Merge branch '2019-02-19-master-imports'

- Convert some OMAP3 platforms to DM+SPL
- Various minor fixes
- Updates for hikey, DaVinci, am57xx platforms,
- Make FAT use less memory

board/BuR/brxre1: convert do DM

This commit converts the brxre1 board to DM,
for this we have todo following things:

- add a devicetree-file for this board
- drop all obsolete settings from board h

board/BuR/brxre1: convert do DM

This commit converts the brxre1 board to DM,
for this we have todo following things:

- add a devicetree-file for this board
- drop all obsolete settings from board header-file
- use dm_i2c_xxx calls for read/write to the resetcontroller
- request gpios before operate them

Serues-cc: trini@konsulko.com
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

show more ...

Merge branch '2019-02-08-master-imports'

- bcm6345 watchdog, bcm63158/bcm963158 initial support.
- Various TI platform resyncs and improvements.
- FDT support in Android-format images.
- stm32mp1 im

Merge branch '2019-02-08-master-imports'

- bcm6345 watchdog, bcm63158/bcm963158 initial support.
- Various TI platform resyncs and improvements.
- FDT support in Android-format images.
- stm32mp1 improvements.

show more ...

board/BuR/brppt1: drop DM_I2C_COMPAT

The TPS62517 PMIC driver has been partially converted to DM, so the
legacy I2C access layer isn't needed anymore.

Signed-off-by: Hannes Schmelzer <hannes.schmel

board/BuR/brppt1: drop DM_I2C_COMPAT

The TPS62517 PMIC driver has been partially converted to DM, so the
legacy I2C access layer isn't needed anymore.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

show more ...

board/BuR/brppt1: convert brppt1 boards to driver model

- add a devicetree for each variant (mmc, spi, nand)
- drop unneeded code from board and bur/common
- drop unneeded stuff from config header f

board/BuR/brppt1: convert brppt1 boards to driver model

- add a devicetree for each variant (mmc, spi, nand)
- drop unneeded code from board and bur/common
- drop unneeded stuff from config header files
- minor adaptions to be compliant with driver model (requesting gpio,..)
- harmonize the commandset over all brppt1 targets

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

board/BuR/common: refactor ft_board_setup(...)

On other OS, not one provided by B&R, it is not guaranteed that there
are factory-settings within a devicetree. So we must not treat the
absence of the

board/BuR/common: refactor ft_board_setup(...)

On other OS, not one provided by B&R, it is not guaranteed that there
are factory-settings within a devicetree. So we must not treat the
absence of them as error.
Further we've the fact that on different version of the device-tree
files there are different namings of the factory-settings, we consider
this with searching for an alternative name.

changing things as following:

- don't treat as error if the bootloader version cannot written into
devicetree.

- since the naming of the factory-settings are different in different
versions of the provided device-tree we search for the alternate name
"/fset"

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

board/BuR/common: fix PMIC mpu-pll setup

If a board-code calls the pmicsetup(u32 mpupll) with a mpupll value
!= 0 it wants to force some frequency with the value provided by mpupll.
Setting up 1 GH

board/BuR/common: fix PMIC mpu-pll setup

If a board-code calls the pmicsetup(u32 mpupll) with a mpupll value
!= 0 it wants to force some frequency with the value provided by mpupll.
Setting up 1 GHz is wrong here.

Nobody did take notice about that yet, since every board calls this
function with zero.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

board/BuR/common: remove interface Label from summary screen

This interface names may vary over different products, to consider this
fact we replace the interface label "IF1" and "IF2" on the summar

board/BuR/common: remove interface Label from summary screen

This interface names may vary over different products, to consider this
fact we replace the interface label "IF1" and "IF2" on the summary
screen with some more generic wording "MAC1" and "MAC2".

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

board/BuR/common: make CONFIG_LCD optional

Since we're going to drop LCD-support on brppt1 boards, we have to make
this stuff here optional and remove the #error path.

We also move out the ft_board

board/BuR/common: make CONFIG_LCD optional

Since we're going to drop LCD-support on brppt1 boards, we have to make
this stuff here optional and remove the #error path.

We also move out the ft_board_setup(...) from this #ifdef because
there's no relationship with the LCD-code and on the other hand this is
still needed in future even with LCD-support off.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

board/BuR/common: drop simple-framebuffer setup

The linux systems running on the brppt1 targets are using modern DRM
drivers since long time ago. Further we are going to drop the LCD
support complet

board/BuR/common: drop simple-framebuffer setup

The linux systems running on the brppt1 targets are using modern DRM
drivers since long time ago. Further we are going to drop the LCD
support completely on this board, so the simple-framebuffer setup
becomes obsolete.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

board/BuR: drop devicetree loading and lcd setup for linux-targets

This patch drops the lcd-screen setup, the summary screen and getting
mac-addresses based on a previous loaded device-tree for lin

board/BuR: drop devicetree loading and lcd setup for linux-targets

This patch drops the lcd-screen setup, the summary screen and getting
mac-addresses based on a previous loaded device-tree for linux targets.
Selecting those linux target is simple, since we have only the brppt1.

In detail we do:
- drop the common lcd-setup code which relys on a fdt_blob
- drop the common dtb loading mechanism
- drop the now obsolete CONFIG_USE_FDT from board header and whitelist.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

net: Move enetaddr env access code to env config instead of net config

In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

Thi

net: Move enetaddr env access code to env config instead of net config

In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

board/ti/am335x/built-in.o: In function `board_late_init':
board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>

show more ...

Merge git://git.denx.de/u-boot-video

board/BuR: provide real clock-frequency instead a divider

Actual am335x-fb implementation takes now a real clock frequency instead
a divider. So this component doesn't need to know anymore some base

board/BuR: provide real clock-frequency instead a divider

Actual am335x-fb implementation takes now a real clock frequency instead
a divider. So this component doesn't need to know anymore some base
frequency of the LCDC, we simply provide the pixel-clock frequency.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

show more ...

env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()

We are now using an env_ prefix for environment functions. Rename these
for consistency. Also add function comments in common.h.

Suggested-b

env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()

We are now using an env_ prefix for environment functions. Rename these
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

env: Rename getenv/_f() to env_get()

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few place

env: Rename getenv/_f() to env_get()

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()

Rename this function for consistency with env_set().

Signed-off-by: Simon Glass <sjg@chromium.org>

env: Rename setenv() to env_set()

We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd

env: Rename setenv() to env_set()

We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

board: BuR: use get_nand_dev_by_index()

As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing

board: BuR: use get_nand_dev_by_index()

As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

board/BuR/brxre1: fix MMC boot

since commit

'd5abcf94c7123167725fc22ace342f0d455093c1' -
ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

MMC boot on brxre1 board is brok

board/BuR/brxre1: fix MMC boot

since commit

'd5abcf94c7123167725fc22ace342f0d455093c1' -
ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

MMC boot on brxre1 board is broken, with this commit we make our board
working again.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
match other TI platforms in the same situation.

Signed-off-by: Tom Ri

Merge branch 'master' of git://git.denx.de/u-boot-mmc

- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
match other TI platforms in the same situation.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.

This commit wa

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.

This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

board/BuR/common: incorrect check of dtb

The logical expression to check the dtb is incorrect in
load_devicetree.

The problem was indicated by cppcheck.

The inconsistent variable name dtppart is c

board/BuR/common: incorrect check of dtb

The logical expression to check the dtb is incorrect in
load_devicetree.

The problem was indicated by cppcheck.

The inconsistent variable name dtppart is changed to dtbpart.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at>

show more ...