Merge branch 'aspeed-dev-v2019.04' into aspeed-master-v2019.04

Merge branch 'ryan_port' into aspeed-dev-v2019.04

add class mdio for ehternet

Merge branch 'master' of git://git.denx.de/u-boot-net

net: remove CONFIG_MCAST_TFTP

No mainline board enables CONFIG_MCAST_TFTP and there have been
compilation issues with the code for some time. Additionally, it has a
potential buffer underrun issue (

net: remove CONFIG_MCAST_TFTP

No mainline board enables CONFIG_MCAST_TFTP and there have been
compilation issues with the code for some time. Additionally, it has a
potential buffer underrun issue (reported as a side note in
CVE-2018-18439).

Remove the multicast TFTP code but keep the driver API for the future
addition of IPv6.

Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

net: eth-uclass: Fix for DM USB ethernet support

When a USB ethernet device is halted, the device driver is removed. When
this happens the uclass private memory is freed and uclass_priv is set to
NU

net: eth-uclass: Fix for DM USB ethernet support

When a USB ethernet device is halted, the device driver is removed. When
this happens the uclass private memory is freed and uclass_priv is set to
NULL. This causes a data abort when uclass_priv->state is then set to
ETH_STATE_PASSIVE.

Fix it by checking if uclass_priv is NULL before setting uclass_priv->state

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: Only call halt on a driver that has been init'ed

With driver model, we were not checking if the state of the device was
marked as active before calling the halt function. Check that the device

net: Only call halt on a driver that has been init'ed

With driver model, we were not checking if the state of the device was
marked as active before calling the halt function. Check that the device
is probed and also marked as active. This avoids the case where we were
calling halt on the first device in net_init() and the driver would
operate on bogus data structures causing problems. In this case, the
priv was all 0, so halt() would close STDIN.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: Initialize as many ethernet devices as possible

On devices that have their first network interface provided by a FPGA,
the initialization of further interfaces will fail if the FPGA is not
yet

net: Initialize as many ethernet devices as possible

On devices that have their first network interface provided by a FPGA,
the initialization of further interfaces will fail if the FPGA is not
yet programmed. This leads to problems during factory setup when the
data is supposed to be loaded over secondary netowork interfaces.

To avoid this, use the uclass_{first,next}_device_check functions to
initialize as many ethernet devices as possible.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-net

net: Only access network devices after init

In the efi_loader main loop we call eth_rx() occasionally. This rx function
might end up calling into devices that haven't been initialized yet,
potential

net: Only access network devices after init

In the efi_loader main loop we call eth_rx() occasionally. This rx function
might end up calling into devices that haven't been initialized yet,
potentially resulting in a lot of transfer timeouts.

Instead, let's make sure the ethernet device is actually initialized before
reading from or writing to it.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()

Rename this function for consistency with env_get().

Signed-off-by: Simon Glass <sjg@chromium.org>

env: Rename getenv/_f() to env_get()

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few place

env: Rename getenv/_f() to env_get()

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()

Rename this function for consistency with env_set().

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot-net

net: core: avoid possible NULL pointer dereference

Checking if dev is NULL after dereferencing it does not make sense.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershber

net: core: avoid possible NULL pointer dereference

Checking if dev is NULL after dereferencing it does not make sense.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: core: cosmetic: A MAC address is not limited to SROM

Currently, we print that the MAC from the SROM does not match. It can be
many forms of ROM, so lets drop the S.

Signed-off-by: Olliver Schi

net: core: cosmetic: A MAC address is not limited to SROM

Currently, we print that the MAC from the SROM does not match. It can be
many forms of ROM, so lets drop the S.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: cosmetic: Do not use magic values for ARP_HLEN

Commit 674bb249825a ("net: cosmetic: Replace magic numbers in arp.c with
constants") introduced a nice define to replace the magic value 6 for
the

net: cosmetic: Do not use magic values for ARP_HLEN

Commit 674bb249825a ("net: cosmetic: Replace magic numbers in arp.c with
constants") introduced a nice define to replace the magic value 6 for
the ethernet hardware address. Replace more hardcoded instances of 6
which really reference the ARP_HLEN (iow the MAC/Hardware/Ethernet
address).

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: use random ethernet address if invalid and not zero

Use random ethernet address if the ethernet address found
is invalid, not zero and config for random address
is defined.

Signed-off-by: Siva

net: use random ethernet address if invalid and not zero

Use random ethernet address if the ethernet address found
is invalid, not zero and config for random address
is defined.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net