i2c: add support for offset overflow in to address

Some devices (2 wire eeproms for example) use some bits from the chip
address to represent the high bits of the offset instead of or as well
as usi

i2c: add support for offset overflow in to address

Some devices (2 wire eeproms for example) use some bits from the chip
address to represent the high bits of the offset instead of or as well
as using multiple bytes for the offset, effectively stealing chip
addresses on the bus.

Add a chip offset mask that can be set for any i2c chip which gets
filled with the offset overflow during offset setup.

(cherry picked from commit 85968522b928e19a27aa79f0cb186c80b8b82e47)

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tan Siewert <tan.siewert@hetzner.com>
Link: https://patch.msgid.link/20250117094434.16641-2-tan.siewert@hetzner.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

show more ...

Merge tag 'pull-30nov18' of git://git.denx.de/u-boot-dm

Fix sound on sandbox
Convert TPM fully to DM
Tidy up sandbox I2C emulation
Add a 'make qcheck' target for faster testing
A few other misc thin

Merge tag 'pull-30nov18' of git://git.denx.de/u-boot-dm

Fix sound on sandbox
Convert TPM fully to DM
Tidy up sandbox I2C emulation
Add a 'make qcheck' target for faster testing
A few other misc things
(dropped the final patch which breaks clang for some reason)

show more ...

dm: sandbox: i2c: Add a new 'emulation parent' uclass

Sandbox i2c works using emulation drivers which are currently children of
the i2c device:

rtc_0: rtc@43 {
reg = <0x43>;
compatible = "sand

dm: sandbox: i2c: Add a new 'emulation parent' uclass

Sandbox i2c works using emulation drivers which are currently children of
the i2c device:

rtc_0: rtc@43 {
reg = <0x43>;
compatible = "sandbox-rtc";
emul {
compatible = "sandbox,i2c-rtc";
};
};

In this case the emulation device is attached to i2c bus on address 0x43
and provides the Real-Time-Clock (RTC) functionality.

However this is not ideal, since every device on an I2C bus has a child
device. This is only really the case for sandbox, but we want to avoid
special-case code for sandbox.

A better approach seems to be to add a separate node on the bus, an
'emulation parent'. This can be given a bogus address (such as 0xff) and
hides all the emulators away. Then we can use a phandle to point from the
device to the correct emualtor, and only on sandbox. The code to find an
emulator does not interfere with normal i2c operation.

Add a new UCLASS_I2C_EMUL_PARENT uclass which allows finding an emulator
given a bus, and finding a bus given an emulator. This will be used in a
follow-on patch.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

powerpc, 8260: remove support for mpc8260

There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,

powerpc, 8260: remove support for mpc8260

There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

show more ...

powerpc, 8xx: remove support for 8xx

There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so rem

powerpc, 8xx: remove support for 8xx

There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>

show more ...

dm: i2c: Convert uclass to livetree

Update the i2c uclass to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>

Drop digital thermometer and thermostat (DTT) drivers

This subsystem is quite old. It has been replaced with a driver-model
version (UCLASS_THERMAL). Boards are free to convert to that if required,

Drop digital thermometer and thermostat (DTT) drivers

This subsystem is quite old. It has been replaced with a driver-model
version (UCLASS_THERMAL). Boards are free to convert to that if required,
but here is a removal patch that could be applied in the meantime.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-i2c

i2c: Drop CONFIG_SYS_I2C_BOARD_LATE_INIT

This option is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

i2c: Drop CONFIG_SOFT_I2C_MULTI_BUS

This is not used by any board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Clean up board_f sequence a little
This series tries to remove #ifdefs from

i2c: Drop CONFIG_SOFT_I2C_MULTI_BUS

This is not used by any board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Clean up board_f sequence a little
This series tries to remove #ifdefs from the board_f init sequence. It
gets as far as I2C and then we need to discuss whether we can start to
remove the old I2C framework.

I think that ideally each entry in the init sequence should be enabled by
at most one CONFIG, which is in Kconfig and is not arch-specific.
END
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

i2c: Drop unused i2c_soft...() functions

These are not used in U-Boot. Manual relocation fixup is used by blackfin
but that is being removed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: i2c: mxc: Add early init

Add early i2c init function with conservative divider when the exact
clock rate is not available.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun

drivers: i2c: mxc: Add early init

Add early i2c init function with conservative divider when the exact
clock rate is not available.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-i2c

i2c: Fix the comment to match the function described

Use the correct function name in the function description.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

i2c: Fix the comment to match the function described

Use the correct function name in the function description.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: i2c: Add support for multiplexed I2C buses

Add a new I2C_MUX uclass. Devices in this class can multiplex between
several I2C buses, selecting them one at a time for use by the system.
The multip

dm: i2c: Add support for multiplexed I2C buses

Add a new I2C_MUX uclass. Devices in this class can multiplex between
several I2C buses, selecting them one at a time for use by the system.
The multiplexing mechanism is left to the driver to decide - it may be
controlled by GPIOs, for example.

The uclass supports only two methods: select() and deselect().

The current mux state is expected to be stored in the mux itself since
it is the only thing that knows how to make things work. The mux can
record the current state and then avoid switching unless it is necessary.
So select() can be skipped if the mux is already in the correct state.
Also deselect() can be made a nop if required.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: i2c: Add a function to transfer messages

Sometimes it is useful to be able to transfer a raw I2C message. This
happens when the chip address needs to be set manually, or when the data to
be sent

dm: i2c: Add a function to transfer messages

Sometimes it is useful to be able to transfer a raw I2C message. This
happens when the chip address needs to be set manually, or when the data to
be sent/received is in another buffer.

Add a function to provide access to this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...

dm: i2c: Move definitions to the top of the header file

Move the flags and struct definitions higher in the file so that we can
reference them with functions declared in the driver model section.

S

dm: i2c: Move definitions to the top of the header file

Move the flags and struct definitions higher in the file so that we can
reference them with functions declared in the driver model section.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...

dm: i2c: Correct comment nits in dm_i2c_reg_read/write()

Add documentation for the @dev parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

dm: i2c: Add a message debug function

Add a way to dump the contents of an I2C message for debugging purposes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'master' of git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-dm

dm: i2c: Add compatibility functions for dm_i2c_reg_read/write()

Add the legacy i2c_reg_read/write() functions to the compatibility layer
so that they can be used when CONFIG_DM_I2C_COMPAT is define

dm: i2c: Add compatibility functions for dm_i2c_reg_read/write()

Add the legacy i2c_reg_read/write() functions to the compatibility layer
so that they can be used when CONFIG_DM_I2C_COMPAT is defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...