SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.05-rc2

- Various DT changes and sync with mainline kernel
- Various defconfig updates
- Add SPL i

Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.05-rc2

- Various DT changes and sync with mainline kernel
- Various defconfig updates
- Add SPL init for zcu102 revA
- Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
and zc1751-dc3
- Net fixes - xlnx,phy-type
- 64bit axi ethernet support
- arasan: Fix nand write issue
- fpga fixes
- Maintainer file updates

show more ...

arm: zynq: Handle ENXIO error return value properly

zynq_clk_get_rate() is also returning ENXIO which is not handled now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'xilinx-for-v2017.05' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.05

- Move to DM clk driver
- Add clk support for zynq_sdhci

zynq: Move zynq to clock framework

Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.

Signed-off-by: Stefan Herbrechtsmeier <stefan.h

zynq: Move zynq to clock framework

Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynq: Remove zynq_clk_get_name function

The zynq_clk_get_name function is only used once inside the clock
driver. Replace the function call with the one-line code.

Signed-off-by: Stefan Herbrechtsm

zynq: Remove zynq_clk_get_name function

The zynq_clk_get_name function is only used once inside the clock
driver. Replace the function call with the one-line code.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynq: Move static clock names into separate array

The clock names are static and correspond to the clock id. Separate
them from the dynamic filled clock array.

Signed-off-by: Stefan Herbrechtsmeier

zynq: Move static clock names into separate array

The clock names are static and correspond to the clock id. Separate
them from the dynamic filled clock array.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge git://git.denx.de/u-boot-dm

clk: convert API to match reset/mailbox style

The following changes are made to the clock API:
* The concept of "clocks" and "peripheral clocks" are unified; each clock
provider now implements a s

clk: convert API to match reset/mailbox style

The following changes are made to the clock API:
* The concept of "clocks" and "peripheral clocks" are unified; each clock
provider now implements a single set of clocks. This provides a simpler
conceptual interface to clients, and better aligns with device tree
clock bindings.
* Clocks are now identified with a single "struct clk", rather than
requiring clients to store the clock provider device and clock identity
values separately. For simple clock consumers, this isolates clients
from internal details of the clock API.
* clk.h is split so it only contains the client/consumer API, whereas
clk-uclass.h contains the provider API. This aligns with the recently
added reset and mailbox APIs.
* clk_ops .of_xlate(), .request(), and .free() are added so providers
can customize these operations if needed. This also aligns with the
recently added reset and mailbox APIs.
* clk_disable() is added.
* All users of the current clock APIs are updated.
* Sandbox clock tests are updated to exercise clock lookup via DT, and
clock enable/disable.
* rkclk_get_clk() is removed and replaced with standard APIs.

Buildman shows no clock-related errors for any board for which buildman
can download a toolchain.

test/py passes for sandbox (which invokes the dm clk test amongst
others).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

zynq: Rename struct clk_ops to zynq_clk_ops

Since we want clk_ops to be used in U-Boot as a whole, rename the Zynq
version until it can be converted to driver model.

Signed-off-by: Simon Glass <sjg

zynq: Rename struct clk_ops to zynq_clk_ops

Since we want clk_ops to be used in U-Boot as a whole, rename the Zynq
version until it can be converted to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: move SoC sources to mach-zynq

Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.si

ARM: zynq: move SoC sources to mach-zynq

Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...