/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap36xx-clocks.dtsi | 8 dpll4_ck: dpll4_ck@d00 { 9 #clock-cells = <0>; 12 reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>; 15 dpll4_m5x2_ck: dpll4_m5x2_ck@d00 { 16 #clock-cells = <0>; 19 ti,bit-shift = <0x1e>; 20 reg = <0x0d00>; 25 dpll4_m2x2_ck: dpll4_m2x2_ck@d00 { 26 #clock-cells = <0>; 29 ti,bit-shift = <0x1b>; [all …]
|
H A D | omap3xxx-clocks.dtsi | 9 #clock-cells = <0>; 15 #clock-cells = <0>; 18 reg = <0x0d40>; 22 #clock-cells = <0>; 27 reg = <0x1270>; 32 #clock-cells = <0>; 35 reg = <0x0d70>; 40 #clock-cells = <0>; 48 #clock-cells = <0>; 56 #clock-cells = <0>; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | omap36xx-clocks.dtsi | 11 dpll4_ck: dpll4_ck@d00 { 12 #clock-cells = <0>; 15 reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>; 18 dpll4_m5x2_ck: dpll4_m5x2_ck@d00 { 19 #clock-cells = <0>; 22 ti,bit-shift = <0x1e>; 23 reg = <0x0d00>; 28 dpll4_m2x2_ck: dpll4_m2x2_ck@d00 { 29 #clock-cells = <0>; 32 ti,bit-shift = <0x1b>; [all …]
|
H A D | omap3xxx-clocks.dtsi | 12 #clock-cells = <0>; 18 #clock-cells = <0>; 21 reg = <0x0d40>; 25 #clock-cells = <0>; 30 reg = <0x1270>; 35 #clock-cells = <0>; 38 reg = <0x0d70>; 43 #clock-cells = <0>; 51 #clock-cells = <0>; 59 #clock-cells = <0>; [all …]
|
H A D | stm32f429-disco-u-boot.dtsi | 36 reg = <0xA0000000 0x1000>; 37 clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; 38 pinctrl-0 = <&fmc_pins>; 145 usart1_pins_a: usart1@0 { 155 fmc_pins: fmc@0 { 172 <STM32_PINMUX('D', 0, AF12)>, /* D02 */ 174 <STM32_PINMUX('D',14, AF12)>, /* D00 */ 176 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */ 183 <STM32_PINMUX('G', 0, AF12)>, /* A10 */ 193 <STM32_PINMUX('F', 0, AF12)>, /* A00 */ [all …]
|
/openbmc/phosphor-logging/extensions/openpower-pels/registry/ |
H A D | B_component_ids.json | 11 "0A00": "hostboot: fsi", 12 "0B00": "hostboot: targ", 13 "0C00": "hostboot: hwas", 14 "0D00": "hostboot: fsiscom", string 15 "0E00": "hostboot: eeprom", 16 "0F00": "hostboot: intr", 30 "1D00": "hostboot: vpd",
|
/openbmc/linux/drivers/zorro/ |
H A D | zorro.ids | 16 0a00 [SCSI Host Adapter] 36 0a00 A590/A2052/A2058/A2091 [RAM Expansion] 58 0c00 A1000 [SCSI Host Adapter] 59 0e00 Escort [SCSI Host Adapter] 97 0a00 A4066 [Ethernet Card] 106 0a00 500RX/2000 [RAM Expansion] 107 0b00 2400zi [Modem] 108 0c00 500XP/SupraDrive WordSync [SCSI Host Adapter] 109 0d00 SupraDrive WordSync II [SCSI Host Adapter] 125 0e00 DKM 3128 [RAM Expansion] [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/sound/ |
H A D | img,spdif-out.txt | 7 - #sound-dai-cells : Must be equal to 0 32 spdif_out: spdif-out@18100d00 { 34 reg = <0x18100D00 0x100>; 36 dmas = <&mdc 14 0xffffffff 0>; 43 #sound-dai-cells = <0>;
|
/openbmc/linux/arch/powerpc/boot/dts/ |
H A D | cm5200.dts | 55 phy0: ethernet-phy@0 { 56 reg = <0>; 64 i2c@3d00 { 76 flash@0,0 { 78 reg = <0 0 0x2000000>;
|
H A D | a3m071.dts | 26 ranges = <0 0xf0000000 0x0000c000>; 27 reg = <0xf0000000 0x00000100>; 28 bus-frequency = <0>; /* From boot loader */ 29 system-frequency = <0>; /* From boot loader */ 41 reg = <0x2000 0x100>; 42 interrupts = <2 1 0>; 63 reg = <0x2c00 0x100>; 64 interrupts = <2 4 0>; 73 reg = <0x03>; 81 i2c@3d00 { [all …]
|
H A D | uc101.dts | 75 phy0: ethernet-phy@0 { 77 reg = <0>; 81 i2c@3d00 { 91 reg = <0x2c>; 95 reg = <0x51>; 105 ranges = <0 0 0xff800000 0x00800000 106 1 0 0x80000000 0x00800000 107 3 0 0x80000000 0x00800000>; 109 flash@0,0 { 111 reg = <0 0 0x00800000>; [all …]
|
H A D | motionpro.dts | 67 i2c@3d00 { 74 reg = <0x68>; 80 reg = <0x8000 0x4000>; 89 ranges = <0 0 0xff000000 0x01000000 90 1 0 0x50000000 0x00010000 91 2 0 0x50010000 0x00010000 92 3 0 0x50020000 0x00010000>; 95 kollmorgen@1,0 { 97 reg = <1 0 0x10000>; 98 interrupts = <1 1 0>; [all …]
|
H A D | digsy_mtc.dts | 19 memory@0 { 20 reg = <0x00000000 0x02000000>; // 32MB 57 phy0: ethernet-phy@0 { 58 reg = <0>; 62 i2c@3d00 { 65 reg = <0x50>; 70 reg = <0x56>; 75 reg = <0x68>; 85 interrupt-map-mask = <0xf800 0 0 7>; 86 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 [all …]
|
H A D | a4m072.dts | 27 ranges = <0 0xf0000000 0x0000c000>; 28 reg = <0xf0000000 0x00000100>; 29 bus-frequency = <0>; /* From boot loader */ 30 system-frequency = <0>; /* From boot loader */ 33 fsl,init-ext-48mhz-en = <0x0>; 34 fsl,init-fd-enable = <0x01>; 35 fsl,init-fd-counters = <0x3333>; 44 reg = <0x2000 0x100>; 45 interrupts = <2 1 0>; 50 reg = <0x2200 0x100>; [all …]
|
H A D | mucmc52.dts | 78 phy0: ethernet-phy@0 { 80 reg = <0>; 84 i2c@3d00 { 91 reg = <0x2c>; 95 reg = <0x51>; 101 interrupt-map-mask = <0xf800 0 0 7>; 103 /* IDSEL 0x10 */ 104 0x8000 0 0 1 &mpc5200_pic 0 3 3 105 0x8000 0 0 2 &mpc5200_pic 0 3 3 106 0x8000 0 0 3 &mpc5200_pic 0 2 3 [all …]
|
H A D | charon.dts | 23 #size-cells = <0>; 25 PowerPC,5200@0 { 27 reg = <0>; 30 d-cache-size = <0x4000>; // L1, 16K 31 i-cache-size = <0x4000>; // L1, 16K 32 timebase-frequency = <0>; // from bootloader 33 bus-frequency = <0>; // from bootloader 34 clock-frequency = <0>; // from bootloader 38 memory@0 { 40 reg = <0x00000000 0x08000000>; // 128MB [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/reset/ |
H A D | img,pistachio-reset.txt | 26 reg = <0x18148000 0x1000>; 47 spdif_out: spdif-out@18100d00 {
|
/openbmc/linux/Documentation/devicetree/bindings/gpio/ |
H A D | 8xxx_gpio.txt | 48 reg = <0xc00 0x100>; 50 interrupts = <74 0x8>; 56 gpio2: gpio-controller@d00 { 59 reg = <0xd00 0x100>; 61 interrupts = <75 0x8>; 67 funkyfpga@0 {
|
/openbmc/linux/Documentation/arch/x86/ |
H A D | zero-page.rst | 25 0A0/010 ALL sys_desc_table System description table (struct sys_desc_table), 27 0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends 28 0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits 29 0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits 30 0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits 46 D00/1EC ALL eddbuf EDD data (array of struct edd_info)
|
/openbmc/linux/Documentation/devicetree/bindings/i2c/ |
H A D | i2c-mpc.yaml | 69 #size-cells = <0>; 71 reg = <0x1740 0x20>; 72 interrupts = <11 0x8>; 79 i2c@3d00 { 81 #size-cells = <0>; 83 reg = <0x3d00 0x40>; 84 interrupts = <2 15 0>; 93 #size-cells = <0>; 95 reg = <0x3100 0x100>;
|
/openbmc/linux/Documentation/devicetree/bindings/clock/ti/ |
H A D | gate.txt | 33 - #clock-cells : from common clock binding; shall be set to 0 47 #clock-cells = <0>; 50 reg = <0x0a00>; 55 #clock-cells = <0>; 58 reg = <0x0a00>; 63 #clock-cells = <0>; 66 reg = <0x0e00>; 67 ti,bit-shift = <0>; 71 #clock-cells = <0>; 74 reg = <0x059c>; [all …]
|
/openbmc/u-boot/arch/mips/dts/ |
H A D | mt7628a.dtsi | 10 #size-cells = <0>; 12 cpu@0 { 15 reg = <0>; 25 #address-cells = <0>; 33 reg = <0x10000000 0x200000>; 34 ranges = <0x0 0x10000000 0x1FFFFF>; 39 sysc: system-controller@0 { 41 reg = <0x0 0x100>; 47 offset = <0x34>; 48 mask = <0x1>; [all …]
|
/openbmc/u-boot/doc/ |
H A D | README.pblimage | 35 Write u-boot.pbl to eSPI flash from offset 0x0. 38 =>sf probe 0 39 =>sf erase 0 100000 40 =>sf write 100000 0 $filesize 44 Write u-boot.pbl to SD/MMC from offset 0x1000. 52 Write u-boot.pbl to Nand from offset 0x0. 56 =>nand erase 0 100000 57 =>nand write 100000 0 $filesize 94 09000d00 00000000
|
/openbmc/linux/arch/mips/boot/dts/ralink/ |
H A D | mt7628a.dtsi | 10 #size-cells = <0>; 12 cpu@0 { 15 reg = <0>; 25 #address-cells = <0>; 33 reg = <0x10000000 0x200000>; 34 ranges = <0x0 0x10000000 0x1FFFFF>; 39 sysc: system-controller@0 { 41 reg = <0x0 0x60>; 46 reg = <0x60 0x8>; 48 #size-cells = <0>; [all …]
|
/openbmc/linux/arch/mips/boot/dts/brcm/ |
H A D | bcm7125.dtsi | 9 #size-cells = <0>; 13 cpu@0 { 16 reg = <0>; 31 #address-cells = <0>; 41 #clock-cells = <0>; 47 #clock-cells = <0>; 57 ranges = <0 0x10000000 0x01000000>; 61 reg = <0x441400 0x30>, <0x441600 0x30>; 72 reg = <0x401800 0x30>; 81 reg = <0x400000 0xdc>; [all …]
|