History log of /openbmc/u-boot/arch/arm/dts/rk3368.dtsi (Results 1 – 9 of 9)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07, v2018.03, v2018.01, v2017.11
# c1b62ba9 14-Aug-2017 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-rockchip


# bc824cc0 28-Jul-2017 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

dts: rk3368: make timer0 accessible for SPL and TPL

To use it with the DM timer driver in SPL and TPL, timer0 needs to be
marked as pre-reloc.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobr

dts: rk3368: make timer0 accessible for SPL and TPL

To use it with the DM timer driver in SPL and TPL, timer0 needs to be
marked as pre-reloc.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...


# 4d02d206 12-Jul-2017 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

rockchip: board: lion-rk3368: add support for the RK3368-uQ7

The RK3368-uQ7 (codenamed 'Lion') is a micro-Qseven (40mm x 70mm,
MXM-230 edge connector compatible with the Qseven specification)
form-f

rockchip: board: lion-rk3368: add support for the RK3368-uQ7

The RK3368-uQ7 (codenamed 'Lion') is a micro-Qseven (40mm x 70mm,
MXM-230 edge connector compatible with the Qseven specification)
form-factor system-on-module based on the octo-core Rockchip RK3368.
It is designed, supported and manufactured by Theobroma Systems.

It provides the following features:
- 8x Cortex-A53 (in 2 clusters of 4 cores each)
- (on-module) up to 4GB of DDR3 memory
- (on-module) SPI-NOR flash
- (on-module) eMMC
- Gigabit Ethernet (with an on-module KSZ9031 PHY)
- USB
- HDMI
- MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group)
- various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...)

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...


# 1ac973a1 22-Jun-2017 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

rockchip: rk3368: dts: add DMC node in rk3368.dtsi

For full SPL support, including DRAM initialisation, we need a few
nodes from the DTS: this commit adds the DMC (DRAM controller) node,
the service

rockchip: rk3368: dts: add DMC node in rk3368.dtsi

For full SPL support, including DRAM initialisation, we need a few
nodes from the DTS: this commit adds the DMC (DRAM controller) node,
the service_msch (memory scheduler) node and marks GRF, PMUGRF and CRU
as 'u-boot,dm-pre-reloc'. In addition to this, we also include the
dt-binding for the DMC to allow DTS files including this DTSI to refer
to the symbolic constants for the DDR3 bin and for the
memory-schedule.

Note that the DMC contains both the memory regions for the
(Designware) protocol controller as well as the DDR PHY.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...


# 8f362dbb 28-Jul-2017 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

rockchip: rk3368: dts: add sgrf node

We will to drop device security temporarily (until the ATF initialises
it fully) from the TPL/SPL stage: this requires access to some
registers in the SGRF.

Thi

rockchip: rk3368: dts: add sgrf node

We will to drop device security temporarily (until the ATF initialises
it fully) from the TPL/SPL stage: this requires access to some
registers in the SGRF.

This adds the sgrf node to the rk3368.dtsi, so we can then bind a
syscon device onto it and access its memory ranges.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...


# d43ef73b 11-Jul-2017 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-rockchip


# c541a7a1 23-Jun-2017 Kever Yang <kever.yang@rock-chips.com>

rockchip: dts: rk3368: add dmc node

Add dmc node to enable sdram driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>


# 156d64fa 08-Jun-2017 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-rockchip

Here is additional rk3368 and rk3399 support, rv1108 support,
refactoring HDMI video (brought in from Anatolij's tree to resolve
conflicts), some mkimage fixe

Merge git://git.denx.de/u-boot-rockchip

Here is additional rk3368 and rk3399 support, rv1108 support,
refactoring HDMI video (brought in from Anatolij's tree to resolve
conflicts), some mkimage fixes and a few other things.

show more ...


# 37a0c600 15-May-2017 Andreas Färber <afaerber@suse.de>

rockchip: rk3368: Add core start-up code for RK3368

The RK3368 is an octa-core Cortex-A53 SoC from Rockchip.
This adds basic support to chain-load U-Boot from Rockchip's
miniloader.

Signed-off-by:

rockchip: rk3368: Add core start-up code for RK3368

The RK3368 is an octa-core Cortex-A53 SoC from Rockchip.
This adds basic support to chain-load U-Boot from Rockchip's
miniloader.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...