/openbmc/u-boot/include/configs/ |
H A D | pogo_e02.h | 41 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 44 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 45 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 53 "bootm 0x00800000 0x01100000" 57 "32M(rootfs),-(data)\0"\ 58 "mtdids=nand0=orion_nand\0"\ 59 "bootargs_console=console=ttyS0,115200\0" \ 60 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 61 "ext2load usb 0:1 0x01100000 /uInitrd\0" 67 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ [all …]
|
H A D | UCP1020.h | 27 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1" 80 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 86 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 89 #define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000 92 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 117 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 118 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 120 #define CONFIG_SYS_CCSRBAR 0xffe00000 140 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 146 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/display/ |
H A D | allwinner,sun8i-a83t-de2-mixer.yaml | 16 - allwinner,sun8i-a83t-de2-mixer-0 18 - allwinner,sun8i-h3-de2-mixer-0 19 - allwinner,sun8i-r40-de2-mixer-0 22 - allwinner,sun20i-d1-de2-mixer-0 24 - allwinner,sun50i-a64-de2-mixer-0 26 - allwinner,sun50i-h6-de3-mixer-0 51 port@0: 80 compatible = "allwinner,sun8i-a83t-de2-mixer-0"; 81 reg = <0x01100000 0x100000>; 90 #size-cells = <0>; [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-ls102xa/ |
H A D | config.h | 9 #define OCRAM_BASE_ADDR 0x10000000 10 #define OCRAM_SIZE 0x00010000 11 #define OCRAM_BASE_S_ADDR 0x10010000 12 #define OCRAM_S_SIZE 0x00010000 14 #define CONFIG_SYS_IMMR 0x01000000 15 #define CONFIG_SYS_DCSRBAR 0x20000000 17 #define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000) 18 #define SYS_FSL_DCSR_RCPM_ADDR (CONFIG_SYS_DCSRBAR + 0x00222000) 20 #define SYS_FSL_GIC_ADDR (CONFIG_SYS_IMMR + 0x00400000) 21 #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/cache/ |
H A D | qcom,llcc.yaml | 162 reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>, 163 <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, 164 <0 0x01300000 0 0x50000>;
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | p2020rdb-pc.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x1000000>; 44 partition@0 { 47 reg = <0x0 0x00040000>; 54 reg = <0x00040000 0x00040000>; 60 reg = <0x00080000 0x00380000>; 66 reg = <0x00400000 0x00b00000>; 74 reg = <0x00f00000 0x00100000>; 80 nand@1,0 { 85 reg = <0x1 0x0 0x40000>; [all …]
|
H A D | p1020rdb-pc.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x1000000>; 44 partition@0 { 47 reg = <0x0 0x00040000>; 54 reg = <0x00040000 0x00040000>; 60 reg = <0x00080000 0x00380000>; 66 reg = <0x00400000 0x00b00000>; 74 reg = <0x00f00000 0x00100000>; 80 nand@1,0 { 85 reg = <0x1 0x0 0x40000>; [all …]
|
H A D | p1020rdb.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x1000000>; 44 partition@0 { 47 reg = <0x0 0x00040000>; 54 reg = <0x00040000 0x00040000>; 61 reg = <0x00080000 0x00380000>; 68 reg = <0x00400000 0x00b00000>; 76 reg = <0x00f00000 0x00100000>; 82 nand@1,0 { 87 reg = <0x1 0x0 0x40000>; [all …]
|
H A D | p2020rdb.dts | 29 reg = <0 0xffe05000 0 0x1000>; 32 ranges = <0x0 0x0 0x0 0xef000000 0x01000000 33 0x1 0x0 0x0 0xffa00000 0x00040000 34 0x2 0x0 0x0 0xffb00000 0x00020000>; 36 nor@0,0 { 40 reg = <0x0 0x0 0x1000000>; 44 partition@0 { 47 reg = <0x0 0x00040000>; 54 reg = <0x00040000 0x00040000>; 61 reg = <0x00080000 0x00380000>; [all …]
|
H A D | p1021rdb-pc.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x1000000>; 44 partition@0 { 47 reg = <0x0 0x00040000>; 54 reg = <0x00040000 0x00040000>; 60 reg = <0x00080000 0x00380000>; 66 reg = <0x00400000 0x00ac0000>; 73 reg = <0x00ec0000 0x00040000>; 82 reg = <0x00f00000 0x00100000>; 87 nand@1,0 { [all …]
|
H A D | p1021mds.dts | 23 reg = <0x0 0xffe05000 0x0 0x1000>; 26 ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 27 0x1 0x0 0x0 0xf8000000 0x00008000 28 0x2 0x0 0x0 0xf8010000 0x00020000 29 0x3 0x0 0x0 0xf8020000 0x00020000>; 31 nand@0,0 { 36 reg = <0x0 0x0 0x40000>; 38 partition@0 { 41 reg = <0x0 0x00100000>; 48 reg = <0x00100000 0x00100000>; [all …]
|
H A D | p1025rdb.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x1000000>; 44 partition@0 { 47 reg = <0x0 0x00040000>; 54 reg = <0x00040000 0x00040000>; 60 reg = <0x00080000 0x00380000>; 66 reg = <0x00400000 0x00b00000>; 74 reg = <0x00f00000 0x00100000>; 80 nand@1,0 { 85 reg = <0x1 0x0 0x40000>; [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ |
H A D | immap_lsch2.h | 11 #define CONFIG_SYS_IMMR 0x01000000 12 #define CONFIG_SYS_DCSRBAR 0x20000000 13 #define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00140000) 14 #define CONFIG_SYS_DCSR_COP_CCP_ADDR (CONFIG_SYS_DCSRBAR + 0x02008040) 16 #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) 17 #define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000) 18 #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) 19 #define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000) 20 #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) 21 #define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) [all …]
|
H A D | immap_lsch3.h | 12 #define CONFIG_SYS_IMMR 0x01000000 13 #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) 14 #define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + 0x00090000) 15 #define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000 16 #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000) 17 #define CONFIG_SYS_FSL_PMU_ADDR (CONFIG_SYS_IMMR + 0x00E30000) 19 #define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00e88180) 21 #define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00E60000) 23 #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000) 24 #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000) [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | da850-lcdk.dts | 25 /* 128 MB DDR2 SDRAM @ 0xc0000000 */ 26 reg = <0xc0000000 0x08000000>; 36 reg = <0xc3000000 0x1000000>; 89 #size-cells = <0>; 93 #size-cells = <0>; 95 port@0 { 96 reg = <0>; 136 0x00 0x00101010 0x00f0f0f0 138 0x04 0x00000110 0x00000ff0 144 /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */ [all …]
|
H A D | da850-evm.dts | 32 pinctrl-0 = <&ecap2_pins>; 40 pwms = <&ecap2 0 50000 0>; 41 brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; 48 pinctrl-0 = <&lcd_pins>; 59 ac-bias-intrpt = <0>; 62 fdd = <0x80>; 63 sync-edge = <0>; 65 raster-order = <0>; 66 fifo-th = <0>; 81 hsync-active = <0>; [all …]
|
H A D | sunxi-h3-h5.dtsi | 86 #clock-cells = <0>; 93 #clock-cells = <0>; 100 #clock-cells = <0>; 122 reg = <0x01000000 0x100000>; 133 compatible = "allwinner,sun8i-h3-de2-mixer-0"; 134 reg = <0x01100000 0x100000>; 143 #size-cells = <0>; 158 reg = <0x01c00000 0x1000>; 163 reg = <0x01c02000 0x1000>; 173 reg = <0x01c0c000 0x1000>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/ti/davinci/ |
H A D | da850-lcdk.dts | 24 /* 128 MB DDR2 SDRAM @ 0xc0000000 */ 25 reg = <0xc0000000 0x08000000>; 35 reg = <0xc3000000 0x1000000>; 122 #size-cells = <0>; 126 #size-cells = <0>; 128 port@0 { 129 reg = <0>; 205 0x00 0x00101010 0x00f0f0f0 207 0x04 0x00000110 0x00000ff0 213 /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */ [all …]
|
H A D | da850-evm.dts | 29 pinctrl-0 = <&ecap2_pins>; 37 pwms = <&ecap2 0 50000 0>; 38 brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; 45 pinctrl-0 = <&lcd_pins>; 56 ac-bias-intrpt = <0>; 59 fdd = <0x80>; 60 sync-edge = <0>; 62 raster-order = <0>; 63 fifo-th = <0>; 78 hsync-active = <0>; [all …]
|
/openbmc/linux/arch/arm/net/ |
H A D | bpf_jit_32.h | 12 #define ARM_R0 0 29 #define ARM_COND_EQ 0x0 /* == */ 30 #define ARM_COND_NE 0x1 /* != */ 31 #define ARM_COND_CS 0x2 /* unsigned >= */ 33 #define ARM_COND_CC 0x3 /* unsigned < */ 35 #define ARM_COND_MI 0x4 /* < 0 */ 36 #define ARM_COND_PL 0x5 /* >= 0 */ 37 #define ARM_COND_VS 0x6 /* Signed Overflow */ 38 #define ARM_COND_VC 0x7 /* No Signed Overflow */ 39 #define ARM_COND_HI 0x8 /* unsigned > */ [all …]
|
/openbmc/linux/drivers/net/wireless/realtek/rtl8xxxu/ |
H A D | rtl8xxxu_8723b.c | 36 {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, 37 {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, 38 {0x430, 0x00}, {0x431, 0x00}, 39 {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, 40 {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, 41 {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, 42 {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, 43 {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, 44 {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, 45 {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, [all …]
|
/openbmc/u-boot/drivers/pci/ |
H A D | pcie_imx.c | 23 #define PCI_ACCESS_READ 0 27 #define MX6_DBI_ADDR 0x08ffc000 28 #define MX6_IO_ADDR 0x08000000 29 #define MX6_MEM_ADDR 0x08100000 30 #define MX6_ROOT_ADDR 0x08f00000 32 #define MX6_DBI_ADDR 0x01ffc000 33 #define MX6_IO_ADDR 0x01000000 34 #define MX6_MEM_ADDR 0x01100000 35 #define MX6_ROOT_ADDR 0x01f00000 37 #define MX6_DBI_SIZE 0x4000 [all …]
|
/openbmc/linux/arch/arm/boot/dts/allwinner/ |
H A D | sun8i-v3s.dtsi | 72 #size-cells = <0>; 74 cpu@0 { 77 reg = <0>; 102 #clock-cells = <0>; 110 #clock-cells = <0>; 126 reg = <0x01000000 0x10000>; 138 reg = <0x01100000 0x100000>; 139 clocks = <&display_clocks 0>, 143 resets = <&display_clocks 0>; 147 #size-cells = <0>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/qcom/ |
H A D | qcom-sdx55.dtsi | 20 qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>; 25 reg = <0 0>; 31 #clock-cells = <0>; 38 #clock-cells = <0>; 44 #clock-cells = <0>; 51 #size-cells = <0>; 53 cpu0: cpu@0 { 56 reg = <0x0>; 108 reg = <0x8fc00000 0x80000>; 113 reg = <0x8fc80000 0x40000>; [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-mx6/ |
H A D | imx-regs.h | 11 #define ROMCP_ARB_BASE_ADDR 0x00000000 12 #define ROMCP_ARB_END_ADDR 0x000FFFFF 15 #define GPU_2D_ARB_BASE_ADDR 0x02200000 16 #define GPU_2D_ARB_END_ADDR 0x02203FFF 17 #define OPENVG_ARB_BASE_ADDR 0x02204000 18 #define OPENVG_ARB_END_ADDR 0x02207FFF 20 #define CAAM_ARB_BASE_ADDR 0x00100000 21 #define CAAM_ARB_END_ADDR 0x00107FFF 22 #define GPU_ARB_BASE_ADDR 0x01800000 23 #define GPU_ARB_END_ADDR 0x01803FFF [all …]
|