History log of /openbmc/u-boot/drivers/net/macb.h (Results 1 – 24 of 24)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07
# 83d290c5 06-May-2018 Tom Rini <trini@konsulko.com>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...


Revision tags: v2018.03
# fdb6c323 15-Jan-2018 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-net


Revision tags: v2018.01, v2017.11
# 4bf56913 22-Aug-2017 Wilson Lee <wilson.lee@ni.com>

net: macb: Add support for Xilinx Zynq SoC

Although Xilinx Zynq SoC was using MACB similar hardware. However,
U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is
to add support for

net: macb: Add support for Xilinx Zynq SoC

Although Xilinx Zynq SoC was using MACB similar hardware. However,
U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is
to add support for the Xilinx Zynq SoC to the existing MACB network
driver.

This patch is to add Zynq GEM DMA Config, provide callback
function for different linkspeed for case of using Xilinx Zynq
Programmable Logic as GMII to RGMII converter.

This patch convert the return value to use error codes.

Signed-off-by: Wilson Lee <wilson.lee@ni.com>
Cc: Chen Yee Chew <chen.yee.chew@ni.com>
Cc: Keng Soon Cheah <keng.soon.cheah@ni.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


Revision tags: v2016.07, openbmc-20160624-1, v2016.01-rc1, v2015.10, v2015.10-rc5, v2015.10-rc4, v2015.10-rc3, v2015.10-rc2
# fcd78fa6 12-Aug-2015 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-net


Revision tags: v2015.10-rc1, v2015.07, v2015.07-rc3, v2015.07-rc2
# ade4ea4d 03-Jun-2015 Wu, Josh <Josh.wu@atmel.com>

net: macb: add gmac multi-queue support

This patch refer to linux kernel commit: d8b763e1e79f
net/macb: add TX multiqueue support for gem
by: Cyrille Pitchen

1. macb driver will check the regis

net: macb: add gmac multi-queue support

This patch refer to linux kernel commit: d8b763e1e79f
net/macb: add TX multiqueue support for gem
by: Cyrille Pitchen

1. macb driver will check the register to find how many queues support for
this chip.

2. Then as we only use queue0 for tx, so we will set up all other queues
use a dummy descriptor, which USED bit is set. So those queues are not used.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


Revision tags: v2015.07-rc1, v2015.04, v2015.04-rc5, v2015.04-rc4, v2015.04-rc3, v2015.04-rc2, v2015.04-rc1, v2015.01, v2015.01-rc4, v2015.01-rc3, v2015.01-rc2, v2015.01-rc1, v2014.10, v2014.10-rc3, v2014.10-rc2, v2014.10-rc1, v2014.07, v2014.07-rc4, v2014.07-rc3, v2014.07-rc2, v2014.07-rc1, v2014.04, v2014.04-rc3, v2014.04-rc2, v2014.04-rc1, v2014.01, v2014.01-rc3, v2014.01-rc2, v2014.01-rc1
# 85b8c5c4 09-Nov-2013 Albert ARIBAUD <albert.u.boot@aribaud.net>

Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
board/compulab/cm_t35/Makefile
board/corscience/tricorder/Makefile
board/ppcag/bg0900/Makefi

Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
board/compulab/cm_t35/Makefile
board/corscience/tricorder/Makefile
board/ppcag/bg0900/Makefile
drivers/bootcount/Makefile
include/configs/omap4_common.h
include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

board/compulab/common/Makefile
board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

include/configs/am335x_igep0033.h
include/configs/omap3_igep00x0.h

show more ...


# c0e5dd88 05-Nov-2013 Albert ARIBAUD <albert.u.boot@aribaud.net>

Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'


Revision tags: v2013.10, v2013.10-rc4
# 32e4f6bf 18-Sep-2013 Bo Shen <voice.shen@atmel.com>

net: macb: get DMA bus width from design config register

Get DMA bus width from design config register

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@g

net: macb: get DMA bus width from design config register

Get DMA bus width from design config register

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

show more ...


Revision tags: v2013.10-rc3, v2013.10-rc2, v2013.10-rc1
# 326ea986 31-Jul-2013 Stefano Babic <sbabic@denx.de>

Merge git://git.denx.de/u-boot-arm

Conflicts:
board/freescale/mx6qsabrelite/Makefile
board/freescale/mx6qsabrelite/mx6qsabrelite.c
include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic <s

Merge git://git.denx.de/u-boot-arm

Conflicts:
board/freescale/mx6qsabrelite/Makefile
board/freescale/mx6qsabrelite/mx6qsabrelite.c
include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic <sbabic@denx.de>

show more ...


# 8b485ba1 25-Jul-2013 Albert ARIBAUD <albert.u.boot@aribaud.net>

Merge branch 'u-boot/master' into u-boot-arm/master


Revision tags: v2013.07, v2013.07-rc3
# 1a459660 08-Jul-2013 Wolfgang Denk <wd@denx.de>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>


Revision tags: v2013.07-rc2
# ca85eb8c 24-Jun-2013 Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-net


Revision tags: v2013.07-rc1
# d256be29 24-Apr-2013 Bo Shen <voice.shen@atmel.com>

net: macb: add support for gigabit MAC

Add gigabit MAC support in macb driver
- using IP version to distinguish whether MAC is GMAC

Signed-off-by: Bo Shen <voice.shen@atmel.com>


Revision tags: v2013.04, v2013.04-rc3, v2013.04-rc2, v2013.04-rc1, v2013.01.01, v2013.01, v2013.01-rc3, v2013.01-rc2, v2013.01-rc1, v2012.10, v2012.10-rc3, v2012.10-rc2, v2012.10-rc1, v2012.07, v2012.07-rc3, v2012.07-rc2, v2012.07-rc1, v2012.04.01, v2012.04, v2012.04-rc3, v2012.04-rc2, v2012.04-rc1, v2011.12, v2011.12-rc3, v2011.12-rc2, v2011.12-rc1, v2011.09, v2011.09-rc2, v2011.09-rc1, v2011.06, v2011.06-rc3, v2011.06-rc2, v2011.06-rc1, v2011.03, v2011.03-rc2, v2011.03-rc1, v2010.12, v2010.12-rc3, v2010.12-rc2, v2010.12-rc1, v2010.09, v2010.09-rc2, v2010.09-rc1, v2010.06, v2010.06-rc3, v2010.06-rc2, v2010.06-rc1, v2010.03, v2010.03-rc3, v2010.03-rc2, v2010.03-rc1, v2009.11.1, v2009.11, v2009.11-rc2, v2009.11-rc1, v2009.08, v2009.08-rc3, v2009.08-rc2, v2009.08-rc1, v2009.06, v2009.06-rc3, v2009.06-rc2, v2009.06-rc1, v2009.03, v2009.03-rc2, v2009.03-rc1, v2009.01, v2009.01-rc3, v2009.01-rc2, v2009.01-rc1, v2008.10, v2008.10-rc3, v2008.10-rc2, v2008.10-rc1, v1.3.4, v1.3.4-rc2, v1.3.4-rc1, v1.3.3, v1.3.3-rc3, v1.3.3-rc2, v1.3.3-rc1, v1.3.2, v1.3.2-rc3, v1.3.2-rc2
# 20c93959 21-Feb-2008 Marian Balakowicz <m8@semihalf.com>

Merge branch 'master' of /home/git/u-boot


# 5db61385 15-Feb-2008 Wolfgang Denk <wd@denx.de>

Merge branch 'master' of git://www.denx.de/git/u-boot-arm


# ae92069a 15-Feb-2008 Peter Pearse <peter.pearse@arm.com>

Merge branch '080116_at91cap9' of git://linux-arm.org/u-boot-armdev


Revision tags: v1.3.2-rc1
# 7263ef19 03-Jan-2008 Stelian Pop <stelian at>

AT91CAP9 support : MACB changes

Signed-off-by: Stelian Pop <stelian <at> popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>


# 6a40ef62 09-Jan-2008 Markus Klotzbuecher <mk@denx.de>

Merge git://www.denx.de/git/u-boot

Conflicts:

board/tqm5200/tqm5200.c


# 4985ca5a 07-Jan-2008 Peter Pearse <peter.pearse@arm.com>

Merge with git://www.denx.de/git/u-boot.git


# 9caeaadf 11-Dec-2007 Stefan Roese <sr@denx.de>

Merge commit 'u-boot/master' into for-1.3.1

Conflicts:

drivers/rtc/Makefile


# f743931f 06-Dec-2007 Jon Loeliger <jdl@freescale.com>

Merge commit 'wd/master'


# 521dcd30 06-Dec-2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Merge git://www.denx.de/git/u-boot

Conflicts:

drivers/Makefile


Revision tags: v1.3.1, v1.3.1-rc1
# fe08fb65 26-Nov-2007 Wolfgang Denk <wd@denx.de>

Merge commit '87ddedd'


# 2439e4bf 21-Nov-2007 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

drivers/net : move net drivers to drivers/net

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>