Merge tag 'u-boot-imx-2019-02-16' of git://git.denx.de/u-boot-imx

u-boot-imx-2019-02-16
---------------------

- vhybrid: add calibration
- gw_ventana: fixes
- Improve documentation for Secure Boot

Merge tag 'u-boot-imx-2019-02-16' of git://git.denx.de/u-boot-imx

u-boot-imx-2019-02-16
---------------------

- vhybrid: add calibration
- gw_ventana: fixes
- Improve documentation for Secure Boot (HABv4)
- Fix Marvell Switch
- MX6 Sabre, switch to DM
- Fixes for NAND

show more ...

imx: ventana: add support for GW5905

The GW5905 is single-board tablet computer based on the i.MX6 SoC with the
following peripheral set:
- eMMC flash (boot device)
- microSD expansion
- LVDS dis

imx: ventana: add support for GW5905

The GW5905 is single-board tablet computer based on the i.MX6 SoC with the
following peripheral set:
- eMMC flash (boot device)
- microSD expansion
- LVDS display connector for off-board 3D+1C with PWM backlight
and I2C based touch controller
- MIPI camera connector supporting the TRULY CM8487-B500SA-E (OV5640)
- ublox EMMY-W1 WiFi/Bluetooth/NFC module (SDIO/UART)
- ublox ZOE-M8Q GPS
- LSM9DS1 9-DOF IMU
- 1x 1-lane miniPCIe socket with USB 2.0
- Gateworks System Controller
- Audio jack with TLV320AIC Audio Codec, Speaker AMP
and TSA227E Headphone detect
- MAX8607 3-mode LED camera flash
- DECT ULE module
- FUSB302 USB-C PD and ISL9238 Battery charger

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-imx

imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL

The command can only be used from full U-Boot, so do not build it into
SPL.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <

imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL

The command can only be used from full U-Boot, so do not build it into
SPL.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>

imx: ventana: add GW560x support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

treewide: replace #include <asm/errno.h> with <linux/errno.h>

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap <asm-generic/errno.h>)

Replace

treewide: replace #include <asm/errno.h> with <linux/errno.h>

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx: ventana: add GW553x support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: gsc: show board temp on boot

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: gsc: fix negative temperature readings

The GSC Temperature sensor is a 2's complement value - adjust accordingly
for negative temperatures.

Signed-off-by: Tim Harvey <tharvey@gatework

imx: ventana: gsc: fix negative temperature readings

The GSC Temperature sensor is a 2's complement value - adjust accordingly
for negative temperatures.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: gsc: add gsc sleep command

The Gateworks System Controller on Ventana boards has the ability to
disable the board's primary power supply until the RTC hits a specific
time. When sleepi

imx: ventana: gsc: add gsc sleep command

The Gateworks System Controller on Ventana boards has the ability to
disable the board's primary power supply until the RTC hits a specific
time. When sleeping a button-down event on the GSC user pushbutton will
wake the board before it's wake time has been reached. This feature is
referred to as GSC sleep.

Add a command to invoke sleep mode for a specified number of seconds.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: gsc: remove dependence on env

remove dependence on getenv() by using global board info struct for model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: move GSC boot watchdog disable function to gsc.c

Move the code that disables the GSC boot watchdog into gsc.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog

This adds information about the Gateworks System Controller to the gsc command
such as the firmware version, firmware CRC a

imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog

This adds information about the Gateworks System Controller to the gsc command
such as the firmware version, firmware CRC and status of the GSC watchdog
(if its enabled and if its tripped).

Additionally the 'gsc wd' command can be used to enable or disable the
watchdog with the following usage:
gsc wd enable [30|60]
gsc wd disable

Note that the GSC registers are battery-backed by the GSC coincell so once
eanbled, they remain enabled across power-cycles or until either the GSC
firmware has been updated or FLASH has been re-programmed by the Gateworks
JTAG adapter.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: gsc: add new hwmon rails

Add a new voltage rail added in various -C revision PCB's.

Additionally make VDD_CORE, VDD_SOC, and VDD_IO2 common as all Ventana boards
have those.

Signed-o

imx: ventana: gsc: add new hwmon rails

Add a new voltage rail added in various -C revision PCB's.

Additionally make VDD_CORE, VDD_SOC, and VDD_IO2 common as all Ventana boards
have those.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: remove GSC hwmon voltage rail min/max test

The min/max of each depends not only on board but on CPU. Simplify by removing
this rarely needed and difficult to maintain feature and just

imx: ventana: remove GSC hwmon voltage rail min/max test

The min/max of each depends not only on board but on CPU. Simplify by removing
this rarely needed and difficult to maintain feature and just display the
rails and their values.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'uboot'

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

imx: ventana: add GW5520 support

The GW5520 has an IMX6Q SoC with 512MB of DDR3, 256MB of NAND flash as well as:
* 2x MiniPCIe sockets
* 2x USB host sockets
* 2x i210 GigE
* HDMI out
* digital

imx: ventana: add GW5520 support

The GW5520 has an IMX6Q SoC with 512MB of DDR3, 256MB of NAND flash as well as:
* 2x MiniPCIe sockets
* 2x USB host sockets
* 2x i210 GigE
* HDMI out
* digital I/O expansion

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx