Merge branch 'master' of git://git.denx.de/u-boot-socfpga

- Misc Gen5 fixes
- stratix10 bugfix
- dwmmc bugfix

mmc: dwmmc: Poll for iDMAC TX/RX interrupt

Poll for iDMAC TX/RX interrupt before disable DMA.
This to prevent disable DMA before data is transfer
completed.

Signed-off-by: Ley Foon Tan <ley.foon.ta

mmc: dwmmc: Poll for iDMAC TX/RX interrupt

Poll for iDMAC TX/RX interrupt before disable DMA.
This to prevent disable DMA before data is transfer
completed.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

show more ...

mmc: dw_mmc: Add RCRC handling

This patch adds check for command response CRC failure. The driver
is currently ignoring CRC check failure on command resposes which
have CRC atteched to it, which can

mmc: dw_mmc: Add RCRC handling

This patch adds check for command response CRC failure. The driver
is currently ignoring CRC check failure on command resposes which
have CRC atteched to it, which can be potentially dangerous. Even
more grueling problem happens when the command response is followed
by data transfer though, as in that case, the dwmci_data_transfer()
function will spin until it reaches the 240s timeout.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge tag 'rockchip-for-v2018.11' of git://git.denx.de/u-boot-rockchip

Rockchip changes for 2018.11

mmc: dw_mmc: check fifo status with a timeout in fifo mode

While trying to enable the dw_mmc on rk3188 I managed to confuse
and hang the dw_mmc controller into not delivering further data.
The fifo

mmc: dw_mmc: check fifo status with a timeout in fifo mode

While trying to enable the dw_mmc on rk3188 I managed to confuse
and hang the dw_mmc controller into not delivering further data.
The fifo state never became ready and the driver was iterating in
the while loop reading 0-byte packets forever.

So inspired by how other implementations handle this, check the fifo-
state beforhand and add a timeout to catch any glaring fifo issues
without hanging uboot altogether.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

dm: mmc: Drop CONFIG_DM_MMC_OPS

All boards which use DM_MMC have now been converted to use DM_MMC_OPS.
Drop the option and good riddance.

Signed-off-by: Simon Glass <sjg@chromium.org>

mmc: change the set_ios return type from void to int

To maintain consistency, set_ios type of legacy mmc_ops changed to int.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

Merge branch 'master' of http://git.denx.de/u-boot-mmc

mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg

Some arguments don't need to pass to dwmci_setup_cfg.
They are already included in dwmci_host structure.

Signed-off-by: Jaehoon Chu

mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg

Some arguments don't need to pass to dwmci_setup_cfg.
They are already included in dwmci_host structure.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of http://git.denx.de/u-boot-mmc

mmc: dw_mmc: push/pop all FIFO data if any data request

When DTO interrupt occurred, there are any remaining data still in FIFO
due to RX FIFO threshold is larger than remaining data. It also
causes

mmc: dw_mmc: push/pop all FIFO data if any data request

When DTO interrupt occurred, there are any remaining data still in FIFO
due to RX FIFO threshold is larger than remaining data. It also
causes that dwmmc didn't trigger RXDR interrupt, so is TX.

It's responsibility of driver to read remaining bytes on seeing DTO
interrupt.

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

mmc: dw_mmc: fix data starvation by host timeout under FIFO mode

This patch fixes data starvation by host timeout(HTO) error interrupt
which occurred under FIFO mode transfer on rk3036 board.

The f

mmc: dw_mmc: fix data starvation by host timeout under FIFO mode

This patch fixes data starvation by host timeout(HTO) error interrupt
which occurred under FIFO mode transfer on rk3036 board.

The former implement, the actual bytes were transmitted may be less than
should be. The size will still subtract value of len in case of there is
no receive/transmit FIFO data request interrupt.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

mmc: dw_mmc: transfer proper bytes to FIFO

The former implement, dw_mmc will push and pop the redundant data to
FIFO, we should transfer it according to the real size.

Signed-off-by: Ziyuan Xu <xzy

mmc: dw_mmc: transfer proper bytes to FIFO

The former implement, dw_mmc will push and pop the redundant data to
FIFO, we should transfer it according to the real size.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

mmc: use the generic error number

Use the generic error number instead of specific error number.
If use the generic error number, it can debug more easier.

Signed-off-by: Jaehoon Chung <jh80.chung@

mmc: use the generic error number

Use the generic error number instead of specific error number.
If use the generic error number, it can debug more easier.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>

show more ...

mmc: dw_mmc: remove the duplicated header file

<asm-generic/errno.h> is already included in <errno.h>.
It can use <errno.h> instead of <asm-generic/errno.h>

Signed-off-by: Jaehoon Chung <jh80.chung

mmc: dw_mmc: remove the duplicated header file

<asm-generic/errno.h> is already included in <errno.h>.
It can use <errno.h> instead of <asm-generic/errno.h>

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-dm

mmc: dw_mmc: reduce timeout detection cycle

It's no need to speed 10 seconds to wait the mmc device out from busy
status. 500 milliseconds enough.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
R

mmc: dw_mmc: reduce timeout detection cycle

It's no need to speed 10 seconds to wait the mmc device out from busy
status. 500 milliseconds enough.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

dm: mmc: dwmmc: use the callback functions as static

There are no places to call these functions.
It should be used the callback function.
Then it can be used as static functions.

Signed-off-by: Ja

dm: mmc: dwmmc: use the callback functions as static

There are no places to call these functions.
It should be used the callback function.
Then it can be used as static functions.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

dm: mmc: dwmmc: Support CONFIG_DM_MMC_OPS

Add support to dwmmc for using driver model for MMC operations.

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot-samsung

mmc: dw_mmc: fix the wrong AND operation

These condition checking are wrong.
Original Author's intention might be "&" instead of "&&".
It can know whether receive or transmit data request with
BIT[4

mmc: dw_mmc: fix the wrong AND operation

These condition checking are wrong.
Original Author's intention might be "&" instead of "&&".
It can know whether receive or transmit data request with
BIT[4]/BIT[5] of RINTSTS register.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>