Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- mirror: Fix deadlock
- nbd/server: Fix race in draining the export
- qemu-img snapshot: Fix formatting w

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- mirror: Fix deadlock
- nbd/server: Fix race in draining the export
- qemu-img snapshot: Fix formatting with large values
- Fix blockdev-snapshot-sync error reporting for no medium
- iotests fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmX4OG8RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YdiQ//faXfGmbK6rBW4AkpwfrRM8SDHvm6hz7L
# 043ujAi3ziSXXoiec2/RK5wZ27nMJkfIrRHXpH41hgQvC6/3a4eIW6KSTaFV1PdG
# JtHCeopmVmgu7TZQ+kt/J6eLUTTLovoO94HgEfmxpr4CGZfx9RJftf2kCKILcYkh
# 9r04zSZLByVd4FJ5ZrqsFulWif5mXoGKdT/YisY3tKiCwFRWQDOoTymvJA012VtO
# MVmID593zwem3O3qtlGiGlK9qodBR4yof66xa/0gaYP98BZgv+LWnwLKha+OzSpX
# bQlxT26LY4JnSQkTdjF0QYnQiH4Q1kveUcNRZrGpA4iZxVDq1aks5DisThDwqoGG
# rhaPOWyJwJsonM1Enzim5Jd60JqvGdpTLjSA5oSyTjw62lAulnYihInERYSAFyyz
# UhQaO7qSog1//RpPEXEsiVkJBq8BE9l5I+L7+l5SCBhNr/UwZAOer/4m4X6d0SKN
# GEPRx0kH1voikzx7gIQs+Oldqvb0sg+zAvOynBxzpd+Ac6s8bFtWe+eSyWYL/ZGr
# Jg9+PL1xir/Uh7KmOnzt/iVBAmfSRpAo1O72xQXvHFYYtIP7hTkPO/vzqF206WMc
# WQFHHjfp5gVcMZ5AYg6txw+Bbtzu8g0AfB054lgnhihuShpf0E923TTDQFdV755s
# NUlrzuGu2fs=
# =+JIK
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Mar 2024 12:49:51 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests: adapt to output change for recently introduced 'detached header' field
tests/qemu-iotests: Restrict tests using "--blockdev file" to the file protocol
tests/qemu-iotests: Fix some tests that use --image-opts for other protocols
tests/qemu-iotests: Restrict tests that use --image-opts to the 'file' protocol
tests/qemu-iotests: Restrict test 156 to the 'file' protocol
tests/qemu-iotests: Restrict test 134 and 158 to the 'file' protocol
tests/qemu-iotests: Restrict test 130 to the 'file' protocol
tests/qemu-iotests: Restrict test 114 to the 'file' protocol
tests/qemu-iotests: Restrict test 066 to the 'file' protocol
tests/qemu-iotests: Fix test 033 for running with non-file protocols
qemu-img: Fix Column Width and Improve Formatting in snapshot list
blockdev: Fix blockdev-snapshot-sync error reporting for no medium
iotests: Add test for reset/AioContext switches with NBD exports
nbd/server: Fix race in draining the export
mirror: Don't call job_pause_point() under graph lock

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: adapt to output change for recently introduced 'detached header' field

Failure was noticed when running the tests for the qcow2 image format.

Fixes: 0bd779e27e ("crypto: Introduce 'detache

iotests: adapt to output change for recently introduced 'detached header' field

Failure was noticed when running the tests for the qcow2 image format.

Fixes: 0bd779e27e ("crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240216101415.293769-1-f.ebner@proxmox.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-02-01' into staging

Block patches:
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration bl

Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-02-01' into staging

Block patches:
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration block node permissions
- iotests fixes (051 and mirror-ready-cancel-error)
- Remove an outdated comment

# gpg: Signature made Tue 01 Feb 2022 13:34:54 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF

* remotes/hreitz-gitlab/tags/pull-block-2022-02-01: (24 commits)
block.h: remove outdated comment
iotests/migration-permissions: New test
block-backend: Retain permissions after migration
iotests: declare lack of support for compresion_type in IMGOPTS
iotest 214: explicit compression type
iotests 60: more accurate set dirty bit in qcow2 header
iotests: bash tests: filter compression type
iotest 39: use _qcow2_dump_header
iotests: massive use _qcow2_dump_header
iotests/common.rc: introduce _qcow2_dump_header helper
qcow2: simple case support for downgrading of qcow2 images with zstd
iotest 302: use img_info_log() helper
iotests.py: filter compression type out
iotests.py: filter out successful output of qemu-img create
iotest 065: explicit compression type
iotest 303: explicit compression type
iotests.py: rewrite default luks support in qemu_img
iotests: drop qemu_img_verbose() helper
iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'
iotests: specify some unsupported_imgopts for python iotests
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests.py: filter compression type out

We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.

Actually the only test that is interested in real compr

iotests.py: filter compression type out

We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.

Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

show more ...

Merge tag 'pull-block-2021-11-23' of https://gitlab.com/hreitz/qemu into staging

Block patches for 6.2-rc2:
- Fix memory leak in vvfat when vvfat_open() fails
- iotest fixes for the gnutls crypto ba

Merge tag 'pull-block-2021-11-23' of https://gitlab.com/hreitz/qemu into staging

Block patches for 6.2-rc2:
- Fix memory leak in vvfat when vvfat_open() fails
- iotest fixes for the gnutls crypto backend

# gpg: Signature made Tue 23 Nov 2021 04:58:05 PM CET
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF

* tag 'pull-block-2021-11-23' of https://gitlab.com/hreitz/qemu:
iotests/149: Skip on unsupported ciphers
iotests: Use aes-128-cbc
block/vvfat.c fix leak when failure occurs

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

iotests: Use aes-128-cbc

Our gnutls crypto backend (which is the default as of 8bd0931f6)
supports neither twofish-128 nor the CTR mode. CBC and aes-128 are
supported by all of our backends (as far

iotests: Use aes-128-cbc

Our gnutls crypto backend (which is the default as of 8bd0931f6)
supports neither twofish-128 nor the CTR mode. CBC and aes-128 are
supported by all of our backends (as far as I can tell), so use
aes-128-cbc in our iotests.

(We could also use e.g. aes-256-cbc, but the different key sizes would
lead to different key slot offsets and so change the reference output
more, which is why I went with aes-128.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211117151707.52549-2-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-10-27' into staging

QAPI patches patches for 2021-10-27

# gpg: Signature made Wed 27 Oct 2021 08:21:54 AM PDT
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-10-27' into staging

QAPI patches patches for 2021-10-27

# gpg: Signature made Wed 27 Oct 2021 08:21:54 AM PDT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]

* remotes/armbru/tags/pull-qapi-2021-10-27:
qapi: Implement deprecated-input={reject,crash} for enum values
qapi: Move compat policy from QObject to generic visitor
qapi: Add feature flags to enum members
qapi: Enable enum member introspection to show more than name
qapi: Improve input_type_enum()'s error message

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

qapi: Improve input_type_enum()'s error message

The error message claims the parameter is invalid:

$ qemu-system-x86_64 -object qom-type=nonexistent
qemu-system-x86_64: -object qom-type=non

qapi: Improve input_type_enum()'s error message

The error message claims the parameter is invalid:

$ qemu-system-x86_64 -object qom-type=nonexistent
qemu-system-x86_64: -object qom-type=nonexistent: Invalid parameter 'nonexistent'

What's wrong is actually the *value* 'nonexistent'. Improve the
message to

qemu-system-x86_64: -object qom-type=nonexistent: Parameter 'qom-type' does not accept value 'nonexistent'

Fixes: https://gitlab.com/qemu-project/qemu/-/issues/608
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211020180231.434071-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-storage-daemon: add --pidfile option
- qemu-storage-daemon: CLI error messages include the op

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-storage-daemon: add --pidfile option
- qemu-storage-daemon: CLI error messages include the option name now
- vhost-user-blk export: Misc fixes
- docs: Improvements for qemu-storage-daemon documentation
- parallels: load bitmap extension
- backup-top: Don't crash on post-finalize accesses
- Improve error messages related to node-name options
- iotests improvements

# gpg: Signature made Mon 08 Mar 2021 17:01:41 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (30 commits)
blockdev: Clarify error messages pertaining to 'node-name'
block: Clarify error messages pertaining to 'node-name'
docs: qsd: Explain --export nbd,name=... default
MAINTAINERS: update parallels block driver
iotests: add parallels-read-bitmap test
iotests.py: add unarchive_sample_image() helper
parallels: support bitmap extension for read-only mode
block/parallels: BDRVParallelsState: add cluster_size field
parallels.txt: fix bitmap L1 table description
qcow2-bitmap: make bytes_covered_by_bitmap_cluster() public
block/export: port virtio-blk read/write range check
block/export: port virtio-blk discard/write zeroes input validation
block/export: fix vhost-user-blk export sector number calculation
block/export: use VIRTIO_BLK_SECTOR_BITS
block/export: fix blk_size double byteswap
libqtest: add qtest_remove_abrt_handler()
libqtest: add qtest_kill_qemu()
libqtest: add qtest_socket_server()
vhost-user-blk: fix blkcfg->num_queues endianness
docs: replace insecure /tmp examples in qsd docs
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

block: Clarify error messages pertaining to 'node-name'

Some error messages contain ambiguous representations of the 'node-name'
parameter. This can be particularly confusing when exchanging QMP
mes

block: Clarify error messages pertaining to 'node-name'

Some error messages contain ambiguous representations of the 'node-name'
parameter. This can be particularly confusing when exchanging QMP
messages (C = client, S = server):

C: {"execute": "block_resize", "arguments": { "device": "my_file", "size": 26843545600 }}
S: {"error": {"class": "GenericError", "desc": "Cannot find device=my_file nor node_name="}}
^^^^^^^^^

This error message suggests one could send a message with a key called
'node_name':

C: {"execute": "block_resize", "arguments": { "node_name": "my_file", "size": 26843545600 }}
^^^^^^^^^

but using the underscore is actually incorrect, the parameter should be
'node-name':

S: {"error": {"class": "GenericError", "desc": "Parameter 'node_name' is unexpected"}}

This behavior was uncovered in bz1651437, but I ended up going down a
rabbit hole looking for other areas where this miscommunication might
occur and changing those accordingly as well.

Fixes: https://bugzilla.redhat.com/1651437
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210305151929.1947331-2-ckuehl@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-02-02-v2' into staging

nbd patches for 2021-02-02

- more cleanup from iotest python conversion
- progress towards consistent use of si

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-02-02-v2' into staging

nbd patches for 2021-02-02

- more cleanup from iotest python conversion
- progress towards consistent use of signed 64-bit types through block layer
- fix some crashes related to NBD reconnect

# gpg: Signature made Wed 03 Feb 2021 14:20:01 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-02-02-v2:
nbd: make nbd_read* return -EIO on error
block/nbd: only enter connection coroutine if it's present
block/nbd: only detach existing iochannel from aio_context
block/io: use int64_t bytes in copy_range
block/io: support int64_t bytes in read/write wrappers
block/io: support int64_t bytes in bdrv_co_p{read,write}v_part()
block/io: support int64_t bytes in bdrv_aligned_preadv()
block/io: support int64_t bytes in bdrv_co_do_copy_on_readv()
block/io: support int64_t bytes in bdrv_aligned_pwritev()
block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes()
block/io: use int64_t bytes in driver wrappers
block: use int64_t as bytes type in tracked requests
block/io: improve bdrv_check_request: check qiov too
block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes
block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure
block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up
block: fix theoretical overflow in bdrv_init_padding()
util/iov: make qemu_iovec_init_extended() honest
block: refactor bdrv_check_request: add errp
iotests: Fix expected whitespace for 185

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

block: refactor bdrv_check_request: add errp

It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.

Signed-off-by: Vladimir

block: refactor bdrv_check_request: add errp

It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()

# gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (34 commits)
block: Fix deadlock in bdrv_co_yield_to_drain()
block: Fix locking in qmp_block_resize()
block: Simplify qmp_block_resize() error paths
block: introduce BDRV_MAX_LENGTH
block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()
block/io: bdrv_refresh_limits(): use ERRP_GUARD
block/file-posix: fix workaround in raw_do_pwrite_zeroes()
can-host: Fix crash when 'canbus' property is not set
iotests/221: Discard image before qemu-img map
file-posix: check the use_lock before setting the file lock
iotests/308: Add test for FUSE exports
iotests: Enable fuse for many tests
iotests: Allow testing FUSE exports
iotests: Give access to the qemu-storage-daemon
storage-daemon: Call bdrv_close_all() on exit
iotests/287: Clean up subshell test image
iotests: Let _make_test_img guess $TEST_IMG_FILE
iotests: Restrict some Python tests to file
iotests/091: Use _cleanup_qemu instad of "wait"
iotests: Derive image names from $TEST_IMG
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

block: introduce BDRV_MAX_LENGTH

We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request rel

block: introduce BDRV_MAX_LENGTH

We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.

It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.

So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.

And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.

Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.

Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.

So, alignment can't be greater than 2^30.

Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.

OK, then, let's apply it to block/io.

Let's consider all block/io entry points of offset/bytes:

4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().

We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.

And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:

file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values

Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.

After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.

For all io requests except for discard we keep for now old restriction
of 32bit request length.

iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-08-26' into staging

Block patches:
- qcow2 subclusters (extended L2 entries)

# gpg: Signature made Wed 26 Aug 2020 08:37:04 BST
#

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-08-26' into staging

Block patches:
- qcow2 subclusters (extended L2 entries)

# gpg: Signature made Wed 26 Aug 2020 08:37:04 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-08-26: (34 commits)
iotests: Add tests for qcow2 images with extended L2 entries
qcow2: Assert that expand_zero_clusters_in_l1() does not support subclusters
qcow2: Allow preallocation and backing files if extended_l2 is set
qcow2: Add the 'extended_l2' option and the QCOW2_INCOMPAT_EXTL2 bit
qcow2: Add prealloc field to QCowL2Meta
qcow2: Add subcluster support to qcow2_measure()
qcow2: Add subcluster support to qcow2_co_pwrite_zeroes()
qcow2: Add subcluster support to handle_alloc_space()
qcow2: Clear the L2 bitmap when allocating a compressed cluster
qcow2: Update L2 bitmap in qcow2_alloc_cluster_link_l2()
qcow2: Add subcluster support to check_refcounts_l2()
qcow2: Add subcluster support to discard_in_l2_slice()
qcow2: Add subcluster support to zero_in_l2_slice()
qcow2: Add subcluster support to qcow2_get_host_offset()
qcow2: Add subcluster support to calculate_l2_meta()
qcow2: Handle QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC
qcow2: Replace QCOW2_CLUSTER_* with QCOW2_SUBCLUSTER_*
qcow2: Add cluster type parameter to qcow2_get_host_offset()
qcow2: Add qcow2_cluster_is_allocated()
qcow2: Add qcow2_get_subcluster_range_type()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qcow2: Allow preallocation and backing files if extended_l2 is set

Traditional qcow2 images don't allow preallocation if a backing file
is set. This is because once a cluster is allocated there is n

qcow2: Allow preallocation and backing files if extended_l2 is set

Traditional qcow2 images don't allow preallocation if a backing file
is set. This is because once a cluster is allocated there is no way to
tell that its data should be read from the backing file.

Extended L2 entries have individual allocation bits for each
subcluster, and therefore it is perfectly possible to have an
allocated cluster with all its subclusters unallocated.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6d5b0f38e7dc5f2f31d8cab1cb92044e9909aece.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

qcow2: Add the 'extended_l2' option and the QCOW2_INCOMPAT_EXTL2 bit

Now that the implementation of subclusters is complete we can finally
add the necessary options to create and read images with th

qcow2: Add the 'extended_l2' option and the QCOW2_INCOMPAT_EXTL2 bit

Now that the implementation of subclusters is complete we can finally
add the necessary options to create and read images with this feature,
which we call "extended L2 entries".

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6476caaa73216bd05b7bb2d504a20415e1665176.1594396418.git.berto@igalia.com>
[mreitz: %s/5\.1/5.2/; fixed 302's and 303's reference output]
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-05-13' into staging

Block patches:
- zstd compression for qcow2
- Fix use-after-free

# gpg: Signature made Wed 13 May 2020 15:14:

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-05-13' into staging

Block patches:
- zstd compression for qcow2
- Fix use-after-free

# gpg: Signature made Wed 13 May 2020 15:14:06 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-05-13:
block/block-copy: fix use-after-free of task pointer
iotests: 287: add qcow2 compression type test
qcow2: add zstd cluster compression
qcow2: rework the cluster compression routine
qcow2: introduce compression type feature

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qcow2: introduce compression type feature

The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (

qcow2: introduce compression type feature

The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.

It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.

The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.

The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.

Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.

The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280

Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL
- vmdk: Set vmdk parent backing_format to vmdk
- qcow2: Preallocation fixes (especially for external data files)
- Add linear-buffer-based APIs (as wrappers around qiov-based ones)
- Various code cleanups and small corner case fixes

# gpg: Signature made Tue 30 Apr 2019 16:35:09 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (27 commits)
block/qed: add missed coroutine_fn markers
iotests: Check that images are in read-only mode after block-commit
commit: Make base read-only if there is an early failure
qemu-img: use buffer-based io
block/stream: use buffer-based io
block/commit: use buffer-based io
block/backup: use buffer-based io
block/parallels: use buffer-based io
block/qed: use buffer-based io
block/qcow: use buffer-based io
block/qcow2: use buffer-based io
block: introduce byte-based io helpers
qcow2: Fix error handling in the compression code
qcow2: Fix qcow2_make_empty() with external data file
qemu-img: Make create hint at protocol options
iotests: Perform the correct test in 082
qcow2: Fix full preallocation with external data file
qcow2: Add errp to preallocate_co()
qcow2: Avoid COW during metadata preallocation
qemu-img: Saner printing of large file sizes
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qemu-img: Saner printing of large file sizes

Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:

$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nb

qemu-img: Saner printing of large file sizes

Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:

$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
file format: raw
virtual size: -8388607T (9223372036854775296 bytes)
disk size: unavailable

But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).

Quite a few iotests need updates to expected output to match.

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'mreitz/tags/pull-block-2019-02-25' into queue-block

Block patches:
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qe

Merge remote-tracking branch 'mreitz/tags/pull-block-2019-02-25' into queue-block

Block patches:
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon Feb 25 15:13:43 2019 CET
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* mreitz/tags/pull-block-2019-02-25: (45 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

iotests.py: s/_/-/g on keys in qmp_log()

This follows what qmp() does, so the output will correspond to the
actual QMP command.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 201902101457

iotests.py: s/_/-/g on keys in qmp_log()

This follows what qmp() does, so the output will correspond to the
actual QMP command.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190210145736.1486-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python queue, 2018-10-30

* Makefile rule for running acceptance tests
(make check-acceptance) (Cleber Ro

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python queue, 2018-10-30

* Makefile rule for running acceptance tests
(make check-acceptance) (Cleber Rosa)
* Make iotests compatible with Python 3
(Max Reitz)
* device-crash-test whitelist update (Thomas Huth)
* Misc cleanups (Cleber Rosa)

# gpg: Signature made Wed 31 Oct 2018 00:28:39 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/python-next-pull-request:
scripts/qemu.py: use a more consistent docstring style
scripts/decodetree.py: fix reference to attributes
Travis support for the acceptance tests
Acceptance tests: add make rule for running them
Bootstrap Python venv for tests
iotests: Unify log outputs between Python 2 and 3
iotests: Modify imports for Python 3
iotests: 'new' module replacement in 169
iotests: Explicitly bequeath FDs in Python
iotests: Different iterator behavior in Python 3
iotests: Use // for Python integer division
iotests: Use Python byte strings where appropriate
iotests: Flush in iotests.py's QemuIoInteractive
iotests: Make nbd-fault-injector flush
scripts/device-crash-test: Remove devices that are not user_creatable anymore

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...