SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

arm: socfpga: scan: Add code to get FPGA ID

Add code to get the FPGA type for Altera's SoCFPGA family of FPGA. The code
uses the scan manager to send jtag pulses that will return the FPGA ID.

Signe

arm: socfpga: scan: Add code to get FPGA ID

Add code to get the FPGA type for Altera's SoCFPGA family of FPGA. The code
uses the scan manager to send jtag pulses that will return the FPGA ID.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

arm: socfpga: scan: Factor out IO chain programming

Factor out the code which sends JTAG instruction followed by data
into separate function to tidy the code up a little.

Signed-off-by: Marek Vasut

arm: socfpga: scan: Factor out IO chain programming

Factor out the code which sends JTAG instruction followed by data
into separate function to tidy the code up a little.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

arm: socfpga: scan: Clean up horrible macros

Clean up the horrible macros present in the scan_manager.h . Firstly,
the function scan_mgr_io_scan_chain_prg() is static, yet all the macros
are used on

arm: socfpga: scan: Clean up horrible macros

Clean up the horrible macros present in the scan_manager.h . Firstly,
the function scan_mgr_io_scan_chain_prg() is static, yet all the macros
are used only within it, thus there is no point in having them in the
header file. Moreover, the macros are just making the code much less
readable, so remove them instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

arm: socfpga: scan: Introduce generic JTAG accessor

Introduce generic function for accessing the JTAG scan chains in the
SCC manager. Make use of this function throughout the SCC manager to
replace

arm: socfpga: scan: Introduce generic JTAG accessor

Introduce generic function for accessing the JTAG scan chains in the
SCC manager. Make use of this function throughout the SCC manager to
replace the ad-hoc writes to registers and make the code less cryptic.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

arm: socfpga: scan: Clean up scan_chain_engine_is_idle()

Rework this function so it's clear that it is only polling for certain
bits to be cleared. Add kerneldoc. Fix it's return value to be either

arm: socfpga: scan: Clean up scan_chain_engine_is_idle()

Rework this function so it's clear that it is only polling for certain
bits to be cleared. Add kerneldoc. Fix it's return value to be either
0 on success and -ETIMEDOUT on error and propagate this through the
scan manager code.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

arm: socfpga: scan: Zap iocsr_scan_chain*_table()

Introduce accessor iocsr_get_config_table() for retrieving IOCSR config
tables. This patch is again trimming down the namespace polution.

The IOCSR

arm: socfpga: scan: Zap iocsr_scan_chain*_table()

Introduce accessor iocsr_get_config_table() for retrieving IOCSR config
tables. This patch is again trimming down the namespace polution.

The IOCSR config tables are used only by scan manager, they are generated
by qts and are board specific. Before this patch, the approach to use
these tables in scan manager was to define an extern variable to silence
the compiler and compile board-specific iocsr_config.c into U-Boot which
defined those extern variables. Furthermore, since these are tables and
the scan manager needs to know the size of those tables, iocsr_config.h
is included build-wide.

This patch wraps all this into a single accessor which takes the scan
chain ID and returns pointer to the table and it's size. All this is
wrapped in wrap_iocsr_config.c board-specific file. The file includes
the iocsr_config.c (!) to access the original tables and transitively
iocsr_config.h . It is thus no longer necessary to include iocsr_config.h
build-wide and the namespace polution is trimmed some more.

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...

arm: socfpga: scan: Zap redundant params in scan_mgr_io_scan_chain_prg()

It is sufficient to pass in the scan chain ID into the function to determine
the remaining two parameters, so drop those para

arm: socfpga: scan: Zap redundant params in scan_mgr_io_scan_chain_prg()

It is sufficient to pass in the scan chain ID into the function to determine
the remaining two parameters, so drop those params and determine them locally
in the function. The big-ish switch in the function is temporary and will be
replaced by a proper function call in subsequent patch.

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...

arm: socfpga: scan: Staticize scan_mgr_io_scan_chain_prg()

This function is never used outside of scan_manager.c , so make it static.
Zap the prototype in scan_manager.h and move the documentation a

arm: socfpga: scan: Staticize scan_mgr_io_scan_chain_prg()

This function is never used outside of scan_manager.c , so make it static.
Zap the prototype in scan_manager.h and move the documentation above the
function. Make the documentation kerneldoc compliant.

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...

ARM: socfpga: move SoC sources to mach-socfpga

Our recent trend is to collect SoC files into arch/arm/mach-(SOC).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>