Merge git://git.denx.de/u-boot-x86

x86: Switch to use DM sysreset driver

This converts all x86 boards over to DM sysreset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andy Shev

x86: Switch to use DM sysreset driver

This converts all x86 boards over to DM sysreset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

show more ...

Merge git://git.denx.de/u-boot-x86

x86: irq: Remove chipset specific irq router drivers

At present there are 3 irq router drivers. One is the common one
and the other two are chipset specific for queensbay and quark.
However these ar

x86: irq: Remove chipset specific irq router drivers

At present there are 3 irq router drivers. One is the common one
and the other two are chipset specific for queensbay and quark.
However these are really the same drivers as the core logic is
the same. The two chipset specific drivers configure some registers
that are outside the irq router block which should really be part
of the chipset initialization.

Now we remove these specific drivers and make all x86 boards use
the common one.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: galileo: Enable CPU driver

Add a cpu node in the device tree and enable CPU driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

x86: dts: Update to include ACTL register details

This updates all x86 boards that currently have IRQ router in the
dts files to include ACTL register details.

Signed-off-by: Bin Meng <bmeng.cn@gma

x86: dts: Update to include ACTL register details

This updates all x86 boards that currently have IRQ router in the
dts files to include ACTL register details.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ich6_gpio: Convert to use proper DM API

At present this GPIO driver still uses the legacy PCI API. Now that
we have proper PCH drivers we can use those to obtain the information
we need. While

x86: ich6_gpio: Convert to use proper DM API

At present this GPIO driver still uses the legacy PCI API. Now that
we have proper PCH drivers we can use those to obtain the information
we need. While the device tree has nodes for the GPIO peripheral it is
not in the right place. It should be on the PCI bus as a sub-peripheral
of the PCH device.

Update the device tree files to show the GPIO controller within the PCH,
so that PCI access works as expected. This also adds '#address-cells'
and '#size-cells' to the PCH node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

spi: ich: Use compatible strings to distinguish controller version

At present ich spi driver gets the controller version information via
pch, but this can be simply retrieved via spi node's compatib

spi: ich: Use compatible strings to distinguish controller version

At present ich spi driver gets the controller version information via
pch, but this can be simply retrieved via spi node's compatible string.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: Correct spi node alias

With recent changes spi node was moved to a place as a subnode under
pch, so update the alias to refer to its correct place as well.

Signed-off-by: Bin Meng <bmeng.cn@gm

x86: Correct spi node alias

With recent changes spi node was moved to a place as a subnode under
pch, so update the alias to refer to its correct place as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

dm: x86: quark: Add an interrupt driver

Add a driver for interrupts on quark and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Rev

dm: x86: quark: Add an interrupt driver

Add a driver for interrupts on quark and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

dm: x86: spi: Convert ICH SPI driver to driver model PCI API

At present this SPI driver works by searching the PCI buses for its
peripheral. It also uses the legacy PCI API.

In addition the driver

dm: x86: spi: Convert ICH SPI driver to driver model PCI API

At present this SPI driver works by searching the PCI buses for its
peripheral. It also uses the legacy PCI API.

In addition the driver has code to determine the type of Intel PCH that is
used (version 7 or version 9). Now that we have proper PCH drivers we can
use those to obtain the information we need.

While the device tree has a node for the SPI peripheral it is not in the
right place. It should be on the PCI bus as a sub-peripheral of the LPC
device.

Update the device tree files to show the SPI controller within the PCH, so
that PCI access works as expected.

This patch includes Bin's fix-up patch from here:

https://patchwork.ozlabs.org/patch/569478/

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Fix PCI UART compatible string for crownbay and galileo

With recent ns16550 driver changes, we only changed the legacy UART
(at I/O port 0x3f8) compatible string, but forgot to change the PCI
U

x86: Fix PCI UART compatible string for crownbay and galileo

With recent ns16550 driver changes, we only changed the legacy UART
(at I/O port 0x3f8) compatible string, but forgot to change the PCI
UART compatible string. Now fix it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Convert to use driver model timer

Convert all x86 boards to use driver model tsc timer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-x86

x86: galileo: Enable mrc cache

Now that we have added MRC cache on quark support codes,
enable it on Intel Galileo board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chr

x86: galileo: Enable mrc cache

Now that we have added MRC cache on quark support codes,
enable it on Intel Galileo board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge remote-tracking branch 'u-boot/master'

Merge git://git.denx.de/u-boot-x86

x86: galileo: Add PCIe root port IRQ routing

Now we have enabled PCIe root port on Quark SoC, add its PIRQ
routing information in the device tree as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.co

x86: galileo: Add PCIe root port IRQ routing

Now we have enabled PCIe root port on Quark SoC, add its PIRQ
routing information in the device tree as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Convert to use driver model pci on quark/galileo

Move to driver model pci for Intel quark/galileo.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

x86: Enable DM RTC support for all x86 boards

Add a RTC node in the device tree to enable DM RTC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
(Squa

x86: Enable DM RTC support for all x86 boards

Add a RTC node in the device tree to enable DM RTC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
(Squashed in 'x86: Fix RTC build error on ivybridge')

show more ...