Merge tag 'xilinx-for-v2018.09' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.09

clk:
- Fix zynqmp clock driver

common:
- Handle CMD_RET_USAGE in cmd_process_error
- Use return m

Merge tag 'xilinx-for-v2018.09' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.09

clk:
- Fix zynqmp clock driver

common:
- Handle CMD_RET_USAGE in cmd_process_error
- Use return macros in cmd_process_error
- Fix duplication of CONFIG_SYS_PROMPT_HUSH_PS2
- Support watchdog in usb_kbd.c
- Fix name usage in usb_kbd.c
- Support systems with non zero memory start initialized from DT only

gpio:
- Add support for manual relocation in uclass
- zynq - use live tree
- zynq - fix match data reading
- zynq - setup bank name
- xilinx - convert driver to DM

microblaze:
- Use generic iounmap/ioremap implementations
- Redesign reset logic with sysreset features
- Use watchdog and gpio over DM
- Remove unused macros and fix some checkpatch issues
- Fix timer initialization not to be called twice

serial:
- zynq - Use platdata intead of priv data

sysreset:
- Add support for manual relocation in uclass
- Add gpio-restart driver
- Add microblaze soft reset driver

watchdog:
- Add support for aliases in uclass
- Add support for manual relocation in uclass
- Convert xilinx driver to DM
- cadence - update info in the driver and not stop wdt in probe

xilinx:
- Enable LED gpio for some targets with gpio-leds DT node
- Setup variables via Kconfig

zynq:
- Add support for watchdog aliases
- Add support for mini nand/nor configurations
- Wire FPGA initalization in SPL

zynqmp:
- Enable mass storage for zcu100
- Handle external pmufw files
- Add support for secure images
- Some Kconfig movements and alignments
- Add support for watchdog aliases
- Use subcommands style for platform command
- Add mmio_read/write platform commands
- DT updates
- Add support for mini qspi configuration

show more ...

arm: zynq: spl: fix FPGA initialization

commit 4aba5fb857c1 ("arm: zynq: Rework FPGA initialization")
moved FPGA initialization from board_init() to arch_early_init_r(),
which is not called as part

arm: zynq: spl: fix FPGA initialization

commit 4aba5fb857c1 ("arm: zynq: Rework FPGA initialization")
moved FPGA initialization from board_init() to arch_early_init_r(),
which is not called as part of the SPL

Fix this by calling arch_early_init_r() in the spl_board_init()
function, so the FPGA is correctly initialized

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07

microblaze:
- Align defconfig

zynq:
- Rework fpga initialization and cpuinfo handling

zynqmp

Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07

microblaze:
- Align defconfig

zynq:
- Rework fpga initialization and cpuinfo handling

zynqmp:
- Add ZynqMP R5 support
- Wire and enable watchdog on zcu100-revC
- Setup MMU map for DDR at run time
- Show board info based on DT and cleanup IDENT_STRING

zynqmp tools:
- Add read partition support
- Add initial support for Xilinx bif format for boot.bin generation

mmc:
- Fix get_timer usage on 64bit cpus
- Add support for SD3.0 UHS mode

nand-zynq:
- Add support for 16bit buswidth
- Use address cycles from onfi params

scsi:
- convert ceva sata to UCLASS_AHCI

timer:
- Add Cadence TTC for ZynqMP r5

watchdog:
- Minor cadence driver cleanup

show more ...

arm: zynq: Enable debug_uart_init in spl when enabled

In past this code was commented and was used for debug purpose.
But there is no reason not to enabled it based on macros.

Signed-off-by: Michal

arm: zynq: Enable debug_uart_init in spl when enabled

In past this code was commented and was used for debug purpose.
But there is no reason not to enabled it based on macros.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

spl: eMMC/SD: Provide one __weak spl_boot_mode() function

The goal of this patch is to clean up the code related to choosing SPL
MMC boot mode.

The spl_boot_mode() now is called only in spl_mmc_loa

spl: eMMC/SD: Provide one __weak spl_boot_mode() function

The goal of this patch is to clean up the code related to choosing SPL
MMC boot mode.

The spl_boot_mode() now is called only in spl_mmc_load_image() function,
which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled.

To achieve the goal, all per mach/arch implementations eligible for
unification has been replaced with one __weak implementation.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP)
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

show more ...

Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.03

- Several Kconfig fixes (also moving configs to defconfigs)
- Some DTS updates
- ZynqMP psu rework

Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.03

- Several Kconfig fixes (also moving configs to defconfigs)
- Some DTS updates
- ZynqMP psu rework based on Zynq concept
- Add low level initialization for zc770 and zcu102
- Add support for Zynq zc770 x16 nand configuration
- Add mini nand/emmc ZynqMP targets
- Some arasan nand changes

show more ...

arm: zynq: Update years in copyright to reflect latest changes

Updating year in zynq files. Also add missing Copyright to board.c.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.1

Zynq:
- Add support for Syzygy and cc108 boards
- Add support for mini u-boot configurations (c

Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.1

Zynq:
- Add support for Syzygy and cc108 boards
- Add support for mini u-boot configurations (cse)
- dts updates
- config/defconfig updates in connection to Kconfig changes
- Fix psu_init handling

ZynqMP:
- SPL fixes
- Remove slcr.c
- Fixing r5 startup sequence
- Add support for external pmufw
- Add support for new ZynqMP chips
- dts updates
- Add support for zcu102 rev1.0 board

Drivers:
- nand: Support external timing setting and board init
- ahci: Fix wording
- axi_emac: Wait for bit, non processor mode, readl/write conversion
- zynq_gem: Fix SGMII/PCS support

show more ...

arm: zynq: Move ps7_* to separate file

Extract ps7_* from spl code to prepare for extension.
And also return value.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

common: Pass the boot device into spl_boot_mode()

The SPL code already knows which boot device it calls the spl_boot_mode()
on, so pass that information into the function. This allows the code of
sp

common: Pass the boot device into spl_boot_mode()

The SPL code already knows which boot device it calls the spl_boot_mode()
on, so pass that information into the function. This allows the code of
spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets
board_boot_order() correctly alter the behavior of the boot process.

The later one is important, since in certain cases, it is desired that
spl_boot_device() return value be overriden using board_boot_order().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[add newly introduced zynq variant]
Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: Call ps7_post_config() for SPL

If ps7_post_config() is defined call it. It is enabling for example
level shifters for PL bitstreams.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM: zynq: Add support for SPL_LOAD_FIT

Enable minimal function to be able to compile SPL_LOAD_FIT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge git://git.denx.de/u-boot

arm: zynq: Support the debug UART

Add support for the debug UART to assist with early debugging. Enable it
for Zybo as an example.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Micha

arm: zynq: Support the debug UART

Add support for the debug UART to assist with early debugging. Enable it
for Zybo as an example.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

arm: zynq: Drop unnecessary code in SPL board_init_f()

Move to the new way of starting up SPL. Clearing of BSS and calling
board_init_r() is now handled by crt0.S.

Also tidy up the header include o

arm: zynq: Drop unnecessary code in SPL board_init_f()

Move to the new way of starting up SPL. Clearing of BSS and calling
board_init_r() is now handled by crt0.S.

Also tidy up the header include order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

zynq: Move SPL console init out of board_init_f()

We should not init the console this early since it precludes using driver
model for the UART, since it is not set up at the start of board_init_f().

zynq: Move SPL console init out of board_init_f()

We should not init the console this early since it precludes using driver
model for the UART, since it is not set up at the start of board_init_f().
See the README for more information. The debug UART does not have this
restriction. If we want to do early init with the console on it can be done
in spl_board_init().

Move the preloader_console_init() call from board_init_f() to board_init_r().

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x

Due to licensing issues, the files ps7_init.c/h are not able to be
distributed with U-Boot source code. Recent Xilinx tools also
pro

ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x

Due to licensing issues, the files ps7_init.c/h are not able to be
distributed with U-Boot source code. Recent Xilinx tools also
provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot
license.

Prior to this commit, we had to copy ps7_init files into
board/xilinx/zynq/ before the compile.

To be more user-friendly, let's include ps7_init_gpl.c/h for
Zedboard, MicroZed, ZC702, ZC706.

These init code have been taken from the hwplatform_templates
directory of Xilinx SDK 2014.4.

You can still use customized ps7_init_gpl.c/h by enabling
CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them
is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq
is still supported for backward compatibility. The latter emits
a warning message to prompt users to gradually switch to the new
directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze