Merge git://git.denx.de/u-boot-tegra

apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

Merge git://git.denx.de/u-boot-dm

tegra: fdt: Ensure that the console UART is enabled

Many tegra boards have the console UART node disabled. With livetree this
prevents serial from working since it does not 'force' the console to be

tegra: fdt: Ensure that the console UART is enabled

Many tegra boards have the console UART node disabled. With livetree this
prevents serial from working since it does not 'force' the console to be
bound. Updates the affected boards to fix this error.

The boards were checked with:

for b in $(grep tegra boards.cfg |grep -v integrator | \
awk '{print $7}' | sort); do
echo $b;
fdtgrep -c nvidia,tegra20-uart b/$b/u-boot.dtb |grep okay;
done

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-tegra

ARM: tegra: pull Tegra30 SoC DT from Linux v4.7

The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migr

ARM: tegra: pull Tegra30 SoC DT from Linux v4.7

The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migrate to the standard clock and reset APIs in the future.

Main changes:
* Modification of PCIe memory region addresses. The HW memory layout is
programmable, so this should work fine, and Beaver PCIe was tested
without issue.
* Removal of pcie_xclk from the PCIe node and clock binding header. This
clock doesn't exist and isn't used; only a reset with this ID exists.
* Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use
DMA so isn't affected.
* Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all
information required by U-Boot, so U-Boot is not affected.
* Changed the phy_type value for the second USB port. This required board
DTs to be updated to keep the same configuration.
* Boards need to define the clk32k_in clock that feeds the Tegra PMC.
* Addition of tegra30-mc.h since tegra30.dtsi now includes it.
* Conversion of many magic numbers to named defines.
* Addition of many nodes not used by U-Boot.
* Node sort order fixes.

Remaining deltas relative to the Linux DT:
* None.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

mmc: tegra: use correct alias for SDHCI/MMC nodes

The Tegra MMC driver currently honors "sdhci" entries in /aliases. The
MMC core however uses "mmc" entries in /aliases. This difference will be
rele

mmc: tegra: use correct alias for SDHCI/MMC nodes

The Tegra MMC driver currently honors "sdhci" entries in /aliases. The
MMC core however uses "mmc" entries in /aliases. This difference will be
relevant once the Tegra MMC driver is converted to DM, and the MMC core
handles alias lookups. To avoid issues during that conversion, fix the
Tegra MMC driver and all Tegra DTs to use the same alias name as the MMC
core does.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

apalis/colibri_t30: fix usb dm regression

Unfortunately currently both Apalis T30 as well as Colibri T30 crash
upon starting USB host support. This is due to the following patch not
having taken int

apalis/colibri_t30: fix usb dm regression

Unfortunately currently both Apalis T30 as well as Colibri T30 crash
upon starting USB host support. This is due to the following patch not
having taken into account that our T30 device trees were defaulting to
peripheral only mode instead of otg:

commit ddb9a502d18008e845d5a8fa03ec48630fa77fb7
dm: usb: tegra: Move most of init/uninit into a function

This patch fixes this by defaulting to otg now.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

apalis/colibri_t20/30: clean-up

Various clean-ups either in comments, order or spacing without any
functional impact:
- Add some comments in the device trees resp. reorder some parameters
for cons

apalis/colibri_t20/30: clean-up

Various clean-ups either in comments, order or spacing without any
functional impact:
- Add some comments in the device trees resp. reorder some parameters
for consistency across all our modules.
- Sort some include files alphabetically (while leaving common.h on
top of course).
- Streamline some comments in the configuration files and fix the
spacing from using spaces to tabs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-tegra

Conflicts:
README

Signed-off-by: Tom Rini <trini@konsulko.com>

apalis/colibri_t30: fix MMC/SD card detect GPIOs

This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken
by the following commit:

2b2b50bc8748 "dm: tegra: dts: Use TEGRA_GPIO() macr

apalis/colibri_t30: fix MMC/SD card detect GPIOs

This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken
by the following commit:

2b2b50bc8748 "dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs"

While at it also re-add the comments describing which particular
Apalis/Colibri pins those GPIOs are on.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'master' of git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-dm

dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs

This new method is much easier and matches the kernel.

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot-tegra

ARM: tegra: colibri_t30: comment style fix

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

Merge branch 'master' of git://git.denx.de/u-boot-tegra

Merge git://git.denx.de/u-boot-dm

dm: tegra: dts: Add aliases for spi on tegra30 boards

All boards with a SPI interface have a suitable spi alias except the tegra30
boards. Add these missing aliases.

Signed-off-by: Simon Glass <sjg

dm: tegra: dts: Add aliases for spi on tegra30 boards

All boards with a SPI interface have a suitable spi alias except the tegra30
boards. Add these missing aliases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

show more ...

tegra: dts: colibri_t30 add serial port details

Add missing chosen stdout-path device tree node. This got missed by
commit

c369139234c03b1494394d12cd27009f47aa6606
tegra: dts: Add serial port detai

tegra: dts: colibri_t30 add serial port details

Add missing chosen stdout-path device tree node. This got missed by
commit

c369139234c03b1494394d12cd27009f47aa6606
tegra: dts: Add serial port details

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-tegra

ARM: tegra: add Colibri T30 board support

This adds board support for the Toradex Colibri T30 module.

Working functions:
- SD card boot
- eMMC environment and boot
- USB host/USB client (on the dua

ARM: tegra: add Colibri T30 board support

This adds board support for the Toradex Colibri T30 module.

Working functions:
- SD card boot
- eMMC environment and boot
- USB host/USB client (on the dual role port)
- Network (via ASIX USB)

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...