SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-rockchip

rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality

Give the mac controller the correct tx-delay and rx-delay value
for the rgmii mode transmission. If they are not matc

rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality

Give the mac controller the correct tx-delay and rx-delay value
for the rgmii mode transmission. If they are not matched, there
would be Ethernet packets lost, the net feature may not work.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

rockchip: dts: rk3399-evb: support boot from sd-card

Enable sdmmc node in SPL and add it to boot order.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.toms

rockchip: dts: rk3399-evb: support boot from sd-card

Enable sdmmc node in SPL and add it to boot order.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed commit tags:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge git://git.denx.de/u-boot-rockchip

rockchip: dts: Enable SARADC for rk3399-evb

Enable the SARADC for download key pressed detect.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma

rockchip: dts: Enable SARADC for rk3399-evb

Enable the SARADC for download key pressed detect.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

rockchip: dts: rk3399-evb: remove redundant gmac node

There are two same gmac node, remove one.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Rev

rockchip: dts: rk3399-evb: remove redundant gmac node

There are two same gmac node, remove one.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

rockchip: dts: rk3399: control vbus of typec by fixed regulator

Add fixed regulator for the port of typec0 and typec1 to control vbus
instead of gpio.

Signed-off-by: Meng Dongyang <daniel.meng@rock

rockchip: dts: rk3399: control vbus of typec by fixed regulator

Add fixed regulator for the port of typec0 and typec1 to control vbus
instead of gpio.

Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge git://git.denx.de/u-boot-rockchip

This adds a new firefly-rk3399 board, MIPI support for rk3399 and
rk3288, rk818 pmic support, mkimage improvements for rockchip and a few
other things.

rockchip: dts: Add mipi dsi support for rk3399

Add dts config for mipi display, include vop, mipi controller, panel, backlight
. And Enable rk808 for lcd_3v3 in another patch.

Signed-off-by: Eric G

rockchip: dts: Add mipi dsi support for rk3399

Add dts config for mipi display, include vop, mipi controller, panel, backlight
. And Enable rk808 for lcd_3v3 in another patch.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

rockchip: dts: evb-rk3399: add gmac support

Enable gmac for evb-rk3399.

Change-Id: I85e35667e08e22e38577e63eb0e65731fc9c69b6
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: dts: evb-rk3399: correct pwm3 polarity

The pwm3 on evb-rk3399 is used for pwm regulator, need to invert
the polarity to make it work correctly.

Signed-off-by: Kever Yang <kever.yang@rock-

rockchip: dts: evb-rk3399: correct pwm3 polarity

The pwm3 on evb-rk3399 is used for pwm regulator, need to invert
the polarity to make it work correctly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge git://git.denx.de/u-boot-rockchip

rockchip: pmic: Enable RK808 for rk3399 evb

For using mipi display, we need to enable lcd3v3
which supplied by rk808,so enable rk808 first.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-b

rockchip: pmic: Enable RK808 for rk3399 evb

For using mipi display, we need to enable lcd3v3
which supplied by rk808,so enable rk808 first.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

dts: rk3399: move rockchip, vbus-gpio properties into board-specific files

The (shared) rk3399.dtsi had defined the 'rockchip,vbus-gpio'
properties for each USB 3.0 controller.

As the GPIO usage wi

dts: rk3399: move rockchip, vbus-gpio properties into board-specific files

The (shared) rk3399.dtsi had defined the 'rockchip,vbus-gpio'
properties for each USB 3.0 controller.

As the GPIO usage will vary (e.g. one of those GPIOs shuts down one of
the regulators on the RK3399-Q7) between boards, we move this from the
shared dtsi into the device tree file for the EVB board which these
GPIO definitions match.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-rockchip

This includes support for rk3188 from Heiko Stübner and and rk3328 from
Kever Yang. Also included is SPL support for rk3399 and a fix for
rk3288 to get it bo

Merge git://git.denx.de/u-boot-rockchip

This includes support for rk3188 from Heiko Stübner and and rk3328 from
Kever Yang. Also included is SPL support for rk3399 and a fix for
rk3288 to get it booting again (spl_early_init()).

show more ...

rockchip: dts: rk3399: update for spl require driver

Add syscon and dmc node, and 'u-boot,dm-pre-reloc' option for
required driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by

rockchip: dts: rk3399: update for spl require driver

Add syscon and dmc node, and 'u-boot,dm-pre-reloc' option for
required driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Added rockchip tag:
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-rockchip

dts: evb-rk3399: add init voltage node for vdd-center

Add a regulator-init-microvolt for vdd_center regulator
so that we can get a init value for driver probe.
Not like pmic regulator, the PWM regul

dts: evb-rk3399: add init voltage node for vdd-center

Add a regulator-init-microvolt for vdd_center regulator
so that we can get a init value for driver probe.
Not like pmic regulator, the PWM regulator do not have a
known default output value, so we would like to init the
regulator when driver probe.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-rockchip

dts: rk3399-evb: add regulator-fixed for usb host vbus

rk3399 evb using one gpio to enable 5V output for both USB 2.0
host port, let's use fixed regulator for them.

Signed-off-by: Kever Yang <kever

dts: rk3399-evb: add regulator-fixed for usb host vbus

rk3399 evb using one gpio to enable 5V output for both USB 2.0
host port, let's use fixed regulator for them.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...