|
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07 |
|
| #
dc7df68f |
| 21-Jun-2018 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-sh
|
| #
701db6e9 |
| 17-Jun-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Support reset GPIO both in mac and phy node
The recent DTs have the PHY reset GPIO in the PHY node rather than
the ethernet MAC node, support extracting the PHY reset GPIO info
from both
net: ravb: Support reset GPIO both in mac and phy node
The recent DTs have the PHY reset GPIO in the PHY node rather than
the ethernet MAC node, support extracting the PHY reset GPIO info
from both the PHY node and ethernet MAC node.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
| #
536fb5d4 |
| 17-Jun-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Filter out supported PHY features
The RAVB only supports 100Full and 1000Full operation, it does not support
10Full or any Half-duplex modes. The PHY could still advertise those features
net: ravb: Filter out supported PHY features
The RAVB only supports 100Full and 1000Full operation, it does not support
10Full or any Half-duplex modes. The PHY could still advertise those features
though, so filter out the PHY features accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
| #
c4a8d9ca |
| 18-Jun-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Do not shut down clock in start callback
Do not stop the clock in the start callback in case of failure, keep
them running to also keep the PHY running. The failure could be ie.
PHY faili
net: ravb: Do not shut down clock in start callback
Do not stop the clock in the start callback in case of failure, keep
them running to also keep the PHY running. The failure could be ie.
PHY failing to negotiate link and if the clock get shut down, another
attempt at bringing the link up would fail. The clock right now are
started in probe function and stopped in remove function, which is
the correct behavior.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
| #
040b2583 |
| 01-Jun-2018 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-sh
|
| #
34f1dba9 |
| 26-Apr-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Add R8A77990 E3 compatible
Add new compatible to the Ethernet AVB driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershber
net: ravb: Add R8A77990 E3 compatible
Add new compatible to the Ethernet AVB driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|
| #
83d290c5 |
| 06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
|
Revision tags: v2018.03 |
|
| #
81f077f4 |
| 05-Mar-2018 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-sh
|
| #
7a7081e6 |
| 26-Feb-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Add R8A77965 M3N entries
Add entries for the R8A77965 M3N SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger
net: ravb: Add R8A77965 M3N entries
Add entries for the R8A77965 M3N SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
| #
bd650cd4 |
| 16-Feb-2018 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-sh
|
| #
d64c7894 |
| 13-Feb-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Initialize PHY in probe() once
Reset and initialize the PHY once in the probe() function rather than
doing it over and over again is start() function. This requires us to
keep the clock e
net: ravb: Initialize PHY in probe() once
Reset and initialize the PHY once in the probe() function rather than
doing it over and over again is start() function. This requires us to
keep the clock enabled while the driver is in use. This significantly
reduces the time between transfers as the PHY doesn't have to restart
autonegotiation between transfers, which takes forever.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
| #
9c486e7c |
| 27-Jan-2018 |
Tom Rini <trini@konsulko.com> |
Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh
|
| #
e3105eac |
| 19-Jan-2018 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: staticize ravb_start
Cosmetic fix, make ravb_start() static.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <
net: ravb: staticize ravb_start
Cosmetic fix, make ravb_start() static.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
| #
1d12a7c8 |
| 26-Jan-2018 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-spi
|
| #
48263504 |
| 23-Jan-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <dan
wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
show more ...
|
|
Revision tags: v2018.01 |
|
| #
fd124556 |
| 13-Dec-2017 |
Tom Rini <trini@konsulko.com> |
Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh
|
|
Revision tags: v2017.11 |
|
| #
9e4a6373 |
| 21-Oct-2017 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Add R8A77995 D3 compatible
Add new compatible to the Ethernet AVB driver for R8A77995 D3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershber
net: ravb: Add R8A77995 D3 compatible
Add new compatible to the Ethernet AVB driver for R8A77995 D3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|
| #
dc3bb3d4 |
| 21-Oct-2017 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Add R8A77970 V3M compatible
Add new compatible to the Ethernet AVB driver for R8A77970 V3M SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershb
net: ravb: Add R8A77970 V3M compatible
Add new compatible to the Ethernet AVB driver for R8A77970 V3M SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|
| #
9804d886 |
| 30-Nov-2017 |
Tom Rini <trini@konsulko.com> |
Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh
|
| #
90997cda |
| 09-Nov-2017 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
net: ravb: Fix reset GPIO handling
Fix handling of the reset GPIO. Drop the _nodev() suffix from the
gpio_request_by_name() call as there is now a proper DM capable
GPIO driver. Also check if the GP
net: ravb: Fix reset GPIO handling
Fix handling of the reset GPIO. Drop the _nodev() suffix from the
gpio_request_by_name() call as there is now a proper DM capable
GPIO driver. Also check if the GPIO is valid before freeing it in
remove path, otherwise U-Boot will crash.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|
| #
2ee87b0c |
| 10-Oct-2017 |
Tom Rini <trini@konsulko.com> |
Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
|
| #
bddb44e9 |
| 15-Sep-2017 |
Marek Vasut <marek.vasut@gmail.com> |
net: ravb: Add PHY reset GPIO support
Add support for obtaining PHY reset GPIO from DT and toggling it
before configuring the PHY to put the PHY into defined state.
Signed-off-by: Marek Vasut <mare
net: ravb: Add PHY reset GPIO support
Add support for obtaining PHY reset GPIO from DT and toggling it
before configuring the PHY to put the PHY into defined state.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|
| #
a89302cc |
| 02-Aug-2017 |
Tom Rini <trini@konsulko.com> |
Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
|
| #
1fea9e25 |
| 21-Jul-2017 |
Marek Vasut <marek.vasut@gmail.com> |
net: ravb: Add clock handling support
Add support for enabling and disabling the clock using the clock
framework based on the content of OF instead of doing it manually
in the board file.
Signed-of
net: ravb: Add clock handling support
Add support for enabling and disabling the clock using the clock
framework based on the content of OF instead of doing it manually
in the board file.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|
| #
e821a7bd |
| 21-Jul-2017 |
Marek Vasut <marek.vasut@gmail.com> |
net: ravb: Detect PHY correctly
The order of parameters passed to the phy_connect() was wrong.
Moreover, only PHY address 0 was used. Replace this with code
capable of detecting the PHY address.
Si
net: ravb: Detect PHY correctly
The order of parameters passed to the phy_connect() was wrong.
Moreover, only PHY address 0 was used. Replace this with code
capable of detecting the PHY address.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
show more ...
|