|
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07 |
|
| #
83d290c5 |
| 06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
|
Revision tags: v2018.03, v2018.01, v2017.11, v2016.07, openbmc-20160624-1 |
|
| #
08ca213a |
| 24-May-2016 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
|
| #
d7d00031 |
| 20-May-2016 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-mips
|
| #
d92ea983 |
| 17-Feb-2016 |
Stanislav Galabov <sgalabov@gmail.com> |
Properly calculate ATA_SECTORWORDS, using a fixed-size integer, so it works for both 32-bit and 64-bit targets
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
|
|
Revision tags: v2016.01-rc1, v2015.10, v2015.10-rc5, v2015.10-rc4, v2015.10-rc3, v2015.10-rc2, v2015.10-rc1, v2015.07, v2015.07-rc3, v2015.07-rc2, v2015.07-rc1, v2015.04, v2015.04-rc5, v2015.04-rc4, v2015.04-rc3, v2015.04-rc2, v2015.04-rc1, v2015.01, v2015.01-rc4, v2015.01-rc3, v2015.01-rc2, v2015.01-rc1, v2014.10, v2014.10-rc3, v2014.10-rc2, v2014.10-rc1, v2014.07, v2014.07-rc4, v2014.07-rc3, v2014.07-rc2, v2014.07-rc1, v2014.04, v2014.04-rc3, v2014.04-rc2, v2014.04-rc1, v2014.01, v2014.01-rc3, v2014.01-rc2, v2014.01-rc1, v2013.10, v2013.10-rc4, v2013.10-rc3, v2013.10-rc2, v2013.10-rc1 |
|
| #
326ea986 |
| 31-Jul-2013 |
Stefano Babic <sbabic@denx.de> |
Merge git://git.denx.de/u-boot-arm
Conflicts:
board/freescale/mx6qsabrelite/Makefile
board/freescale/mx6qsabrelite/mx6qsabrelite.c
include/configs/mx6qsabrelite.h
Signed-off-by: Stefano Babic <s
Merge git://git.denx.de/u-boot-arm
Conflicts:
board/freescale/mx6qsabrelite/Makefile
board/freescale/mx6qsabrelite/mx6qsabrelite.c
include/configs/mx6qsabrelite.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
show more ...
|
| #
8b485ba1 |
| 25-Jul-2013 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master' into u-boot-arm/master
|
|
Revision tags: v2013.07, v2013.07-rc3 |
|
| #
1a459660 |
| 08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
|
|
Revision tags: v2013.07-rc2, v2013.07-rc1, v2013.04, v2013.04-rc3, v2013.04-rc2, v2013.04-rc1, v2013.01.01, v2013.01, v2013.01-rc3, v2013.01-rc2 |
|
| #
3e4d27b0 |
| 10-Nov-2012 |
Stefano Babic <sbabic@denx.de> |
Merge git://git.denx.de/u-boot
|
|
Revision tags: v2013.01-rc1 |
|
| #
766b16fe |
| 29-Oct-2012 |
Marc Jones <marc.jones@chromium.org> |
ahci: Perform SATA flush after disk write.
Writes in u-boot are so rare, and the logic to know when is
the last write and do a flush only there is sufficiently
difficult. Just do a flush after every
ahci: Perform SATA flush after disk write.
Writes in u-boot are so rare, and the logic to know when is
the last write and do a flush only there is sufficiently
difficult. Just do a flush after every write. This incurs,
usually, one extra flush when the rare writes do happen.
Signed-off-by: Marc Jones <marc.jones@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
show more ...
|
|
Revision tags: v2012.10, v2012.10-rc3, v2012.10-rc2, v2012.10-rc1, v2012.07, v2012.07-rc3, v2012.07-rc2, v2012.07-rc1, v2012.04.01, v2012.04, v2012.04-rc3, v2012.04-rc2, v2012.04-rc1, v2011.12, v2011.12-rc3, v2011.12-rc2, v2011.12-rc1 |
|
| #
2b224609 |
| 10-Nov-2011 |
Reinhard Arlt <reinhard.arlt@esd.eu> |
CPCI750: Add CPCI-HD/2 support
This patch adds support for the esd CPCI-HD/2 board to u-boot for CPCI-CPU/750.
As the primary devices on the CPCI-HD/2 board are connected to device 1 and 3,
the devi
CPCI750: Add CPCI-HD/2 support
This patch adds support for the esd CPCI-HD/2 board to u-boot for CPCI-CPU/750.
As the primary devices on the CPCI-HD/2 board are connected to device 1 and 3,
the device must be swapped.
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
show more ...
|
|
Revision tags: v2011.09, v2011.09-rc2, v2011.09-rc1, v2011.06, v2011.06-rc3, v2011.06-rc2, v2011.06-rc1, v2011.03, v2011.03-rc2, v2011.03-rc1, v2010.12, v2010.12-rc3, v2010.12-rc2, v2010.12-rc1, v2010.09, v2010.09-rc2, v2010.09-rc1, v2010.06, v2010.06-rc3, v2010.06-rc2, v2010.06-rc1, v2010.03, v2010.03-rc3, v2010.03-rc2, v2010.03-rc1, v2009.11.1, v2009.11, v2009.11-rc2, v2009.11-rc1, v2009.08, v2009.08-rc3, v2009.08-rc2, v2009.08-rc1, v2009.06, v2009.06-rc3, v2009.06-rc2, v2009.06-rc1, v2009.03, v2009.03-rc2, v2009.03-rc1, v2009.01, v2009.01-rc3, v2009.01-rc2 |
|
| #
cb547320 |
| 17-Dec-2008 |
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/con
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/configs/atngw100.h
include/configs/atstk1002.h
include/configs/atstk1003.h
include/configs/atstk1004.h
include/configs/atstk1006.h
include/configs/favr-32-ezkit.h
include/configs/hammerhead.h
include/configs/mimc200.h
show more ...
|
|
Revision tags: v2009.01-rc1 |
|
| #
f61f1e15 |
| 21-Oct-2008 |
Stefan Roese <sr@denx.de> |
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
|
| #
50bd0057 |
| 21-Oct-2008 |
Markus Klotzbuecher <mk@denx.de> |
Merge git://git.denx.de/u-boot into x1
Conflicts:
drivers/usb/usb_ohci.c
|
| #
f82642e3 |
| 18-Oct-2008 |
Wolfgang Denk <wd@denx.de> |
Merge 'next' branch
Conflicts:
board/freescale/mpc8536ds/mpc8536ds.c
include/configs/mgcoge.h
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
Revision tags: v2008.10 |
|
| #
6d0f6bcf |
| 16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
Revision tags: v2008.10-rc3, v2008.10-rc2, v2008.10-rc1 |
|
| #
36c2d306 |
| 15-Aug-2008 |
Steven A. Falco <sfalco@harris.com> |
Add a hook to allow board-specific PIO mode setting.
This patch adds a hook whereby a board-specific routine can be called to
configure hardware for a PIO mode. The prototype for the board-specific
Add a hook to allow board-specific PIO mode setting.
This patch adds a hook whereby a board-specific routine can be called to
configure hardware for a PIO mode. The prototype for the board-specific
routine is:
int inline ide_set_piomode(int pio_mode)
ide_set_piomode should be prepared to configure hardware for a pio_mode
between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
Signed-off-by: Steven A. Falco <sfalco@harris.com>
show more ...
|
| #
9571b84c |
| 15-Aug-2008 |
Steven A. Falco <sfalco@harris.com> |
Replace enums in ata.h with an include of libata.h
This patch removes some enums from ata.h and replaces them with an
include of libata.h. This way, we eliminate duplicated code, and
prevent errors
Replace enums in ata.h with an include of libata.h
This patch removes some enums from ata.h and replaces them with an
include of libata.h. This way, we eliminate duplicated code, and
prevent errors whereby the different versions could be out of sync.
Signed-off-by: Steven A. Falco <sfalco@harris.com>
show more ...
|
|
Revision tags: v1.3.4, v1.3.4-rc2, v1.3.4-rc1, v1.3.3, v1.3.3-rc3, v1.3.3-rc2, v1.3.3-rc1, v1.3.2, v1.3.2-rc3, v1.3.2-rc2, v1.3.2-rc1, v1.3.1, v1.3.1-rc1, v1.3.0, v1.3.0-rc4, v1.3.0-rc3 |
|
| #
b8685aff |
| 22-Sep-2007 |
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
Merge git://www.denx.de/git/u-boot
Conflicts:
CREDITS
|
|
Revision tags: v1.3.0-rc2, v1.3.0-rc1 |
|
| #
d1bc6c8d |
| 13-Aug-2007 |
Ben Warren <bwarren@qstreams.com> |
Sync'd u-boot-net with mainline
Merge git://www.denx.de/git/u-boot
Conflicts:
drivers/bcm570x.c
drivers/tigon3.c
|
| #
375c2c9e |
| 13-Aug-2007 |
Haavard Skinnemoen <hskinnemoen@atmel.com> |
Merge commit 'upstream/master'
|
| #
78549bbf |
| 07-Aug-2007 |
Markus Klotzbuecher <mk@denx.de> |
Merge with git://www.denx.de/git/u-boot.git
|
| #
bc296248 |
| 13-Jul-2007 |
Michal Simek <monstr@monstr.eu> |
Merge git://www.denx.de/git/u-boot
|
| #
98c80b46 |
| 10-Jul-2007 |
John Rigby <jrigby@freescale.com> |
Merge branch 'master' into u-boot-5329-early
|
| #
0459e7d3 |
| 06-Jul-2007 |
Kim Phillips <kim.phillips@freescale.com> |
Merge git://www.denx.de/git/u-boot
|
| #
8e990cb0 |
| 04-Jul-2007 |
Stefan Roese <sr@denx.de> |
Merge with git://www.denx.de/git/u-boot.git
|