common: fit: Update board_fit_image_post_process() to pass fit and node_offset

board_fit_image_post_process() passes only start and size of the image,
but type of the image is not passed. So pass fi

common: fit: Update board_fit_image_post_process() to pass fit and node_offset

board_fit_image_post_process() passes only start and size of the image,
but type of the image is not passed. So pass fit and node_offset, to
derive information about image to be processed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
(cherry picked from commit 481d394e77915201e4ecc2d98e9cc2fbc3224991)
Change-Id: Idbc2e274d1f5a26434e42715014f0b16c29237a2

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch '2019-03-22-master-imports'

- Don't attempt to write to ext4 volumes with the metadata_csum feature
we don't support
- Correct how we build dtb files.
- Fix regression on SPL_FIT with

Merge branch '2019-03-22-master-imports'

- Don't attempt to write to ext4 volumes with the metadata_csum feature
we don't support
- Correct how we build dtb files.
- Fix regression on SPL_FIT with FIT_IMAGE_TINY
- Minor TI platform fixes

show more ...

board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef

When these were moved from mach-omap2 to board files they got placed
inside TI_SECURE_DEVICE ifdef block, they are not secure only, m

board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef

When these were moved from mach-omap2 to board files they got placed
inside TI_SECURE_DEVICE ifdef block, they are not secure only, move
them up and out.

Fixes: 413b90777f8d ("ti: fastboot: Move weak overrides to board files")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-i2c

- DM_I2C_COMPAT removal for all ti platforms from Jean-Jacques Hiblot
- Fix in i2c command help output from Chirstoph Muellner.

Merge branch 'master' of git://git.denx.de/u-boot-usb

- DWC3 and UDC cleanup

am57xx: remove non-DM I2C code

am57xx configs uses DM_I2C both in SPL and u-boot.
Remove code for non-DM I2C support.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <tri

am57xx: remove non-DM I2C code

am57xx configs uses DM_I2C both in SPL and u-boot.
Remove code for non-DM I2C support.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL

DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C
API when DM_I2C is used. The goal is to eventually remove DM

ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL

DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C
API when DM_I2C is used. The goal is to eventually remove DM_I2C_COMPAT
when all I2C "clients" have been migrated to use the DM API.
This a step in that direction for the TI based platforms.
Build tested with buildman:
buildman -dle am33xx ti omap3 omap4 omap5 davinci keystone

boot tested with:
am335x_evm, am335x_boneblack, am335x_boneblack_vboot (DM version),
am57xx_evm, dra7xx_evm, k2g_evm, am437x_evm

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

board: ti: am57xx: remove USB platform code

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

configs: am57xx_evm: Enable DM_USB and DM_USB_DEV

Enable DM_USB and DM_USB_DEV for AM57xx based boards.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.co

configs: am57xx_evm: Enable DM_USB and DM_USB_DEV

Enable DM_USB and DM_USB_DEV for AM57xx based boards.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

board; ti: am57xx: turn on USB clocks

Enable USB clocks in late init stage to support ports under DM_USB.

Signed-off-by: Vignesh R <vigneshr@ti.com>

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti

board; ti: am57xx: turn on USB clocks

Enable USB clocks in late init stage to support ports under DM_USB.

Signed-off-by: Vignesh R <vigneshr@ti.com>

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

ti: fastboot: Move weak overrides to board files

Overriding fastboot_set_reboot_flag() in arch/arm/mach-omap2/boot-common.c
leaves it applying all boards that derive from this, not just the ones whi

ti: fastboot: Move weak overrides to board files

Overriding fastboot_set_reboot_flag() in arch/arm/mach-omap2/boot-common.c
leaves it applying all boards that derive from this, not just the ones which
have support for Android bootloader flow. Move the weak function override to
the relevant board files.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-mmc

ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1

Since DRA7xx/AM57xx SR1.1 and SR1.0 has errata to limit the frequency of
MMC1 to 96MHz and frequency of MMC2 to 48MHz for AM572x SR1.1, lim

ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1

Since DRA7xx/AM57xx SR1.1 and SR1.0 has errata to limit the frequency of
MMC1 to 96MHz and frequency of MMC2 to 48MHz for AM572x SR1.1, limit the
frequency and disable higher speed modes for those revision.
Also use the recommended IO delays (those tagged with "rev11")

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

show more ...

Merge git://git.denx.de/u-boot-usb

usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions

board_usb_init()/_cleanup() should be in board files and don't have
a place in the xhci-omap driver. Weak versio

usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions

board_usb_init()/_cleanup() should be in board files and don't have
a place in the xhci-omap driver. Weak versions for
board_usb_init()/_cleanup() already exist in common/usb.c
(for host mode) and drivers/usb/gadget/g_dnl.c (for gadget mode).

Therefore, remove init and cleanup functions from xhci-omap and
implement them in the board files.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

ARM: dts: am574x-idk: Add initial support

Add initial dts support for am574x-idk

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

board: ti: am574x-idk: Update pinmux using latest PMT

Update the board pinmux for AM574x-IDK board using latest PMT[1] and the
board files named am574x_idk_v1p3b_sr2p0 that were auto generated on
13

board: ti: am574x-idk: Update pinmux using latest PMT

Update the board pinmux for AM574x-IDK board using latest PMT[1] and the
board files named am574x_idk_v1p3b_sr2p0 that were auto generated on
13th October, 2017 by "Ahmad Rashed <a-rashed@ti.com>".

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

board: ti: am574x-idk: Add ddr data support

AM574x-idk has the following DDR parts attached:
EMIF1: MT41K256M16HA (1GB with ECC)
EMIF2: MT41K256M16HA (1GB without ECC)

Enabling 2GB DDR without inte

board: ti: am574x-idk: Add ddr data support

AM574x-idk has the following DDR parts attached:
EMIF1: MT41K256M16HA (1GB with ECC)
EMIF2: MT41K256M16HA (1GB without ECC)

Enabling 2GB DDR without interleaving between EMIFs. And
enabling ECC on EMIF1.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>

show more ...

board: ti: am574x-idk: Add hw data support

Update prcm, voltages and pinmux support for am574x-idk.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

board: ti: am574x-idk: Add epprom support

am574x-idk is a board based on TI's am574 processor
Add eeprom support.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

board: ti: am57xx: Add dt support for BeagleBoard-X15 revC

Add support for selecting proper dtb for
am57xx BeagleBoard X15 revC u-boot from FIT

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Revi

board: ti: am57xx: Add dt support for BeagleBoard-X15 revC

Add support for selecting proper dtb for
am57xx BeagleBoard X15 revC u-boot from FIT

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

board: ti: am571x: Add 666MHz support for AM571x IDK

AM571x supports DDR running at 666MHz. Right now it is
clocked at 532MHz which is lower than what is supported.
In order to have maximum performa

board: ti: am571x: Add 666MHz support for AM571x IDK

AM571x supports DDR running at 666MHz. Right now it is
clocked at 532MHz which is lower than what is supported.
In order to have maximum performance on AM571-IDK,
switch DDR to 666MHz.

Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...