Merge branch 'master' of git://git.denx.de/u-boot-usb

usb: xhci-mem: Fix scratchpad array issue

After updating the value of dev_context_ptrs[0], we should flush this
from cache to memory. Otherwise the xhci controller won't use it.

Signed-off-by: Ye L

usb: xhci-mem: Fix scratchpad array issue

After updating the value of dev_context_ptrs[0], we should flush this
from cache to memory. Otherwise the xhci controller won't use it.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

- Introduce CONFIG_SPL_DM_USB

usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/

This allows to disable the USB driver model in SPL because it checks
the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for
regular non-SP

usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/

This allows to disable the USB driver model in SPL because it checks
the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for
regular non-SPL builds.

Signed-off-by: Sven Schwermer <sven@svenschwermer.de>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-usb

usb: xhci: Set 'Average TRB Length' to 8 for control endpoints

Update the codes to conform with xHCI spec chapter 6.2.3.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

usb: xhci: Don't assume LS/FS devices are always behind a HS hub

At present xHCI driver assumes LS/FS devices are attached directly
to a HS hub. If they are connected to a LS/FS hub, the driver will

usb: xhci: Don't assume LS/FS devices are always behind a HS hub

At present xHCI driver assumes LS/FS devices are attached directly
to a HS hub. If they are connected to a LS/FS hub, the driver will
fail to perform the USB enumeration process on such devices.

This is fixed by looking from the device itself all the way up to
the HS hub where the TT that serves the device is located.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge git://git.denx.de/u-boot-usb

usb: xhci: Enable TT to support LS/FS devices behind a HS hub

So far LS/FS devices directly attached to xHC root port can be
successfully enumerated by xHCI driver, but if they are connected
behind

usb: xhci: Enable TT to support LS/FS devices behind a HS hub

So far LS/FS devices directly attached to xHC root port can be
successfully enumerated by xHCI driver, but if they are connected
behind a hub, the enumeration process fails to address the device.

It turns out xHCI driver still misses a part that in the device's
input slot context, all Transaction Translator (TT) related fields
are not programmed. The xHCI spec defines how to enable TT.

Now LS/FS devices like USB keyboard/mouse can be enumerated behind
a high speed hub.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

usb: xhci: Program 'route string' in the input slot context

xHCI spec says: the values of the 'route string' field shall be
initialized by the first 'Address Device' command issued to a
device slot,

usb: xhci: Program 'route string' in the input slot context

xHCI spec says: the values of the 'route string' field shall be
initialized by the first 'Address Device' command issued to a
device slot, and shall not be modified by any other command.

So far U-Boot does not program this field, and it does not prevent
SS device directly attached to root port, or HS device behind an HS
hub, from working, due to the fact that 'route string' is used by
the xHC to target SS packets. But in order to enumerate devices
behind an SS hub, this field must be programmed.

With this commit and along with previous commits, now SS & HS devices
attached to a USB 3.0 hub can be enumerated by U-Boot.

As usual, this new feature is only available when DM is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

usb: xhci: Change xhci_setup_addressable_virt_dev() signature

For future extension, change xhci_setup_addressable_virt_dev()
signature to accept a pointer to 'struct usb_device', instead
of its memb

usb: xhci: Change xhci_setup_addressable_virt_dev() signature

For future extension, change xhci_setup_addressable_virt_dev()
signature to accept a pointer to 'struct usb_device', instead
of its members slot_id & speed, as the struct already contains
these two plus some other useful information of the device.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

usb: xhci: Initialize scratchpad buffer array and scratchpad buffers

The scratchpad buffer array is used to define the locations of
statically allocated memory pages that are available for the
priva

usb: xhci: Initialize scratchpad buffer array and scratchpad buffers

The scratchpad buffer array is used to define the locations of
statically allocated memory pages that are available for the
private use of the xHC. The xHCI spec explicitly mentions that
system software shall allocate the scratchpad buffers before
placing the xHC in to Run mode (Run/Stop (R/S) = ‘1’), however
U-Boot is missing this part.

This causes xHC on Intel platform does not respond the very first
'enable slot' command that is given to xHC and the 'enable slot'
command completion event TRB is never generated and xHC seems to
hang forever.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>

show more ...

treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>

Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>.
Replace all include directives for <asm-generic/errno.h> with

treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>

Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>.
Replace all include directives for <asm-generic/errno.h> with
<linux/errno.h>.

<asm-generic/...> is supposed to be included from <asm/...> when
arch-headers fall back into generic implementation. Generally, they
should not be directly included from .c files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Add drivers/usb/host/xhci-rockchip.c]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

dm: usb: Support driver model in XHCI

Add driver model support in the XHCI support code so that it can be used by
XHCI USB drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek

dm: usb: Support driver model in XHCI

Add driver model support in the XHCI support code so that it can be used by
XHCI USB drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

dm: usb: xhci: Use explicit parameters for xhci_setup_addressable_virt_dev()

This function should not be delving into struct usb_device. Pass in the
parameters it needs directly.

Signed-off-by: Sim

dm: usb: xhci: Use explicit parameters for xhci_setup_addressable_virt_dev()

This function should not be delving into struct usb_device. Pass in the
parameters it needs directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

dm: usb: xhci: Use explicit parameters for xhci_alloc_virt_device()

This function should not be delving into struct usb_device. Pass in the
parameters it needs directly.

Signed-off-by: Simon Glass

dm: usb: xhci: Use explicit parameters for xhci_alloc_virt_device()

This function should not be delving into struct usb_device. Pass in the
parameters it needs directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

usb: 64-bit architectures support for xHCI

This commit allows xHCI to use both 64 and 32 bit memory
physical addresses depending on architecture it's being built for.
Also it makes use of readq()/wr

usb: 64-bit architectures support for xHCI

This commit allows xHCI to use both 64 and 32 bit memory
physical addresses depending on architecture it's being built for.
Also it makes use of readq()/writeq() on 64-bit systems

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

USB: xHCI: Add stack support for xHCI

This adds stack layer for eXtensible Host Controller Interface
which facilitates use of USB 3.0 in host mode.

Adapting xHCI host controller driver in linux-ker

USB: xHCI: Add stack support for xHCI

This adds stack layer for eXtensible Host Controller Interface
which facilitates use of USB 3.0 in host mode.

Adapting xHCI host controller driver in linux-kernel
by Sarah Sharp to needs in u-boot.

Initial porting from Linux kernel version 3.4, with following
top commit history of drivers/usb/host/xhci* :
cf84055 xHCI: Cleanup isoc transfer ring when TD length mismatch found

This adds the basic xHCI host controller driver with bare minimum
features:
- Control/Bulk transfer support has been added with required
infrastructure for necessary xHC data structures.
- Stream protocol hasn't been supported yet.
- No support for quirky devices has been added.

Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Marek Vasut <marex@denx.de>

show more ...