| /openbmc/linux/include/dt-bindings/clock/ |
| H A D | rk3399-ddr.h | 45 /* DDR3-2133 (11-11-11) */
47 /* DDR3-2133 (12-12-12) */
49 /* DDR3-2133 (13-13-13) */
51 /* DDR3-2133 (14-14-14) */
|
| /openbmc/u-boot/drivers/ddr/marvell/a38x/ |
| H A D | ddr3_training_db.c | 99 /* DDR3-2133K* */
101 /* DDR3-2133L */
103 /* DDR3-2133M */
105 /* DDR3-2133N* */
161 /* DDR3-2133K* */
163 /* DDR3-2133L */
165 /* DDR3-2133M */
167 /* DDR3-2133N* */
|
| /openbmc/u-boot/board/freescale/ls1088a/ |
| H A D | README | 49 chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
115 chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
|
| /openbmc/u-boot/board/freescale/t208xqds/ |
| H A D | t2081_nand_rcw.cfg | 4 #Core/DDR: 1533Mhz/2133MT/s
|
| H A D | t2081_sd_rcw.cfg | 4 #Core/DDR: 1533Mhz/2133MT/s
|
| H A D | t2081_spi_rcw.cfg | 4 #Core/DDR: 1533Mhz/2133MT/s
|
| H A D | t2080_spi_rcw.cfg | 5 #SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s
|
| H A D | t2080_sd_rcw.cfg | 5 #SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s
|
| H A D | t2080_nand_rcw.cfg | 5 #SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s
|
| H A D | README | 55 - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
|
| /openbmc/openbmc/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth/ |
| H A D | 0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch | 15 index 2133fbc..1fc9245 100755
|
| /openbmc/u-boot/board/freescale/ls1046aqds/ |
| H A D | README | 23 - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
|
| /openbmc/u-boot/board/freescale/ls1046ardb/ |
| H A D | README | 27 - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
|
| /openbmc/u-boot/board/freescale/t4qds/ |
| H A D | README | 27 Supports rates of 1866 up to 2133 MHz data-rate
32 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time
|
| /openbmc/u-boot/arch/arm/mach-uniphier/ |
| H A D | boards.c | 89 .dram_freq = 2133,
|
| /openbmc/phosphor-dbus-interfaces/yaml/xyz/openbmc_project/BIOSConfig/ |
| H A D | Manager.interface.yaml | 78 {"OneOf", "2133", "enum1"},
|
| /openbmc/u-boot/board/freescale/ls2080ardb/ |
| H A D | README | 24 chip-selects and two DIMM connectors. Support is up to 2133MT/s.
|
| /openbmc/bios-settings-mgr/ |
| H A D | README.md | 95 { "optionstring": "2133", "optionvalue": "enum1" },
|
| /openbmc/linux/drivers/clk/axis/ |
| H A D | clk-artpec6.c | 67 case 0: /* DDR3-2133 mode */ in of_artpec6_clkctrl_setup()
|
| /openbmc/u-boot/drivers/ddr/fsl/ |
| H A D | ctrl_regs.c | 77 * 11 for <= 2133MT/s
359 * max(3nCK, 6ns) for DDR3-1333, 1600, 1866, 2133 in set_timing_cfg_0()
702 * max(3nCK, 5ns) for DDR3-1600, 1866, 2133 in set_timing_cfg_2()
745 (ddr_freq > 2133 ? 0x3 : in set_ddr_sdram_rcw()
750 (ddr_freq > 2133 ? 0x1 : 0)); in set_ddr_sdram_rcw()
1192 /* for DDR4-1600/1866/2133 */ in set_ddr_sdram_mode_9()
1227 /* for DDR4-1600/1866/2133 */ in set_ddr_sdram_mode_9()
2639 else if (ddr_freq <= 2133) in compute_fsl_memctl_config_regs()
|
| /openbmc/u-boot/board/freescale/ls2080aqds/ |
| H A D | README | 25 chip-selects and two DIMM connectors. Support is up to 2133MT/s.
|
| /openbmc/openpower-vpd-parser/vpd-manager/src/ |
| H A D | isdimm_parser.cpp | 180 // 8 - DDR4-2133 in getDDR4FruNumber()
|
| /openbmc/u-boot/include/ |
| H A D | fsl_ddr_sdram.h | 190 #define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */
|
| /openbmc/linux/drivers/platform/x86/hp/ |
| H A D | hp_accel.c | 194 AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
|
| /openbmc/u-boot/arch/arm/mach-uniphier/dram/ |
| H A D | umc-pxs2.c | 615 case 2133: in uniphier_pxs2_umc_init()
|