SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

i2c: uniphier-f: replace debug() with dev_dbg()

Use dev_dbg() functions. It will be helpful to prefix log messages
with the corresponding device name when the core framework is ready.

While I am h

i2c: uniphier-f: replace debug() with dev_dbg()

Use dev_dbg() functions. It will be helpful to prefix log messages
with the corresponding device name when the core framework is ready.

While I am here, I renamed "dev", which was actually private data,
into "priv" because dev->dev looks confusing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing function

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: Use dm.h header when driver mode is used

This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

S

dm: Use dm.h header when driver mode is used

This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-uniphier

- Fix clk driver
- Optimize DRAM init code for LD20 SoC
- Get DRAM information from more reliable source
- Clean up SoC init code

Merge branch 'master' of git://git.denx.de/u-boot-uniphier

- Fix clk driver
- Optimize DRAM init code for LD20 SoC
- Get DRAM information from more reliable source
- Clean up SoC init code
- Allow to use Image.gz for booting ARM64 Linux
- Tidy up environments to use with ATF
- Clean up I2C drivers

show more ...

i2c: uniphier-f: use readl_poll_timeout() to poll registers

The readl_poll_timeout() is a useful helper to poll registers
and error out if the condition is not met.

Signed-off-by: Masahiro Yamada <

i2c: uniphier-f: use readl_poll_timeout() to poll registers

The readl_poll_timeout() is a useful helper to poll registers
and error out if the condition is not met.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

i2c: uniphier(-f): remove unneeded #include <dm/root.h>

This include is unnecessary for low-level drivers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

treewide: replace #include <asm/errno.h> with <linux/errno.h>

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap <asm-generic/errno.h>)

Replace

treewide: replace #include <asm/errno.h> with <linux/errno.h>

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()

This does not have much impact on behavior, but makes code look more
more like Linux. The use of devm_ioremap() often helps to delete
.re

ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()

This does not have much impact on behavior, but makes code look more
more like Linux. The use of devm_ioremap() often helps to delete
.remove callbacks entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

i2c: uniphier: use devm_get_addr() to get base address

Currently, fdtdec_get_addr_size() does not support the address
translation, so it cannot handle device trees with non-straight
"ranges" propert

i2c: uniphier: use devm_get_addr() to get base address

Currently, fdtdec_get_addr_size() does not support the address
translation, so it cannot handle device trees with non-straight
"ranges" properties. (This would be a problem with DTS for UniPhier
ARMv8 SoCs.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-uniphier

ARM: UniPhier: replace <asm/io.h> with <linux/io.h>

In the Linux coding style, it is recommended to include <linux/io.h>
rather than <asm/io.h>. Follow this trend.

Signed-off-by: Masahiro Yamada <

ARM: UniPhier: replace <asm/io.h> with <linux/io.h>

In the Linux coding style, it is recommended to include <linux/io.h>
rather than <asm/io.h>. Follow this trend.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

common: Make sure arch-specific map_sysmem() is defined

In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they

common: Make sure arch-specific map_sysmem() is defined

In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-uniphier

ARM: UniPhier: adjust device trees for business transfer

Panasonic's System LSI products, UniPhier SoC family, have been
transferred to Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahir

ARM: UniPhier: adjust device trees for business transfer

Panasonic's System LSI products, UniPhier SoC family, have been
transferred to Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'master' of git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-dm

dm: i2c: Move slave details to child platdata

At present we go through various contortions to store the I2C's chip
address in its private data. This only exists when the chip is active so
must be se

dm: i2c: Move slave details to child platdata

At present we go through various contortions to store the I2C's chip
address in its private data. This only exists when the chip is active so
must be set up when it is probed. Until the device is probed we don't
actually record what address it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the address when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

show more ...

i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller

This commit adds on-chip I2C driver used on newer SoCs of Panasonic
UniPhier platform.

Signed-off-by: Masahiro Yamada <yamada.m@jp

i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller

This commit adds on-chip I2C driver used on newer SoCs of Panasonic
UniPhier platform.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...