Merge branch 'boot/emmc' into aspeed-dev-v2019.04

mmc: SD: Add property for timing phase and drive type

Config appropriate timing phase and drive type during
probe or attach eMMC/SD.

Merge branch 'aspeed-dev-v2019.04' into aspeed-master-v2019.04

Merge branch 'ryan_port' into aspeed-dev-v2019.04

add 8bit support

Merge tag 'xilinx-for-v2018.07-rc2' of git://git.denx.de/u-boot-microblaze

Xilinx fixes for v2018.07-rc2

Zynq:
- Fix missing watchdog header
- DT fixes

ZynqMP:
- emmc configuration split
- Enable

Merge tag 'xilinx-for-v2018.07-rc2' of git://git.denx.de/u-boot-microblaze

Xilinx fixes for v2018.07-rc2

Zynq:
- Fix missing watchdog header
- DT fixes

ZynqMP:
- emmc configuration split
- Enable SPD
- Fix PMUFW_INIT_FILE logic
- Coverity fixes in SoC code

timer
- Add timer_get_boot_us

mmc:
- Fix MMC HS200 tuning command

serial:
- Fix scrabled chars with OF_LIVE

show more ...

mmc: sdhci: Fix MMC HS200 tuning command failures

This patch fixes the mmc tuning command failures
when tuning pattern data needs to read back for
comparision against the expected bit pattern.

Repo

mmc: sdhci: Fix MMC HS200 tuning command failures

This patch fixes the mmc tuning command failures
when tuning pattern data needs to read back for
comparision against the expected bit pattern.

Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
-

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes

xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9

fpga:
- Add secure bitstream loading support

mmc:
- Add hs200 mode support

usb xhci:
- Header fix

show more ...

mmc: sdhci: Update sdhci_send_command() to handle HS200

This patch updates sdhci_send_command() to handle MMC
HS200 tuning command.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xi

mmc: sdhci: Update sdhci_send_command() to handle HS200

This patch updates sdhci_send_command() to handle MMC
HS200 tuning command.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: sdhci: Check that ops are defined

The check is necessary to avoid NULL pointer dereference.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.co

mmc: sdhci: Check that ops are defined

The check is necessary to avoid NULL pointer dereference.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07

microblaze:
- Align defconfig

zynq:
- Rework fpga initialization and cpuinfo handling

zynqmp

Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07

microblaze:
- Align defconfig

zynq:
- Rework fpga initialization and cpuinfo handling

zynqmp:
- Add ZynqMP R5 support
- Wire and enable watchdog on zcu100-revC
- Setup MMU map for DDR at run time
- Show board info based on DT and cleanup IDENT_STRING

zynqmp tools:
- Add read partition support
- Add initial support for Xilinx bif format for boot.bin generation

mmc:
- Fix get_timer usage on 64bit cpus
- Add support for SD3.0 UHS mode

nand-zynq:
- Add support for 16bit buswidth
- Use address cycles from onfi params

scsi:
- convert ceva sata to UCLASS_AHCI

timer:
- Add Cadence TTC for ZynqMP r5

watchdog:
- Minor cadence driver cleanup

show more ...

mmc: sdhci: Read capabilities register1 and update host caps

This patch reads the capabilities register1 and update the host
caps accordingly for mmc layer usage. This patch mainly reads
for UHS cap

mmc: sdhci: Read capabilities register1 and update host caps

This patch reads the capabilities register1 and update the host
caps accordingly for mmc layer usage. This patch mainly reads
for UHS capabilities inorder to support SD3.0.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: sdhci: Invoke platform specific tuning and delay routines

This patch adds support to invoke any platform specific tuning
and delay routines if available.

Signed-off-by: Siva Durga Prasad Palad

mmc: sdhci: Invoke platform specific tuning and delay routines

This patch adds support to invoke any platform specific tuning
and delay routines if available.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: sdhci: Handle execute tuning command in sdhci_send_command

This patch upadted sdhci_send_command to handle execute tuning
command.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com

mmc: sdhci: Handle execute tuning command in sdhci_send_command

This patch upadted sdhci_send_command to handle execute tuning
command.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: sdhci: Add support for disabling clock

This patch adds support to disable clock if clk_disable
was set and then enable or set clock if the clock was changed
or clock was disabled when clock nee

mmc: sdhci: Add support for disabling clock

This patch adds support to disable clock if clk_disable
was set and then enable or set clock if the clock was changed
or clock was disabled when clock needs to be enabled.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: Changed the datatype of the variable to handle 64-bit arch

This patch changed the datatype of variable "start" from uint to ulong
to work properly on 64-bit machines as well. Also the return ty

mmc: Changed the datatype of the variable to handle 64-bit arch

This patch changed the datatype of variable "start" from uint to ulong
to work properly on 64-bit machines as well. Also the return type of
get_timer() function is ulong.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-mmc

mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE

Some IP-core implementations of the SDHCI have different troubles on the
silicon where they are placed.

On ZYNQ platform for example Xilinx doesn't acc

mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE

Some IP-core implementations of the SDHCI have different troubles on the
silicon where they are placed.

On ZYNQ platform for example Xilinx doesn't accept the hold timing of an
eMMC chip which operates in High-Speed mode and must be forced to
operate in non high-speed mode. To get rid of this
"SDHCI_QUIRK_BROKEN_HISPD_MODE" is introduced.

For more details about this refer to the Xilinx answer-recor #59999
https://www.xilinx.com/support/answers/59999.html

This commit:
- doesn't set HISPD bit on the host-conroller
- reflects this fact within the host-controller capabilities

Upon this the layer above (mmc-driver) can setup the card correctly.

Otherwise the MMC card will be switched into high-speed mode and causes
possible timing violation on the host-controller side.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

show more ...

Merge git://git.denx.de/u-boot-mmc

mmc: sdhci: change data transfer failure into debug message

During the tuning, drivers repeat data transfer, changing timing
parameters in the controller hardware. So, the tuning commands
(CMD19 fo

mmc: sdhci: change data transfer failure into debug message

During the tuning, drivers repeat data transfer, changing timing
parameters in the controller hardware. So, the tuning commands
(CMD19 for SD, CMD21 for eMMC) fail, and this is not a problem
at all.

Showing "Error detected..." in normal operation just make users
upset. This should not be shown.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()

This line overwrites host_cap that has been set by drivers and/or
helpers like mmc_of_parse(). Accumulate capabilities flags.

Signed-off

mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()

This line overwrites host_cap that has been set by drivers and/or
helpers like mmc_of_parse(). Accumulate capabilities flags.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge git://git.denx.de/u-boot-mmc

mmc: sdhci: do not compare pointer to 0

data is defined as struct mmc_data *data.
So it should not be compared to 0.

Problem identified with Coccinelle.

Signed-off-by: Heinrich Schuchardt <xypron.

mmc: sdhci: do not compare pointer to 0

data is defined as struct mmc_data *data.
So it should not be compared to 0.

Problem identified with Coccinelle.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT

Fixes emmc initialization regression on the db410c platform.

Clearing this register while SDHCI_PRESENT_STATE reports
SDHCI_CMD_

mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT

Fixes emmc initialization regression on the db410c platform.

Clearing this register while SDHCI_PRESENT_STATE reports
SDHCI_CMD_INHIBIT leads to undefined behaviour on the db410c.

When commit 7dde50 was merged (mmc: sdhci: Wait for SDHCI_INT_DATA_END
when transferring), SDHCI transfers transitioned to wait for bit
SDHCI_INT_DATA_END before flagging transfers done.

Without this patch, the db410 platform fails to initialize its eMMC
due to all of its transfers timing out (SDHCI_INT_DATA_END is never
raised after all the blocks have been transferred).

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

show more ...