Merge tag 'pull-block-2022-03-22' of https://gitlab.com/hreitz/qemu into staging

Block patches for 7.0-rc1:
- iotest fixes:
- Fix some iotests for riscv targets
- Use GNU sed in more places wher

Merge tag 'pull-block-2022-03-22' of https://gitlab.com/hreitz/qemu into staging

Block patches for 7.0-rc1:
- iotest fixes:
- Fix some iotests for riscv targets
- Use GNU sed in more places where required
- Meson-related fixes (i.e. to print errors when they occur)
- Have qemu-img calls (from Python tests) generally raise nicely
formattable exceptions on errors
- Fix iotest 207
- Allow RBD images to be growable by writing zeroes past the end of
file, fixing qcow2 on rbd

# gpg: Signature made Tue 22 Mar 2022 11:51:10 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF

* tag 'pull-block-2022-03-22' of https://gitlab.com/hreitz/qemu: (25 commits)
iotests/207: Filter host fingerprint
iotests.py: Filters for VM.run_job()
iotests: make qemu_img_log and img_info_log raise on error
iotests: remove qemu_img_pipe_and_status()
iotests: replace qemu_img_log('create', ...) calls
iotests: use qemu_img() in has_working_luks()
iotests: remove remaining calls to qemu_img_pipe()
iotests/149: Remove qemu_img_pipe() call
iotests: replace unchecked calls to qemu_img_pipe()
iotests: change supports_quorum to use qemu_img
iotests: add qemu_img_map() function
iotests/remove-bitmap-from-backing: use qemu_img_info()
iotests: add qemu_img_info()
iotests: use qemu_img_json() when applicable
iotests: add qemu_img_json()
iotests: fortify compare_images() against crashes
iotests: make qemu_img raise on non-zero rc by default
iotests: Remove explicit checks for qemu_img() == 0
python/utils: add VerboseProcessError
python/utils: add add_visual_margin() text decoration utility
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests/207: Filter host fingerprint

Commit e3296cc796aeaf319f3ed4e064ec309baf5e4da4 made the ssh block
driver's error message for fingerprint mismatches more verbose, so it
now prints the actual ho

iotests/207: Filter host fingerprint

Commit e3296cc796aeaf319f3ed4e064ec309baf5e4da4 made the ssh block
driver's error message for fingerprint mismatches more verbose, so it
now prints the actual host key fingerprint and the key type.

iotest 207 tests such errors, but was not amended to filter that
fingerprint (which is host-specific), so do it now. Filter the key
type, too, because I guess this too can differ depending on the host
configuration.

Fixes: e3296cc796aeaf319f3ed4e064ec309baf5e4da4
("block: print the server key type and fingerprint on failure")
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-3-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Supporting changing 'file' in x-blockdev-reopen
- ssh: add support for sha256 host key fingerprints

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Supporting changing 'file' in x-blockdev-reopen
- ssh: add support for sha256 host key fingerprints
- vhost-user-blk: Implement reconnection during realize
- introduce QEMU_AUTO_VFREE
- Don't require password of encrypted backing file for image creation
- Code cleanups

# gpg: Signature made Wed 30 Jun 2021 17:00:55 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (24 commits)
vhost-user-blk: Implement reconnection during realize
vhost-user-blk: Factor out vhost_user_blk_realize_connect()
vhost: Distinguish errors in vhost_dev_get_config()
vhost-user-blk: Add Error parameter to vhost_user_blk_start()
vhost: Return 0/-errno in vhost_dev_init()
vhost: Distinguish errors in vhost_backend_init()
vhost: Add Error parameter to vhost_dev_init()
block/ssh: add support for sha256 host key fingerprints
block/commit: use QEMU_AUTO_VFREE
introduce QEMU_AUTO_VFREE
iotests: Test replacing files with x-blockdev-reopen
block: Allow changing bs->file on reopen
block: BDRVReopenState: drop replace_backing_bs field
block: move supports_backing check to bdrv_set_file_or_backing_noperm()
block: bdrv_reopen_parse_backing(): simplify handling implicit filters
block: bdrv_reopen_parse_backing(): don't check frozen child
block: bdrv_reopen_parse_backing(): don't check aio context
block: introduce bdrv_set_file_or_backing_noperm()
block: introduce bdrv_remove_file_or_backing_child()
block: comment graph-modifying function not updating permissions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

block/ssh: add support for sha256 host key fingerprints

Currently the SSH block driver supports MD5 and SHA1 for host key
fingerprints. This is a cryptographically sensitive operation and
so these h

block/ssh: add support for sha256 host key fingerprints

Currently the SSH block driver supports MD5 and SHA1 for host key
fingerprints. This is a cryptographically sensitive operation and
so these hash algorithms are inadequate by modern standards. This
adds support for SHA256 which has been supported in libssh since
the 0.8.1 release.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210622115156.138458-1-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-06-24' into staging

Block patches:
- The SSH block driver now uses libssh instead of libssh2
- The VMDK block driver gets read-onl

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-06-24' into staging

Block patches:
- The SSH block driver now uses libssh instead of libssh2
- The VMDK block driver gets read-only support for the seSparse
subformat
- Various fixes

# gpg: Signature made Mon 24 Jun 2019 15:42:56 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2019-06-24:
iotests: Fix 205 for concurrent runs
ssh: switch from libssh2 to libssh
vmdk: Add read-only support for seSparse snapshots
vmdk: Reduce the max bound for L1 table size
vmdk: Fix comment regarding max l1_size coverage
iotest 134: test cluster-misaligned encrypted write
blockdev: enable non-root nodes for transaction drive-backup source
nvme: do not advertise support for unsupported arbitration mechanism

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

ssh: switch from libssh2 to libssh

Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for auth

ssh: switch from libssh2 to libssh

Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts

Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).

Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>

Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-05-07' into staging

Block patches:
- Fixes to qcow2's implementation of qemu-img check
- Our SSH driver now supports bdrv_refresh_

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-05-07' into staging

Block patches:
- Fixes to qcow2's implementation of qemu-img check
- Our SSH driver now supports bdrv_refresh_filename()
- Miscellaneous fixes

# gpg: Signature made Tue 07 May 2019 16:16:58 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2019-05-07:
iotests: Fix iotests 110 and 126
commit: Use bdrv_append() in commit_start()
block: Assert that drv->bdrv_child_perm is set in bdrv_child_perm()
block/ssh: Implement .bdrv_dirname()
block/ssh: Implement .bdrv_refresh_filename()
qcow2: discard bitmap when removed
qcow2-refcount: don't mask corruptions under internal errors
qcow2-refcount: check_refcounts_l2: don't count fixed cluster as allocated
qcow2-refcount: check_refcounts_l2: reduce ignored overlaps
qcow2-refcount: avoid eating RAM
qcow2-refcount: fix check_oflag_copied

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

block/ssh: Implement .bdrv_refresh_filename()

This requires some changes to keep iotests 104 and 207 working.

qemu-img info in 104 will now return a filename including the user name
and the port, w

block/ssh: Implement .bdrv_refresh_filename()

This requires some changes to keep iotests 104 and 207 working.

qemu-img info in 104 will now return a filename including the user name
and the port, which need to be filtered by adjusting REMOTE_TEST_DIR in
common.rc. This additional information has to be marked optional,
however (which is simple as REMOTE_TEST_DIR is a regex), because
otherwise 197 and 215 would fail: They use it (indirectly) to filter
qemu-img create output which contains a backing filename they have
passed to it -- which probably does not contain a user name or port
number.

The problem in 207 is a nice one to have: qemu-img info used to return
json:{} filenames, but with this patch it returns nice plain ones. We
now need to adjust the filtering to hide the user name (and port number
while we are at it). The simplest way to do this is to include both in
iotests.remote_filename() so that bdrv_refresh_filename() will not
change it, and then iotests.img_info_log() will filter it correctly
automatically.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190225190828.17726-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL
- vmdk: Set vmdk parent backing_format to vmdk
- qcow2: Preallocation fixes (especially for external data files)
- Add linear-buffer-based APIs (as wrappers around qiov-based ones)
- Various code cleanups and small corner case fixes

# gpg: Signature made Tue 30 Apr 2019 16:35:09 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (27 commits)
block/qed: add missed coroutine_fn markers
iotests: Check that images are in read-only mode after block-commit
commit: Make base read-only if there is an early failure
qemu-img: use buffer-based io
block/stream: use buffer-based io
block/commit: use buffer-based io
block/backup: use buffer-based io
block/parallels: use buffer-based io
block/qed: use buffer-based io
block/qcow: use buffer-based io
block/qcow2: use buffer-based io
block: introduce byte-based io helpers
qcow2: Fix error handling in the compression code
qcow2: Fix qcow2_make_empty() with external data file
qemu-img: Make create hint at protocol options
iotests: Perform the correct test in 082
qcow2: Fix full preallocation with external data file
qcow2: Add errp to preallocate_co()
qcow2: Avoid COW during metadata preallocation
qemu-img: Saner printing of large file sizes
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qemu-img: Saner printing of large file sizes

Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:

$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nb

qemu-img: Saner printing of large file sizes

Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:

$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
file format: raw
virtual size: -8388607T (9223372036854775296 bytes)
disk size: unavailable

But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).

Quite a few iotests need updates to expected output to match.

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'mreitz/tags/pull-block-2019-02-25' into queue-block

Block patches:
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qe

Merge remote-tracking branch 'mreitz/tags/pull-block-2019-02-25' into queue-block

Block patches:
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon Feb 25 15:13:43 2019 CET
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* mreitz/tags/pull-block-2019-02-25: (45 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

iotests.py: s/_/-/g on keys in qmp_log()

This follows what qmp() does, so the output will correspond to the
actual QMP command.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 201902101457

iotests.py: s/_/-/g on keys in qmp_log()

This follows what qmp() does, so the output will correspond to the
actual QMP command.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190210145736.1486-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

iotests: Fix 207 to use QMP filters for qmp_log

Fixes: 08fcd6111e1949f456e1b232ebeeb0cc17019a92
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 201

iotests: Fix 207 to use QMP filters for qmp_log

Fixes: 08fcd6111e1949f456e1b232ebeeb0cc17019a92
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python queue, 2018-10-30

* Makefile rule for running acceptance tests
(make check-acceptance) (Cleber Ro

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python queue, 2018-10-30

* Makefile rule for running acceptance tests
(make check-acceptance) (Cleber Rosa)
* Make iotests compatible with Python 3
(Max Reitz)
* device-crash-test whitelist update (Thomas Huth)
* Misc cleanups (Cleber Rosa)

# gpg: Signature made Wed 31 Oct 2018 00:28:39 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/python-next-pull-request:
scripts/qemu.py: use a more consistent docstring style
scripts/decodetree.py: fix reference to attributes
Travis support for the acceptance tests
Acceptance tests: add make rule for running them
Bootstrap Python venv for tests
iotests: Unify log outputs between Python 2 and 3
iotests: Modify imports for Python 3
iotests: 'new' module replacement in 169
iotests: Explicitly bequeath FDs in Python
iotests: Different iterator behavior in Python 3
iotests: Use // for Python integer division
iotests: Use Python byte strings where appropriate
iotests: Flush in iotests.py's QemuIoInteractive
iotests: Make nbd-fault-injector flush
scripts/device-crash-test: Remove devices that are not user_creatable anymore

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: Unify log outputs between Python 2 and 3

When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are

iotests: Unify log outputs between Python 2 and 3

When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.

We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.

This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Add blockdev-create job
- qcow2: Silence Coverity false positive

# gpg: Signature made Wed 30 May

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Add blockdev-create job
- qcow2: Silence Coverity false positive

# gpg: Signature made Wed 30 May 2018 16:55:31 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
block/create: Mark blockdev-create stable
qemu-iotests: Rewrite 213 for blockdev-create job
qemu-iotests: Rewrite 212 for blockdev-create job
qemu-iotests: Rewrite 211 for blockdev-create job
qemu-iotests: Rewrite 210 for blockdev-create job
qemu-iotests: Rewrite 207 for blockdev-create job
qemu-iotests: Rewrite 206 for blockdev-create job
qemu-iotests: iotests.py helper for non-file protocols
qemu-iotests: Add VM.run_job()
qemu-iotests: Add iotests.img_info_log()
qemu-iotests: Add VM.qmp_log()
qemu-iotests: Add VM.get_qmp_events_filtered()
block/create: Make x-blockdev-create a job
job: Add error message for failing jobs
vhdx: Fix vhdx_co_create() return value
vdi: Fix vdi_co_do_create() return value
qcow2: Fix Coverity warning when calculating the refcount cache size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

block/create: Mark blockdev-create stable

We're ready to declare the blockdev-create job stable. This renames the
corresponding QMP command from x-blockdev-create to blockdev-create.

Signed-off-by:

block/create: Mark blockdev-create stable

We're ready to declare the blockdev-create job stable. This renames the
corresponding QMP command from x-blockdev-create to blockdev-create.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>

show more ...

qemu-iotests: Rewrite 207 for blockdev-create job

This rewrites the test case 207 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.

Most of the test

qemu-iotests: Rewrite 207 for blockdev-create job

This rewrites the test case 207 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.

Most of the test cases stay the same as before (the exception being some
improved 'size' options that allow distinguishing which command created
the image), but in order to be able to implement proper job handling,
the test case is rewritten in Python.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Fri 09 Mar 2018 15:09:20 GMT
# gpg: using RSA key 7F09B272C88F2F

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Fri 09 Mar 2018 15:09:20 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (56 commits)
qemu-iotests: fix 203 migration completion race
iotests: Tweak 030 in order to trigger a race condition with parallel jobs
iotests: Skip test for ENOMEM error
iotests: Mark all tests executable
iotests: Test creating overlay when guest running
qemu-iotests: Test ssh image creation over QMP
qemu-iotests: Test qcow2 over file image creation with QMP
block: Fail bdrv_truncate() with negative size
file-posix: Fix no-op bdrv_truncate() with falloc preallocation
ssh: Support .bdrv_co_create
ssh: Pass BlockdevOptionsSsh to connect_to_ssh()
ssh: QAPIfy host-key-check option
ssh: Use QAPI BlockdevOptionsSsh object
sheepdog: Support .bdrv_co_create
sheepdog: QAPIfy "redundancy" create option
nfs: Support .bdrv_co_create
nfs: Use QAPI options in nfs_client_open()
rbd: Use qemu_rbd_connect() in qemu_rbd_do_create()
rbd: Assign s->snap/image_name in qemu_rbd_open()
rbd: Support .bdrv_co_create
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qemu-iotests: Test ssh image creation over QMP

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>