Merge branch pull request #13 into aspeed-dev-v2019.04

Change-Id: I642bbbb0700c982119137d7cdae034635f9dc3d2

phy: Only create NCSI PHY when it's present

phy_connect would unconditionally create a NCSI PHY device if the driver
was configured.

By detecting what the phy type is at runtime we can support NCSI

phy: Only create NCSI PHY when it's present

phy_connect would unconditionally create a NCSI PHY device if the driver
was configured.

By detecting what the phy type is at runtime we can support NCSI and
non-NCSI system with the same defconfig,

Link: https://lore.kernel.org/r/20220610080059.2333501-3-joel@jms.id.au
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

net: phy: ncsi: Add phy_interface_is_ncsi() helper

and use it to avoid configuring NCSI in net_loop() when the DT has no
support for it.

Link: https://lore.kernel.org/r/20220610080059.2333501-2-joe

net: phy: ncsi: Add phy_interface_is_ncsi() helper

and use it to avoid configuring NCSI in net_loop() when the DT has no
support for it.

Link: https://lore.kernel.org/r/20220610080059.2333501-2-joel@jms.id.au
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

Merge branch 'aspeed-dev-v2019.04' into aspeed-master-v2019.04

Merge branch 'feature/rmii' into aspeed-dev-v2019.04

apply ncsi patch

net: phy: implement fallback mechanism for negative phy adresses

Negative phy-addresses can occour if the caller function was not able to
determine a valid phy address (from device-tree for example)

net: phy: implement fallback mechanism for negative phy adresses

Negative phy-addresses can occour if the caller function was not able to
determine a valid phy address (from device-tree for example). In this
case we catch this here and search for ANY phy device on the given mdio-
bus.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Lukasz Majewski <lukma@denx.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: phy: Add clause 45 identifier to phy_device

The phy devices can be accessed via clause 22 or via clause 45.
This information can be deduced when we read phy id. if the phy id
is read without gi

net: phy: Add clause 45 identifier to phy_device

The phy devices can be accessed via clause 22 or via clause 45.
This information can be deduced when we read phy id. if the phy id
is read without giving any MDIO Manageable Device Address (MMD), then
it conforms to clause 22. otherwise it conforms to clause 45.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge tag 'xilinx-for-v2019.04' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2019.04

tools:
- Fix zynqmpimage generation

zynq:
- Some configs/Kconfig/DT updates
- Enable REMAKE_ELF a

Merge tag 'xilinx-for-v2019.04' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2019.04

tools:
- Fix zynqmpimage generation

zynq:
- Some configs/Kconfig/DT updates
- Enable REMAKE_ELF and OF_SEPARATE
- Topic boards update
- i2c cleanups and conversion to DM_I2C

zynqmp:
- Some configs/Kconfig/DT updates
- Board config cleanup
- Move arch folder to mach-zynqmp

versal:
- Enable DM_I2C, CMD_DM

zynq-gem:
- Fix driver cache handling

i2c:
- Live tree simple update

phy:
- Fixed phy cleanup

travis:
- Wire Versal SoC

show more ...

net: phy: Move fixed link code to separate routine

This patch moves fixed-link functionality code to a separate
routine inorder to make it more modular and cleaner.

Signed-off-by: Siva Durga Prasad

net: phy: Move fixed link code to separate routine

This patch moves fixed-link functionality code to a separate
routine inorder to make it more modular and cleaner.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch '2018-12-26-master-imports'

- Misc TI platform fixes
- mt7629 fix for Linux compatible SMP support
- Other small regression fixes

phy: Fix u-boot coruption when fixed-phy is used

When fixed-link phy is used subnode offset is used as phy address. This
number is bigger then space allocated for bus structure (allocated via
mdio_a

phy: Fix u-boot coruption when fixed-phy is used

When fixed-link phy is used subnode offset is used as phy address. This
number is bigger then space allocated for bus structure (allocated via
mdio_alloc).
bus->phymap[] array has PHY_MAX_ADDR size (32).
That's why writing bus->phymap[addr] where addr is < 0 or > PHY_MAX_ADDR
is causing write to memory which can caused full U-Boot crash.

The patch is checking if address is in correct range.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: phy: add ofnode node to struct phy_device

Now the UCLASS_ETH device "node" field is owerwritten by some network drivers in
case of Ethernet PHYs which are linked to UCLASS_ETH device using
"phy

net: phy: add ofnode node to struct phy_device

Now the UCLASS_ETH device "node" field is owerwritten by some network drivers in
case of Ethernet PHYs which are linked to UCLASS_ETH device using
"phy-handle" DT property and when Ethernet PHY driver needs to read some
additional information from DT. In such cases following happens (in
general):

- network drivers
priv->phydev = phy_connect(priv->bus, priv->phyaddr, dev,
priv->interface);
<-- phydev is connected to dev which is UCLASS_ETH device

if (priv->phy_of_handle > 0)
dev_set_of_offset(priv->phydev->dev, priv->phy_of_handle);
<-- phydev->dev->node is overwritten by phy-handle DT node

- PHY driver in .config() callback
int node = dev_of_offset(dev);
<-- PHY driver uses overwritten dev->node
const void *fdt = gd->fdt_blob;

if (fdtdec_get_bool(fdt, node, "property"))
...

As result, UCLASS_ETH device can't be used any more for DT accessing.

This patch adds additional ofnode node field to struct phy_device which can
be set explicitly by network drivers and used by PHY drivers, so
overwriting can be avoided. Also add helper function phy_get_ofnode()
which will check and return phy_device->node or dev_ofnode(phydev->dev) for
backward compatibility with existing drivers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: phy: Clean up includes of common.h

We want to be able to include some other system headers in phy.h but
that requires us to have included common.h in the top-level first.

Also, common.h includ

net: phy: Clean up includes of common.h

We want to be able to include some other system headers in phy.h but
that requires us to have included common.h in the top-level first.

Also, common.h includes config.h as the first thing it does, so don't
include it directly.

Series-to: u-boot
Series-cc: Grygorii Strashko <grygorii.strashko@ti.com>
Seried-cc: ti
Series-process-log: sort, uniq
Cover-letter:
Prepare for net: phy: prevent uclass_eth device "node" field overwriting
Prepare for [1] so that it doesn't break the build for a bunch of
boards. There are a number of reasons this series broke the build
but none of them depend on changes in the series, so fix up those
situations ahead of applying that series.

[1] https://patchwork.ozlabs.org/cover/940104/
END
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-net

phy: Fix style violations

Fix some style violations in the generic PHY management code.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Mario Six <mario.six@gdsys.cc>

Merge git://git.denx.de/u-boot-net

net: phy: Add Broadcom BCM53xx switch driver

Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of

net: phy: Add Broadcom BCM53xx switch driver

Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of the switch hardware such that each user visible port
(configurable) and the CPU port can forward packets between each other
while preserving isolation with other ports.

This is useful for e.g: the Lamobo R1 board featuring a Broadcom
BCM53125 switch.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

net: phy: Add Amlogic Meson GXL Internal PHY support

The Amlogic Meson GXL/GXM families embeds an internal RMII Ethernet PHY.

The PHY acts as a generic PHY but needs a slight configuration right
be

net: phy: Add Amlogic Meson GXL Internal PHY support

The Amlogic Meson GXL/GXM families embeds an internal RMII Ethernet PHY.

The PHY acts as a generic PHY but needs a slight configuration right
before it's configuration.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers

The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so

net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers

The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so
the solution was to use #ifdefs to select between the two drivers.

As a result KSZ9031, which has a unique ID, is now caught in the
crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031
will not function properly, as some essential configuration code is
ifdef'd-out.

To prevent such situations, move the KSZ9000 drivers to a separate
file, and place them under a separate Kconfig option. While it is
possible to enable both KSZ8000 and KSZ9000 drivers at the same time,
the assumption is that it is highly unlikely for a system to contain
both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers
will be enabled at any given time.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

dm: core: Replace of_offset with accessor (part 2)

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
devi

dm: core: Replace of_offset with accessor (part 2)

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...