Merge branch 'master' of git://git.denx.de/u-boot-net

net: mvneta: Add GPIO configuration support

This patch add GPIO configuration support in mvneta driver.
Driver will handle PHY reset. GPIO pins should be set in device tree.

Ported from mvpp2x
[htt

net: mvneta: Add GPIO configuration support

This patch add GPIO configuration support in mvneta driver.
Driver will handle PHY reset. GPIO pins should be set in device tree.

Ported from mvpp2x
[https://patchwork.ozlabs.org/patch/799654/]

Initial discussion to port the changes into mvneta
[https://patchwork.ozlabs.org/patch/1005765/]

Signed-off-by: Aditya Prayoga <aditya@kobol.io>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

linux/compat.h: Add netdev_### log macros

Currently there are two ethernet drivers (mvneta.c and mvpp2.c) that
has netdev_### (eg: netdev_dbg) log macros defined in its own driver
file. This adds th

linux/compat.h: Add netdev_### log macros

Currently there are two ethernet drivers (mvneta.c and mvpp2.c) that
has netdev_### (eg: netdev_dbg) log macros defined in its own driver
file. This adds these log macros in a common place linux/compat.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

net: mvneta: zero Tx descriptors on init

Make the initialization sequence consistent with the Linux kernel
driver.

Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@

net: mvneta: zero Tx descriptors on init

Make the initialization sequence consistent with the Linux kernel
driver.

Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>

show more ...

net: mvneta: dcache flush TX descriptors at init

This fixes sporadic timeout on initial packet Tx (usually ARP), with an
error message like:

timeout: packet not sent

Reviewed-by: Stefan Roese <s

net: mvneta: dcache flush TX descriptors at init

This fixes sporadic timeout on initial packet Tx (usually ARP), with an
error message like:

timeout: packet not sent

Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

mvebu: neta: align DMA buffers

This makes sure the DMA buffers are properly aligned for the
hardware.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-

mvebu: neta: align DMA buffers

This makes sure the DMA buffers are properly aligned for the
hardware.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge git://git.denx.de/u-boot-marvell

net: mvneta: Fix fault when wrong device tree

The driver does not check id phy_connect failed (for example on wrong
property name in device tree). In such a case a fault occurs and the
CPU is restar

net: mvneta: Fix fault when wrong device tree

The driver does not check id phy_connect failed (for example on wrong
property name in device tree). In such a case a fault occurs and the
CPU is restarted.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-net

net: mvneta: support setting hardware address

mvneta already supports setting the MAC address but this was only done
internally when some other part of U-Boot tries to actually use the
interface. Th

net: mvneta: support setting hardware address

mvneta already supports setting the MAC address but this was only done
internally when some other part of U-Boot tries to actually use the
interface. This commit exposes this functionality to the ethernet core
code so that the MAC addresses of all interfaces are configured
correctly even if they are not used before loading Linux.

Signed-off-by: Matt Pelland <mpelland@starry.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge git://git.denx.de/u-boot-net

net: mvneta - Fixed recv() when multiple packets have arrived.

This patch fixes a problem in the mvneta driver where if more than
one packet arrives between calls to mvneta_recv(), the additional
de

net: mvneta - Fixed recv() when multiple packets have arrived.

This patch fixes a problem in the mvneta driver where if more than
one packet arrives between calls to mvneta_recv(), the additional
descriptors will be marked as free even though only one descriptor
has been read and processed from the receive queue. This causes
the additional packet(s) to be delayed until the next packet arrives.
>From this point on all packets will be delayed because the receive
queue will contain unprocessed packets but the hardware shows no
busy descriptors.

Signed-off-by: Jason Brown <jason.brown@apcon.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge git://git.denx.de/u-boot-net

net: fix typos

%s/Desriptor/Descriptor/g

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

dm: core: Rename of_device_is_compatible()

The of_ prefix conflicts with the livetree version of this function.
Rename it to avoid problems when we add livetree support.

Signed-off-by: Simon Glass

dm: core: Rename of_device_is_compatible()

The of_ prefix conflicts with the livetree version of this function.
Rename it to avoid problems when we add livetree support.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing function

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

mvebu: neta: a37xx: Add fixed link support to neta driver

Add support for fixed link to NETA driver.
This feature requreed for proper support of SFP modules
and onboard connected devices like Ethern

mvebu: neta: a37xx: Add fixed link support to neta driver

Add support for fixed link to NETA driver.
This feature requreed for proper support of SFP modules
and onboard connected devices like Ethernet switches

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Terry Zhou <bjzhou@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

mvebu: neta: Add support for board init function

Add ability to use board-specific initialization flow
to NETA driver (for instance Ethernet switch bring-up)

Signed-off-by: Konstantin Porotchkin <k

mvebu: neta: Add support for board init function

Add ability to use board-specific initialization flow
to NETA driver (for instance Ethernet switch bring-up)

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

Merge git://www.denx.de/git/u-boot-marvell

This mainly adds support for some new boards, like the ARMv8 community
boards MACCHIATOBin and ESPRESSBin

mvebu: neta: a37xx: Add fixed link support to neta driver

Add support for fixed link to NETA driver.
This feature requreed for proper support of SFP modules
and onboard connected devices like Ethern

mvebu: neta: a37xx: Add fixed link support to neta driver

Add support for fixed link to NETA driver.
This feature requreed for proper support of SFP modules
and onboard connected devices like Ethernet switches

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Terry Zhou <bjzhou@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

mvebu: neta: Add support for board init function

Add ability to use board-specific initialization flow
to NETA driver (for instance Ethernet switch bring-up)

Signed-off-by: Konstantin Porotchkin <k

mvebu: neta: Add support for board init function

Add ability to use board-specific initialization flow
to NETA driver (for instance Ethernet switch bring-up)

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...