arm: aspeed: ast2600: fix wdt reboot when booting from emmc

Change-Id: Ic392c560d6391abe083ce5b8b7123dad01d7012d

ARM: Aspeed: Revise RAM info print

Adding ECC size info and support board_ram_info for ast2500

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I74e7be5adf9759d07850bfea2189509d0fdb

ARM: Aspeed: Revise RAM info print

Adding ECC size info and support board_ram_info for ast2500

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I74e7be5adf9759d07850bfea2189509d0fdb3b43

show more ...

aspeed: ast2600: Disable address remapping

For AST2600 A1, the address remapping should be
disabled after secure boot execution. Thus when
soft reset occurs, the secure boot engine can
once again fe

aspeed: ast2600: Disable address remapping

For AST2600 A1, the address remapping should be
disabled after secure boot execution. Thus when
soft reset occurs, the secure boot engine can
once again fetch the image from original address.

Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>

show more ...

Revert "aspeed: Add early init for KCS and Snoop"

This reverts commit 9f8a8eaed7bdf1ed9f2c3fdd9e5cf4dde411c11a.
The issue will be fixed by HW change.

Revert "aspeed: Add eSPI early init"

This reverts commit 0471eaca68d6923e92ed2e7dc6f36751efb92e3f.
The issue will be fixed by HW change.

Merge branch 'feature/espi_early_init' into aspeed-dev-v2019.04

aspeed: Add eSPI early init

The Host PCH booting could fail because of that the
BMC-side eSPI channels are not ready. This patch adds
early initialization to the eSPI controller. Thus the
eSPI chann

aspeed: Add eSPI early init

The Host PCH booting could fail because of that the
BMC-side eSPI channels are not ready. This patch adds
early initialization to the eSPI controller. Thus the
eSPI channel can becomes ready at the early stage.

Note that this merely allows PCH to continue its booting.
The eSPI is not fully functional until the BMC kernel
booting is done.

Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>

show more ...

Merge branch 'bugfix/lpc_early_init' into aspeed-dev-v2019.04

aspeed: Add early init for KCS and Snoop

When the eSPI-LPC bridge HW encounters an LPC I/O port
decoding error, the LPC bus will be kept in busy state.
And controllers behind the bridge cannot be en

aspeed: Add early init for KCS and Snoop

When the eSPI-LPC bridge HW encounters an LPC I/O port
decoding error, the LPC bus will be kept in busy state.
And controllers behind the bridge cannot be enabled
when the LPC bus is busy.

This patch enables the Snoop(80h) and the KCS(CA2h)
controllers at early stage to avoid being not able
to be activated due to the issue above.

show more ...

Merge branch 'dev/ast2620_vga' into aspeed-dev-v2019.04

don't reserve VGA memory if efuse bit is set

Merge branch 'boot/emmc' into aspeed-dev-v2019.04

boot: emmc: Boot from eMMC feature early porting

- Add eMMC deive node in SPL device tree.
- Add a new defconfig for emmc boot.
- Set related pinctrl and clock parameter.

Merge branch 'aspeed-dev-v2019.04' of ssh://192.168.10.30:7999/bmc/u-boot into aspeed-dev-v2019.04

Merge branch 'feature/ddr_info' into aspeed-dev-v2019.04

move borad_add_ram_info to borad_common.c

Merge branch 'feature/slt_board' into aspeed-dev-v2019.04

ARM: Aspeed: Refactor board common initialization

1. make ast2500/ast2600 common board-initialization
a weak function to support override
2. rename SCU information printing function