i2c: eeprom: Use reg property instead of offset and size

Remove adhoc dt binding for fixed-partition definition for i2c eeprom.
fixed-partition are using reg property instead of offset/size pair.

(

i2c: eeprom: Use reg property instead of offset and size

Remove adhoc dt binding for fixed-partition definition for i2c eeprom.
fixed-partition are using reg property instead of offset/size pair.

(cherry picked from commit f692b479f02d9b2689b0686f1f6ff2f06c6ecc59)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tan Siewert <tan.siewert@hetzner.com>
Link: https://patch.msgid.link/20250117094434.16641-13-tan.siewert@hetzner.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

show more ...

dm: Add a No-op uclass

This uclass is intended for devices that do not need any features from the
uclass, including binding children.
This will typically be used by devices that are used to bind chi

dm: Add a No-op uclass

This uclass is intended for devices that do not need any features from the
uclass, including binding children.
This will typically be used by devices that are used to bind child devices
but do not use dm_scan_fdt_dev() to do it. That is for example the case of
several USB wrappers that have 2 child devices (1 for device and 1 for
host) but bind only one at a any given time.

(cherry-picked from 07e33711fec4f1106f36805b5dc830da07c783c5)

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220207231334.59845-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

Merge git://git.denx.de/u-boot-riscv

- SiFive FU540 Support

clk: Add fixed-factor clock driver

This patch adds fixed-factor clock driver which derives clock
rate by dividing (div) and multiplying (mult) fixed factors
to a parent clock.

Signed-off-by: Atish

clk: Add fixed-factor clock driver

This patch adds fixed-factor clock driver which derives clock
rate by dividing (div) and multiplying (mult) fixed factors
to a parent clock.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-x86

- Add support for sound.

Albeit the big changeset, changes are pretty limited to x86 only and a
few new sound drivers used by x86 so I think it would be good to h

Merge git://git.denx.de/u-boot-x86

- Add support for sound.

Albeit the big changeset, changes are pretty limited to x86 only and a
few new sound drivers used by x86 so I think it would be good to have
this in the next release.

show more ...

sandbox: sound: Silence sound for testing

When testing the sound system we don't need the hear the beeps. The
testing works by checking the data that would be emitted. Add a
device-tree property to

sandbox: sound: Silence sound for testing

When testing the sound system we don't need the hear the beeps. The
testing works by checking the data that would be emitted. Add a
device-tree property to silence the sound, and enable it for testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

sandbox: pch: Add a test for the PCH uclass

This uclass currently has no tests. Add a sandbox driver and some simple
tests to provide basic coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
R

sandbox: pch: Add a test for the PCH uclass

This uclass currently has no tests. Add a sandbox driver and some simple
tests to provide basic coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Use "sandbox,pch" for the compatible string, for consistency]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch '2019-01-14-master-imports'

- MediaTek improvements (eth support)
- DM conversion for HI6220
- ISEE, Toby Churchill, other platform updates
- Various format code printf fixes
- Build ra

Merge branch '2019-01-14-master-imports'

- MediaTek improvements (eth support)
- DM conversion for HI6220
- ISEE, Toby Churchill, other platform updates
- Various format code printf fixes
- Build race fixes
- Command repeat functionality enhanced, command autocomplete support
enhanced.

show more ...

test: bootcount: add bootcount-uclass test

Add a test for the bootcount uclass, which uses the RTC bootcount backend
(i.e. drivers/bootcount/rtc.c is implictly also tested).

Signed-off-by: Philipp

test: bootcount: add bootcount-uclass test

Add a test for the bootcount uclass, which uses the RTC bootcount backend
(i.e. drivers/bootcount/rtc.c is implictly also tested).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge tag 'dm-pull-14dec18' of git://git.denx.de/u-boot-dm

Complete conversion of sound to driver model

dm: core: Add a function to read into a unsigned int

The current dev_read...() functions use s32 and u32 which are convenient
for device tree but not so useful for normal code, which often wants to

dm: core: Add a function to read into a unsigned int

The current dev_read...() functions use s32 and u32 which are convenient
for device tree but not so useful for normal code, which often wants to
use normal integers for values.

Add a helper which supports returning an unsigned int. Also add signed
versions of the unsigned readers.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: sound: Create a uclass for sound

The sound driver pulls together the audio codec and i2s drivers in order
to actually make sounds. It supports setup() and play() methods. The
sound_find_codec_i2

dm: sound: Create a uclass for sound

The sound driver pulls together the audio codec and i2s drivers in order
to actually make sounds. It supports setup() and play() methods. The
sound_find_codec_i2s() function allows locating the linked codec and i2s
devices. They can be referred to from uclass-private data.

Add a uclass and a test for sound.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: sound: Create a uclass for i2s

The i2s bus is commonly used with audio codecs. It provides a way to
stream digital data sychronously in both directions. U-Boot only supports
audio output, so thi

dm: sound: Create a uclass for i2s

The i2s bus is commonly used with audio codecs. It provides a way to
stream digital data sychronously in both directions. U-Boot only supports
audio output, so this uclass is very simple, with a single tx_data()
method.

Add a uclass and a test for i2s.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: sound: Create a uclass for audio codecs

An audio codec provides a way to convert digital data to sound and vice
versa. Add a simple uclass which just supports setting the parameters for
the code

dm: sound: Create a uclass for audio codecs

An audio codec provides a way to convert digital data to sound and vice
versa. Add a simple uclass which just supports setting the parameters for
the codec.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

- DWC3 and UDC cleanup

Merge branch '2018-12-06-master-imports'

- Various FAT fixes
- Hardware spinlock uclass
- DMA uclass
- Various am335x fixes
- DT resyncs for a number of TI platforms
- stm32 updates

syscon: dm: Add a new method to get a regmap from DTS

syscon_regmap_lookup_by_phandle() can be used to get the regmap of a syscon
device from a reference in the DTS. It operates similarly to the lin

syscon: dm: Add a new method to get a regmap from DTS

syscon_regmap_lookup_by_phandle() can be used to get the regmap of a syscon
device from a reference in the DTS. It operates similarly to the linux
version of the namesake function.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

test: dma: add dma-uclass test

Add a sandbox DMA driver implementation (provider) and corresponding DM
test.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Grygorii Strashko <grygorii.st

test: dma: add dma-uclass test

Add a sandbox DMA driver implementation (provider) and corresponding DM
test.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

show more ...

dm: Add Hardware Spinlock class

This is uclass for Hardware Spinlocks.
It implements two mandatory operations: lock and unlock
and one optional relax operation.

Signed-off-by: Benjamin Gaignard <be

dm: Add Hardware Spinlock class

This is uclass for Hardware Spinlocks.
It implements two mandatory operations: lock and unlock
and one optional relax operation.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

show more ...

Merge tag 'dm-pull-5dec18' of git://git.denx.de/u-boot-dm

Minor sandbox enhancements / fixes
tpm improvements to clear up v1/v2 support
buildman toolchain fixes
New serial options to set/get config

dm: core: add functions to get/remap I/O addresses by name

This functions allow us to get and remap I/O addresses by name, which is useful when there are multiple reg addresses indexed by reg-names

dm: core: add functions to get/remap I/O addresses by name

This functions allow us to get and remap I/O addresses by name, which is useful when there are multiple reg addresses indexed by reg-names property.
This is needed in bmips dma/eth patch series, but can also be used on many
other drivers.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge tag 'pull-30nov18' of git://git.denx.de/u-boot-dm

Fix sound on sandbox
Convert TPM fully to DM
Tidy up sandbox I2C emulation
Add a 'make qcheck' target for faster testing
A few other misc thin

Merge tag 'pull-30nov18' of git://git.denx.de/u-boot-dm

Fix sound on sandbox
Convert TPM fully to DM
Tidy up sandbox I2C emulation
Add a 'make qcheck' target for faster testing
A few other misc things
(dropped the final patch which breaks clang for some reason)

show more ...

dm: sandbox: i2c: Use new emulator parent uclass

Update the device tree, sandbox i2c driver and tests to use the new
emulation parent to hold emulators.

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge branch '2018-11-16-master-imports'

- Initial bcm968580xref, am65x_evm_r5 support
- lpc32xx, omap3_logic/am3517_evm updates
- pinctrl command
- fs_loader available for SPL

test/py: test pinmux command

Add pinmux test which test the following commands:
- pinmux list
- pinmux dev
- pinmux status

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by:

test/py: test pinmux command

Add pinmux test which test the following commands:
- pinmux list
- pinmux dev
- pinmux status

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Mark some tests as sandbox-centric]
Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...