Merge branch 'aspeed-dev-v2019.04' into aspeed-master-v2019.04

Merge branch 'feature/rmii' into aspeed-dev-v2019.04

apply ncsi patch

Merge branch 'master' of git://git.denx.de/u-boot-net

net: remove CONFIG_MCAST_TFTP

No mainline board enables CONFIG_MCAST_TFTP and there have been
compilation issues with the code for some time. Additionally, it has a
potential buffer underrun issue (

net: remove CONFIG_MCAST_TFTP

No mainline board enables CONFIG_MCAST_TFTP and there have been
compilation issues with the code for some time. Additionally, it has a
potential buffer underrun issue (reported as a side note in
CVE-2018-18439).

Remove the multicast TFTP code but keep the driver API for the future
addition of IPv6.

Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: move ether_crc to tsec driver

ether_crc was added to the core net code in commit 53a5c424bf86
("multicast tftp: RFC2090") so that other drivers could use it. However
the only current user of it

net: move ether_crc to tsec driver

ether_crc was added to the core net code in commit 53a5c424bf86
("multicast tftp: RFC2090") so that other drivers could use it. However
the only current user of it is tsec.c so move it there.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: Consolidate UDP header functions

Make it possible to add TCP versions of the same, while reusing
IP portions. This patch should not change any behavior.

Signed-off-by: Duncan Hare <DH@Synoia.c

net: Consolidate UDP header functions

Make it possible to add TCP versions of the same, while reusing
IP portions. This patch should not change any behavior.

Signed-off-by: Duncan Hare <DH@Synoia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: Don't overwrite waiting packets with asynchronous replies

Peter originally sent a fix, but it breaks a number of other things.
This addresses the original reported issue in a different way.

Th

net: Don't overwrite waiting packets with asynchronous replies

Peter originally sent a fix, but it breaks a number of other things.
This addresses the original reported issue in a different way.

That report was:

> U-Boot has 1 common buffer to send Ethernet frames, pointed to by
> net_tx_packet. When sending to an IP address without knowing the MAC
> address, U-Boot makes an ARP request (using the arp_tx_packet buffer)
> to find out the MAC address of the IP addressr. When a matching ARP
> reply is received, U-Boot continues sending the frame stored in the
> net_tx_packet buffer.
>
> However, in the mean time, if U-Boot needs to send out any network
> packets (e.g. replying ping packets or ARP requests for its own IP
> address etc.), it will use the net_tx_packet buffer to prepare the
> new packet. Thus this buffer is no longer the original packet meant
> to be transmitted after the ARP reply. The original packet will be
> lost.

This instead uses the ARP tx buffer to send async replies in the case
where we are actively waiting for an ARP reply.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reported-by: Tran Tien Dat <peter.trantiendat@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

net: Add an accessor to know if waiting for ARP

This single-sources the state of the ARP.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewe

net: Add an accessor to know if waiting for ARP

This single-sources the state of the ARP.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

net.h: Include linux/if_ether.h to avoid duplication

There are plenty of existing drivers that have macros like ETH_ALEN
defined in their own source files. Now that we imported the kernel's
if_ether

net.h: Include linux/if_ether.h to avoid duplication

There are plenty of existing drivers that have macros like ETH_ALEN
defined in their own source files. Now that we imported the kernel's
if_ether.h to U-Boot we can reduce some duplication.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

net: Increase ethernet name string size to 20 chars

The 16 char ethernet name size is inadequate to hold the name of ethernet
name "DPMAC17@rgmii-id", which is a valid name in LX2160AQDS/LX2160ARDB.

net: Increase ethernet name string size to 20 chars

The 16 char ethernet name size is inadequate to hold the name of ethernet
name "DPMAC17@rgmii-id", which is a valid name in LX2160AQDS/LX2160ARDB.

Therefore, increase the name string size to 20 chars.

Reported-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Ioana Ciocoi Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: Consolidate the parsing of bootfile

The same basic parsing was implemented in tftp and nfs, so add a helper
function to do the work once.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

net: When checking prerequisites, consider boot_file_name

For net_boot_common, we allow the serverip to be specified as part of
the boot file name. For net commands that require serverip, include th

net: When checking prerequisites, consider boot_file_name

For net_boot_common, we allow the serverip to be specified as part of
the boot file name. For net commands that require serverip, include that
source as a valid specification of serverip.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Alexander Graf <agraf@suse.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: Prefer command line arguments

We can call commands like dhcp and bootp without arguments or with
explicit command line arguments that really should tell the code where
to look for files instead

net: Prefer command line arguments

We can call commands like dhcp and bootp without arguments or with
explicit command line arguments that really should tell the code where
to look for files instead.

Unfortunately, the current code simply overwrites command line arguments
in the dhcp case with dhcp values.

This patch allows the code to preserve the command line values if they
were set on the command line. That way the semantics are slightly more
intuitive.

The reason this patch does that by introducing a new variable is that we
can not rely on net_boot_file_name[0] being unset, as today it's
completely legal to call "dhcp" and afterwards run "tftp" and expect the
latter to repeat the same query as before. I would prefer not to break
that behavior in case anyone relies on it.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: Add new wol command - Wake on LAN

Add a new command 'wol': Wait for an incoming Wake-on-LAN packet or
time out if no WoL packed is received.
If the WoL packet contains a password, it is saved i

net: Add new wol command - Wake on LAN

Add a new command 'wol': Wait for an incoming Wake-on-LAN packet or
time out if no WoL packed is received.
If the WoL packet contains a password, it is saved in the environment
variable 'wolpassword' using the etherwake format (dot or colon
separated decimals).

Intended use case: a networked device should boot an alternate image.
It's attached to a network on a client site, modifying the DHCP server
configuration or setup of a tftp server is not allowed.
After power on the device waits a few seconds for a WoL packet. If a
packet is received, the device boots the alternate image. Otherwise
it boots the default image.

This method is a simple way to interact with a system via network even
if only the MAC address is known. Tools to send WoL packets are
available on all common platforms.

Some Ethernet drivers seem to pad the incoming packet. The additional
padding bytes might be recognized as Wake-on-LAN password bytes.

By default enabled in pengwyn_defconfig.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

net: fastboot: Merge AOSP UDP fastboot

Merge UDP fastboot support from AOSP:

https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8

Signed-off-by: Alex Kiernan <

net: fastboot: Merge AOSP UDP fastboot

Merge UDP fastboot support from AOSP:

https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Alex Deymo <deymo@google.com>
Signed-off-by: Jocelyn Bohr <bohr@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

SPDX: Convert a few files that were missed before

As part of the main conversion a few files were missed. These files had
additional whitespace after the '*' and before the SPDX tag and my
previous

SPDX: Convert a few files that were missed before

As part of the main conversion a few files were missed. These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict. This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

net: Move enetaddr env access code to env config instead of net config

In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

Thi

net: Move enetaddr env access code to env config instead of net config

In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

board/ti/am335x/built-in.o: In function `board_late_init':
board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>

show more ...

Handle NETCONSOLE and SPL enabled

NETCONSOLE isn't compiled in with SPL, so the include file needs to recognize that.

Signed-off-by: Jason Kridner <jdk@ti.com>
Cc: Joe Hershberger <joe.hershberger@

Handle NETCONSOLE and SPL enabled

NETCONSOLE isn't compiled in with SPL, so the include file needs to recognize that.

Signed-off-by: Jason Kridner <jdk@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

env: Rename some other getenv()-related functions

We are now using an env_ prefix for environment functions. Rename these
other functions as well, for consistency:

getenv_vlan()
getenv_bootm_

env: Rename some other getenv()-related functions

We are now using an env_ prefix for environment functions. Rename these
other functions as well, for consistency:

getenv_vlan()
getenv_bootm_size()
getenv_bootm_low()
getenv_bootm_mapsize()
env_get_default()

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...