SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-usb

dfu: remove limitation on partition size

Change long (32 bits on arm) to u64 (same type than offset)
for size and read offset r_left

So partition and device used for DFU can be greater than 4GB

Si

dfu: remove limitation on partition size

Change long (32 bits on arm) to u64 (same type than offset)
for size and read offset r_left

So partition and device used for DFU can be greater than 4GB

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

show more ...

dfu: allow dfu read on partition greater than 2GB

solve issue on get_medium_size() function
the detection of error is a simple test < 0
but for ARM platform, long is 32bits and 2GB = 0x80000000
is s

dfu: allow dfu read on partition greater than 2GB

solve issue on get_medium_size() function
the detection of error is a simple test < 0
but for ARM platform, long is 32bits and 2GB = 0x80000000
is seen as error.

I solve the issue by changing the prototype fo the function
to separate size and result.
This patch prepare the next patch with size change to u64.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

show more ...

Merge git://git.denx.de/u-boot-usb

dfu: dfu_sf: Fix read offset

The offset was applied to write, but not read, now its applied to
both.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>

Merge git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-usb

dfu: dfu_sf: Pass duplicate devstr to parse_dev

parse_dev() alters the string pointed by devstr parameter. Due to this
subsequent parsing of sf entities will fail, as string pointed by devstr
is no

dfu: dfu_sf: Pass duplicate devstr to parse_dev

parse_dev() alters the string pointed by devstr parameter. Due to this
subsequent parsing of sf entities will fail, as string pointed by devstr
is no longer valid sf dev arguments.
Fix this by passing pointer to the copy of the string to parse_dev
instead of pointer to the actual devstr.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

dfu: dfu_sf: Take the start address into account

The dfu_alt_info_spl variable allows passing a starting point
for the binary to be flashed in the SPI NOR.

For example, if we have 'dfu_alt_info_spl

dfu: dfu_sf: Take the start address into account

The dfu_alt_info_spl variable allows passing a starting point
for the binary to be flashed in the SPI NOR.

For example, if we have 'dfu_alt_info_spl=spl raw 0x400', this means
that we want to flash the binary starting at address 0x400.

In order to do so we need to erase the entire sector and write to
the the subsequent SPI NOR sectors taking such start address
into account for the address calculations.

Tested by succesfully writing SPL binary into 0x400 offset and
the u-boot.img at offset 64 kiB of a SPL NOR.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Use lldiv for the math]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

dfu: dfu_sf: Use the erase sector size for erase operations

SPI NOR flashes need to erase the entire sector size and we cannot pass
any arbitrary length for the erase operation.

To illustrate the p

dfu: dfu_sf: Use the erase sector size for erase operations

SPI NOR flashes need to erase the entire sector size and we cannot pass
any arbitrary length for the erase operation.

To illustrate the problem:

Copying data from PC to DFU device
Download [=========================] 100% 478208 bytes
Download done.
state(7) = dfuMANIFEST, status(0) = No error condition is present
state(10) = dfuERROR, status(14) = Something went wrong, but the
device does not know what it was
Done!

In this case, the binary has 478208 bytes and the M25P32 SPI NOR
has an erase sector of 64kB.

478208 = 7 entire sectors of 64kiB + 19456 bytes.

Erasing the first seven 64 kB sectors works fine, but when trying
to erase the remainding 19456 causes problem and the board hangs.

Fix the issue by always erasing with the erase sector size.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: Add spi.h header to a few files

Some files are using SPI functions but not explitly including the SPI
header file. Fix this, since driver model needs it.

Signed-off-by: Simon Glass <sjg@chromiu

dm: Add spi.h header to a few files

Some files are using SPI functions but not explitly including the SPI
header file. Fix this, since driver model needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

show more ...

dfu: add SF backend

This allows SPI Flash to be programmed using DFU.

Signed-off-by: Stephen Warren <swarren@nvidia.com>