Merge tag 'dm-pull-5dec18' of git://git.denx.de/u-boot-dm

Minor sandbox enhancements / fixes
tpm improvements to clear up v1/v2 support
buildman toolchain fixes
New serial options to set/get config

sandbox: Zero the ram buffer on startup

At present the RAM buffer is not inited unless it is read from a file,
likely produced by an earlier phase of U-Boot. This causes valgrind
warnings whenever t

sandbox: Zero the ram buffer on startup

At present the RAM buffer is not inited unless it is read from a file,
likely produced by an earlier phase of U-Boot. This causes valgrind
warnings whenever the RAM buffer is used. Correct this by initing it if
needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch '2018-11-25-master-imports'

- Bring in the series from Simon for SPL logging support and bloblist

sandbox: Add a new 'sb' command

The old 'sb' command was deprecated in 2015 and replaced with 'host'. It
is useful to be able to access some internal sandbox state, particularly
for testing.

Resurr

sandbox: Add a new 'sb' command

The old 'sb' command was deprecated in 2015 and replaced with 'host'. It
is useful to be able to access some internal sandbox state, particularly
for testing.

Resurrect the old command and provide a way to print some basic state
information (currently just the arguments to sandbox).

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

sandbox: Add an option to display of-platdata in SPL

At present we don't have a test that of-platdata can be accessed in SPL.
Add this in as a command-line option to SPL.

Signed-off-by: Simon Glass

sandbox: Add an option to display of-platdata in SPL

At present we don't have a test that of-platdata can be accessed in SPL.
Add this in as a command-line option to SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge tag 'dm-9oct18' of git://git.denx.de/u-boot-dm

Test improvements to tidy up output and drop duplicate tests
Sandbox SPL/TPL support
Various dm-related improvements

sandbox: Remove the old memory file later

When debugging sandbox it is sometimes annoying that the memory file is
deleted early on. If sandbox later crashes or we quit (using the
debugger), it is no

sandbox: Remove the old memory file later

When debugging sandbox it is sometimes annoying that the memory file is
deleted early on. If sandbox later crashes or we quit (using the
debugger), it is not possible to run it again with the same state since
the memory file is gone.

Remove the old memory file when sandbox exits, instead. Also add debugging
showing the memory filename.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

sandbox: Add a flag to set the default log level

It is useful to be able to set the default log level from the command line
when running sandbox. Add a new -L command-line flag for this. The log
lev

sandbox: Add a flag to set the default log level

It is useful to be able to set the default log level from the command line
when running sandbox. Add a new -L command-line flag for this. The log
level is set using the enum log_level_t in log.h. At present a number must
be specified, e.g. -L7 for debug.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation

SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_

sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation

SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN)
to fit different boot stage.

Signed-off-by: Andy Yan <andyshrk@gmail.com>

Changes in v3:
- use CONFIG_VAL(), which suggested by Simon

Changes in v2: None

arch/sandbox/cpu/start.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()

We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad o

board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()

We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad options after we
print the banner. In fact, it seems better.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

board_f: sandbox: Move setup_ram_buf() to private code

There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it

board_f: sandbox: Move setup_ram_buf() to private code

There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it
into sandbox's private code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

Merge git://git.denx.de/u-boot-dm

sandbox: Don't include the main loop in SPL

SPL does not have a command interface so we should not include the main loop
code.

Signed-off-by: Simon Glass <sjg@chromium.org>

sandbox: Avoid calling commands when not available

Don't try to run commands when not supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

test: Record and silence console in tests

When running sandbox tests, silence the console to avoid unwanted output.
Also, record the console in case tests want to check it.

The -v option can be use

test: Record and silence console in tests

When running sandbox tests, silence the console to avoid unwanted output.
Also, record the console in case tests want to check it.

The -v option can be used to enable stdout during tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

sandbox: Add missing errno.h includes in a few files

These files use error numbering, so add the include.

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot-dm

sandbox: Don't try distro_bootcmd by default

For the distro_bootcmds to succeed on the sandbox a bit of setup is
required (e.g. network configured or host image bound), so running them
by default is

sandbox: Don't try distro_bootcmd by default

For the distro_bootcmds to succeed on the sandbox a bit of setup is
required (e.g. network configured or host image bound), so running them
by default isn't that useful.

Add a -b/--boot command to the sandbox binary, which triggers the
distro_bootcmds to run after the other command-line commands.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'sandbox' of git://git.denx.de/u-boot-x86

sandbox: Return '-c command' exit value as sandbox exit code

When a command is passed into sandbox using the '-c' argument the
command is run directly. This is most helpful when running tests (such

sandbox: Return '-c command' exit value as sandbox exit code

When a command is passed into sandbox using the '-c' argument the
command is run directly. This is most helpful when running tests (such
as test-dm.sh). Previously the exit code was an unused enum. Change it
to be the actual return code from the command so that the script calling
sandbox can know if the command succeeded (tests passed). Also remove
the now completely unused "exit_state" in sandbox.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge branch 'patman' of git://git.denx.de/u-boot-x86