 mV 125 - <0> = 18.87 mA target current / nominal + 0% 126 - <1> = 19.165 mA target current / nominal + 1.56% 127 - <2> = 19.46 mA target current / nominal + 3.12% 128 - <3> = 19.755 mA target current / nominal + 4.68% 129 - <4> = 20.05 mA target current / nominal + 6.24% 130 - <5> = 20.345 mA target current / nominal + 7.8% 131 - <6> = 20.64 mA target current / nominal + 9.36% 132 - <7> = 20.935 mA target current / nominal + 10.92% [all …]
|
/openbmc/linux/include/linux/platform_data/ |
H A D | adp8870.h | 33 #define ADP8870_LED_D5 (5) 44 #define ADP8870_BL_D6 (1 << 5) 56 #define ADP8870_FADE_T_1500ms 5 78 #define ADP8870_BL_AMBL_FILT_2560ms 5 83 * Blacklight current 0..30mA 118 u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ 119 u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ 120 u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ 121 u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ 122 u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ [all …]
|
H A D | adp8860.h | 36 #define ADP8860_LED_D5 (5) 47 #define ADP8860_BL_D6 (1 << 5) 59 #define ADP8860_FADE_T_1500ms 5 81 #define ADP8860_BL_AMBL_FILT_2560ms 5 86 * Blacklight current 0..30mA 110 u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ 111 u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ 112 u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ 113 u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ 114 u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pad/ |
H A D | api.h | 22 #define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ 23 #define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ 24 #define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ 25 #define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ 26 #define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ 27 #define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ 28 #define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ 30 #define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ 31 #define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ 32 #define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/leds/backlight/ |
H A D | sky81452-backlight.txt | 10 - led-sources : List of enabled channels from 0 to 5. 16 : It should be one of 4, 5, 6 and 7V. 17 - skyworks,current-limit-mA 18 : It should be 2300mA or 2750mA. 25 led-sources = <0 1 2 5>; 28 skyworks,current-limit-mA = <2300>;
|
/openbmc/linux/include/linux/mfd/ |
H A D | adp5520.h | 70 #define ADP5520_DIM_EN (1 << 5) 91 #define ADP5520_BL_LVL ((x) << 5) 110 #define ALS_CMPR_CFG_VAL(filt, l3_en) (((0x7 & filt) << 5) | l3_en) 122 #define ADP5520_R3_MODE (1 << 5) 137 #define ADP5520_GPIO_C1 (1 << 5) 158 #define ADP5520_COL_C1 (1 << 5) 212 #define ADP5520_FADE_T_1500ms 5 234 #define ADP5520_BL_AMBL_FILT_2560ms 5 239 * Blacklight current 0..30mA 260 u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ [all …]
|
/openbmc/linux/drivers/phy/mediatek/ |
H A D | phy-mtk-hdmi-mt8195.c | 138 case 5: in mtk_hdmi_pll_set_hw() 250 * ICO clk = 5*TMDS_CLK*TXPOSDIV*TXPREDIV in mtk_hdmi_pll_calc() 251 * ICO clk constraint: 5G =< ICO clk <= 12G in mtk_hdmi_pll_calc() 254 ns_hdmipll_ck = 5 * tmds_clk * txposdiv * txpredivs[i]; in mtk_hdmi_pll_calc() 255 if (ns_hdmipll_ck >= 5 * GIGA && in mtk_hdmi_pll_calc() 260 (ns_hdmipll_ck < 5 * GIGA || ns_hdmipll_ck > 12 * GIGA)) { in mtk_hdmi_pll_calc() 313 * data channel bias 24mA, clock channel bias 20mA in mtk_hdmi_pll_drv_setting() 316 * data channel 20mA, clock channel 16mA in mtk_hdmi_pll_drv_setting() 318 * data channel & clock channel bias 10mA in mtk_hdmi_pll_drv_setting() 323 data_channel_bias = 0x3c; /* 24mA */ in mtk_hdmi_pll_drv_setting() [all …]
|
/openbmc/linux/include/linux/usb/ |
H A D | pd.h | 20 PD_CTRL_PING = 5, 45 PD_DATA_BATT_STATUS = 5, 60 PD_EXT_BATT_CAP = 5, 86 #define PD_HEADER_DATA_ROLE BIT(5) 232 #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ 235 #define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) argument 237 #define PDO_FIXED(mv, ma, flags) \ argument 239 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) 257 #define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ 261 #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) argument [all …]
|
/openbmc/linux/Documentation/hwmon/ |
H A D | ltc4245.rst | 53 in2_input 5v input voltage (mV) 58 in2_min_alarm 5v input undervoltage alarm 62 curr1_input 12v current (mA) 63 curr2_input 5v current (mA) 64 curr3_input 3v current (mA) 65 curr4_input Vee (-12v) current (mA) 68 curr2_max_alarm 5v overcurrent alarm 73 in6_input 5v output voltage (mV) 78 in6_min_alarm 5v output undervoltage alarm 87 power2_input 5v power usage (mW)
|
/openbmc/linux/Documentation/devicetree/bindings/iio/dac/ |
H A D | adi,ad5755.yaml | 82 0: 0 V to 5 V voltage range. 84 2: Plus minus 5 V voltage range. 86 4: 4 mA to 20 mA current range. 87 5: 0 mA to 20 mA current range. 88 6: 0 mA to 24 mA current range.
|
/openbmc/linux/kernel/bpf/ |
H A D | memalloc.c | 44 5, /* 40 */ 45 5, /* 48 */ 46 5, /* 56 */ 47 5, /* 64 */ 496 int bpf_mem_alloc_init(struct bpf_mem_alloc *ma, int size, bool percpu) in bpf_mem_alloc_init() argument 504 ma->percpu = percpu; in bpf_mem_alloc_init() 531 ma->cache = pc; in bpf_mem_alloc_init() 558 ma->caches = pcc; in bpf_mem_alloc_init() 593 static void check_leaked_objs(struct bpf_mem_alloc *ma) in check_leaked_objs() argument 599 if (ma->cache) { in check_leaked_objs() [all …]
|
/openbmc/linux/Documentation/translations/it_IT/process/ |
H A D | 2.Process.rst | 27 5.1 5 maggio, 2019 34 Ciascun rilascio 5.x è un importante rilascio del kernel con nuove 37 modifiche a parecchie migliaia di linee di codice. La 5.x. è pertanto la 65 consentita una modifica più consistente, ma tali occasioni sono rare. 100 rilevate nel precedente rilascio. Nessun baco è il benvenuto, ma quelli che 112 regressioni al giro successivo. Quindi molti kernel 5.x escono con una 118 rilascio stabile usando la numerazione 5.x.y. Per essere presa in 131 31 luglio 5.2.5 170 viene spesso svolto senza coinvolgere la comunità, ma è meglio renderlo 193 patch non riceve alcuna critica ma non è stata integrata dal [all …]
|
/openbmc/linux/Documentation/power/regulator/ |
H A D | overview.rst | 101 - regulator current output limit is 20mA @ 5V but is 102 10mA @ 10V. 110 - Domain-3 current limit is 0mA -> 20mA. 116 from 5mA to 10mA to increase LCD illumination. This passes 120 request next current mA value in brightness table (the
|
/openbmc/linux/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/ |
H A D | smu12_driver_if.h | 162 #define THROTTLER_STATUS_BIT_THM_GFX 5 183 uint16_t Current[2]; //[mA] indices: VDDCR_VDD, VDDCR_SOC 205 uint16_t VddTdcValue; //[mA] 206 uint16_t SocTdcValue; //[mA] 207 uint16_t VddEdcValue; //[mA] 208 uint16_t SocEdcValue; //[mA] 218 #define WORKLOAD_PPLIB_CUSTOM_BIT 5 226 #define TABLE_MOMENTARY_PM 5 // Called by Tools
|
H A D | smu13_driver_if_yellow_carp.h | 149 #define THROTTLER_STATUS_BIT_THM_GFX 5 170 uint16_t Current[2]; //[mA] indices: VDDCR_VDD, VDDCR_SOC 190 uint16_t VddTdcValue; //[mA] 191 uint16_t SocTdcValue; //[mA] 192 uint16_t VddEdcValue; //[mA] 193 uint16_t SocEdcValue; //[mA] 208 #define WORKLOAD_PPLIB_CUSTOM_BIT 5 216 #define TABLE_MOMENTARY_PM 5 // Called by Tools
|
/openbmc/linux/include/dt-bindings/usb/ |
H A D | pd.h | 27 #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ 30 #define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) argument 32 #define PDO_FIXED(mv, ma, flags) \ argument 34 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) 52 #define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ 56 #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) argument 71 #define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */ 80 #define PDO_PPS_APDO_MAX_CURR(ma) \ argument 81 ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT) 118 #define IDH_PTYPE_AMA 5 [all …]
|
/openbmc/linux/drivers/pinctrl/uniphier/ |
H A D | pinctrl-uniphier.h | 60 UNIPHIER_PIN_DRV_1BIT, /* 2 level control: 4/8 mA */ 61 UNIPHIER_PIN_DRV_2BIT, /* 4 level control: 8/12/16/20 mA */ 62 UNIPHIER_PIN_DRV_3BIT, /* 8 level control: 4/5/7/9/11/12/14/16 mA */ 63 UNIPHIER_PIN_DRV_FIXED4, /* fixed to 4mA */ 64 UNIPHIER_PIN_DRV_FIXED5, /* fixed to 5mA */ 65 UNIPHIER_PIN_DRV_FIXED8, /* fixed to 8mA */
|
/openbmc/linux/drivers/power/supply/ |
H A D | axp288_charger.c | 31 #define PS_STAT_VBUS_PRESENT BIT(5) 35 #define CHRG_STAT_BAT_PRESENT BIT(5) 41 #define VBUS_ISPOUT_CUR_LIM_900MA 0x0 /* 900mA */ 42 #define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */ 43 #define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */ 44 #define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */ 54 #define CHRG_CCCV_CC_OFFSET 200 /* 200mA */ 55 #define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */ 58 #define CHRG_CCCV_CV_BIT_POS 5 70 #define CNTL2_CHG_OUT_TURNON BIT(5) [all …]
|
H A D | ucs1002_power.c | 30 * weighting of the registers is given in mA/hrs. 43 # define F_RESET BIT(5) 54 # define F_M2_PIN BIT(5) 58 # define F_ACTIVE_MODE_MASK GENMASK(5, 3) 75 # define F_EM_EN_SET BIT(5) 81 # define V_SET_ACTIVE_MODE_MASK GENMASK(5, 3) 147 * B0: 0.01084 mA/h rounded to 11 uA/h in ucs1002_get_charge() 148 * B1: 0.02169 mA/h rounded to 22 uA/h in ucs1002_get_charge() 149 * B2: 0.04340 mA/h rounded to 43 uA/h in ucs1002_get_charge() 150 * B3: 0.08676 mA/h rounded to 87 uA/h in ucs1002_get_charge() [all …]
|
/openbmc/linux/drivers/comedi/drivers/ |
H A D | dt2815.c | 23 * 0 == unipolar 5V (0V -- +5V) 24 * 1 == bipolar 5V (-5V -- +5V) 26 * 0 == disabled (0mA -- +32mAV) 27 * 1 == enabled (+4mA -- +20mAV) 29 * 0 == program 1 (see manual table 5-4) 30 * 1 == program 2 (see manual table 5-4) 31 * 2 == program 3 (see manual table 5-4) 32 * 3 == program 4 (see manual table 5-4) 33 * [5] - Analog output 0 range configuration 40 * [10] - Analog output 5 range configuration (same options) [all …]
|
/openbmc/u-boot/include/power/ |
H A D | sandbox_pmic.h | 72 /* BUCK1 Amperage: min: 150mA, step: 25mA, max: 250mA */ 87 /* LDO1 Amperage: min: 100mA, step: 50mA, max: 200mA */ 113 #define SANDBOX_BUCK3_PLATNAME "buck_SUPPLY_1.5V"
|
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | mediatek,mt8183-pinctrl.yaml | 47 maxItems: 5 122 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they 123 can support 0.125/0.25/0.5/1mA adjustment. If we enable specific 126 When E1=0/E0=0, the strength is 0.125mA. 127 When E1=0/E0=1, the strength is 0.25mA. 128 When E1=1/E0=0, the strength is 0.5mA. 129 When E1=1/E0=1, the strength is 1mA. 137 5: (E1, E0, EN) = (1, 0, 1) 142 enum: [0, 1, 2, 3, 4, 5, 6, 7]
|