| #
b097ba37 |
| 25-Apr-2019 |
Laszlo Ersek <lersek@redhat.com> |
tests/uefi-test-tools: report the SMBIOS entry point structures
On UEFI systems, the SMBIOS entry point (a.k.a. anchor) structures are
found similarly to the ACPI RSD PTR table(s): by scanning the
C
tests/uefi-test-tools: report the SMBIOS entry point structures
On UEFI systems, the SMBIOS entry point (a.k.a. anchor) structures are
found similarly to the ACPI RSD PTR table(s): by scanning the
ConfigurationTable array in the EFI system table for well-known GUIDs.
Locate the SMBIOS 2.1 (32-bit) and 3.0 (64-bit) anchors in the
BiosTablesTest UEFI application, and report the addresses in new fields
appended to the BIOS_TABLES_TEST structure.
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Launchpad: https://bugs.launchpad.net/qemu/+bug/1821884
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
show more ...
|
| #
1d31f187 |
| 04-Mar-2019 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux ho
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
| #
09a274d8 |
| 04-Feb-2019 |
Laszlo Ersek <lersek@redhat.com> |
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
The "bios-tables-test" program in QEMU's test suite locates the RSD PTR
ACPI table in guest RAM, and (chasing pointers to other AC
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
The "bios-tables-test" program in QEMU's test suite locates the RSD PTR
ACPI table in guest RAM, and (chasing pointers to other ACPI tables)
performs various sanity checks on the QEMU-generated and
firmware-installed tables.
Currently this set of test cases doesn't work with UEFI guests. The ACPI
spec defines distinct methods for OSPM to locate the RSD PTR on
traditional BIOS vs. UEFI platforms, and the UEFI method is more difficult
to implement from the hypervisor side with just raw guest memory access.
Add a UEFI application (to be booted in the UEFI guest) that populates a
small, MB-aligned structure in guest RAM. The structure begins with a
signature GUID. The hypervisor should loop over all MB-aligned pages in
guest RAM until one matches the signature GUID at offset 0, at which point
the hypervisor can fetch the RSDP address field(s) from the structure.
QEMU's test logic currently spins on a pre-determined guest address, until
that address assumes a magic value. The method described in this patch is
conceptually the same ("busy loop until match is found"), except there is
no hard-coded address. This plays a lot more nicely with UEFI guest
firmware (we'll be able to use the normal page allocation UEFI service).
Given the size of EFI_GUID (16 bytes -- 128 bits), mismatches should be
astronomically unlikely. In addition, given the typical guest RAM size for
such tests (128 MB), there are 128 locations to check in one iteration of
the "outer" loop, which shouldn't introduce an intolerable delay after the
guest stores the RSDP address(es), and then the GUID.
The GUID that the hypervisor should search for is
AB87A6B1-2034-BDA0-71BD-375007757785
Expressed as a byte array:
{
0xb1, 0xa6, 0x87, 0xab,
0x34, 0x20,
0xa0, 0xbd,
0x71, 0xbd, 0x37, 0x50, 0x07, 0x75, 0x77, 0x85
}
Note that in the patch, we define "gBiosTablesTestGuid" with all bits
inverted. This is a simple method to prevent the UEFI binary, which
incorporates "gBiosTablesTestGuid", from matching the actual GUID in guest
RAM.
The UEFI application is written against the edk2 framework, which was
introduced earlier as a git submodule. The next patch will provide build
scripts for maintainers.
The source code follows the edk2 coding style, and is licensed under the
2-clause BSDL (in case someone would like to include UefiTestToolsPkg
content in a different edk2 platform).
The "UefiTestToolsPkg.dsc" platform description file resolves the used
edk2 library classes to instances (= library implementations) such that
the UEFI binaries inherit no platform dependencies. They are expected to
run on any system that conforms to the UEFI-2.3.1 spec (which was released
in 2012). The arch-specific build options are carried over from edk2's
ArmVirtPkg and OvmfPkg platforms.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190204160325.4914-4-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
show more ...
|