|
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07, v2018.03, v2018.01, v2017.11 |
|
| #
66723eda |
| 29-Dec-2016 |
Robert P. J. Day <rpjday@crashcourse.ca> |
doc/README.cfi: Update code snippet, and add example.
First, update the code snippet referenced in the README file. And
since there are only two boards that override flash_cmd_reset(),
might as well
doc/README.cfi: Update code snippet, and add example.
First, update the code snippet referenced in the README file. And
since there are only two boards that override flash_cmd_reset(),
might as well show them both.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
show more ...
|
|
Revision tags: v2016.07, openbmc-20160624-1, v2016.01-rc1, v2015.10, v2015.10-rc5, v2015.10-rc4, v2015.10-rc3, v2015.10-rc2, v2015.10-rc1, v2015.07, v2015.07-rc3, v2015.07-rc2, v2015.07-rc1, v2015.04, v2015.04-rc5, v2015.04-rc4, v2015.04-rc3, v2015.04-rc2, v2015.04-rc1, v2015.01, v2015.01-rc4, v2015.01-rc3, v2015.01-rc2, v2015.01-rc1, v2014.10, v2014.10-rc3, v2014.10-rc2 |
|
| #
6defdc0b |
| 29-Aug-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-ti
|
|
Revision tags: v2014.10-rc1 |
|
| #
3df3bc1e |
| 22-Jul-2014 |
pekon gupta <pekon@ti.com> |
board/ti/am335x: add support for beaglebone NOR Cape
This patch adds support of NOR cape[1] for both Beaglebone (white) and
Beaglebone(Black) boards. NOR Flash on this cape is connected to GPMC
chip
board/ti/am335x: add support for beaglebone NOR Cape
This patch adds support of NOR cape[1] for both Beaglebone (white) and
Beaglebone(Black) boards. NOR Flash on this cape is connected to GPMC
chip-select[0] and accesses as external memory-mapped device.
This cape has 128Mbits(16MBytes), x16, CFI compatible NOR Flash device.
As GPMC chip-select[0] can be shared by multiple capes so NOR profile is
not enabled by default in boards.cfg. Following changes are required to
enable NOR cape detection when building am335x_boneblack board profile.
Signed-off-by: Tom Rini <trini@ti.com>
show more ...
|
|
Revision tags: v2014.07, v2014.07-rc4, v2014.07-rc3, v2014.07-rc2, v2014.07-rc1, v2014.04, v2014.04-rc3, v2014.04-rc2, v2014.04-rc1, v2014.01, v2014.01-rc3, v2014.01-rc2, v2014.01-rc1, v2013.10, v2013.10-rc4, v2013.10-rc3, v2013.10-rc2, v2013.10-rc1, v2013.07, v2013.07-rc3, v2013.07-rc2, v2013.07-rc1, v2013.04, v2013.04-rc3, v2013.04-rc2, v2013.04-rc1, v2013.01.01, v2013.01, v2013.01-rc3, v2013.01-rc2, v2013.01-rc1, v2012.10, v2012.10-rc3, v2012.10-rc2, v2012.10-rc1, v2012.07, v2012.07-rc3, v2012.07-rc2, v2012.07-rc1, v2012.04.01, v2012.04, v2012.04-rc3, v2012.04-rc2, v2012.04-rc1, v2011.12, v2011.12-rc3, v2011.12-rc2, v2011.12-rc1, v2011.09, v2011.09-rc2, v2011.09-rc1, v2011.06, v2011.06-rc3, v2011.06-rc2, v2011.06-rc1, v2011.03, v2011.03-rc2, v2011.03-rc1 |
|
| #
466f0137 |
| 13-Jan-2011 |
Heiko Schocher <hs@denx.de> |
mpc5200, digsy_mtc: add support for rev5 board version
difference to previous board version:
- M29W128GH flash from Numonyx
- SDRAM ISSI IS45S16800 (Option A2 105°C)
- rev5 uses RTC RV-3029-C2
- upd
mpc5200, digsy_mtc: add support for rev5 board version
difference to previous board version:
- M29W128GH flash from Numonyx
- SDRAM ISSI IS45S16800 (Option A2 105°C)
- rev5 uses RTC RV-3029-C2
- update cs0 and cs1 baseaddr and length
depending on the detected flash size.
- added Werner Pfister <Pfister_Werner@intercontrol.de>
as maintainer for the digsy board variants
- As the M29W128GH needs a special flash_cmd_reset()
document that in the new file doc/README.cfi.
- move "#endif /* CONFIG_CMD_IDE */" to the right place
- remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5
boards
- change doc/README.cfi as Stefan Roese suggested
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
cc: Wolfgang Denk <hs@denx.de>
cc: Stefan Roese <sr@denx.de>
cc: Werner Pfister <Pfister_Werner@intercontrol.de>
cc: Detlev Zundel <dzu@denx.de>
show more ...
|