Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads

# gpg: Signature made Tue 14 Jul 2020 14:24:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
block: Avoid stale pointer dereference in blk_get_aio_context()
qemu-img: Deprecate use of -b without -F
block: Add support to warn on backing file change without format
iotests: Specify explicit backing format where sensible
qcow2: Deprecate use of qemu-img amend to change backing file
block: Error if backing file fails during creation without -u
qcow: Tolerate backing_fmt=
vmdk: Add trivial backing_fmt support
sheepdog: Add trivial backing_fmt support
block: Finish deprecation of 'qemu-img convert -n -o'
qemu-img: Flush stdout before before potential stderr messages
file-posix: Mitigate file fragmentation with extent size hints
iotests/059: Filter out disk size with more standard filter
qemu-img map: Don't limit block status request size
iotests: Simplify _filter_img_create() a bit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: Specify explicit backing format where sensible

There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become

iotests: Specify explicit backing format where sensible

There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.

The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.

iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2017-04-03' into staging

Block patches for 2.9-rc3

# gpg: Signature made Mon 03 Apr 2017 16:29:49 BST
# gpg: using RSA

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2017-04-03' into staging

Block patches for 2.9-rc3

# gpg: Signature made Mon 03 Apr 2017 16:29:49 BST
# gpg: using RSA key 0xF407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2017-04-03:
block/parallels: Avoid overflows
iotests: Improve image-clear tests on non-aligned image
qcow2: Discard unaligned tail when wiping image
iotests: fix 097 when run with qcow
qemu-io-cmds: Assert that global and nofile commands don't use ct->perms
sheepdog: Fix blockdev-add
nbd: Tidy up blockdev-add interface
sockets: New helper socket_address_crumple()
qapi-schema: SocketAddressFlat variants 'vsock' and 'fd'
gluster: Prepare for SocketAddressFlat extension
block: Document -drive problematic code and bugs
io vnc sockets: Clean up SocketAddressKind switches
char: Fix socket with "type": "vsock" address
nbd sockets vnc: Mark problematic address family tests TODO
block: add missed aio_context_acquire into release_drive

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: Improve image-clear tests on non-aligned image

Tweak 097 and 176 to operate on an image that is not cluster-aligned,
to give further coverage of clearing out an entire image, including
the

iotests: Improve image-clear tests on non-aligned image

Tweak 097 and 176 to operate on an image that is not cluster-aligned,
to give further coverage of clearing out an entire image, including
the recent fix to eliminate the difference between fast path (97) and
slow (176) for qcow2. Also tested on qcow (97 only, since qcow lacks
snapshots).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-4-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

iotests: fix 097 when run with qcow

The previous commit:

commit a3e1505daec31ef56f0489f8c8fff1b8e4ca92bd
Author: Eric Blake <eblake@redhat.com>
Date: Mon Dec 5 09:49:34 2016 -0600

qcow

iotests: fix 097 when run with qcow

The previous commit:

commit a3e1505daec31ef56f0489f8c8fff1b8e4ca92bd
Author: Eric Blake <eblake@redhat.com>
Date: Mon Dec 5 09:49:34 2016 -0600

qcow2: Don't strand clusters near 2G intervals during commit

extended the 097 test case so that it did two passes, once
with an internal snapshot, once without.

qcow (v1) does not support internal snapshots, so this change
broke test 097 when run against qcow.

This splits 097 in two, creating a new 176 that tests the
internal snapshot codepath, effectively putting 097 back
to its content before the above commit.

Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170221115512.21918-8-berrange@redhat.com>
[eblake: test collisions: s/173/176/g]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging

Block layer patches for 2.8.0-rc3

# gpg: Signature made Tue 06 Dec 2016 02:44:39 PM GMT
# gpg: using RSA key 0x7F0

Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging

Block layer patches for 2.8.0-rc3

# gpg: Signature made Tue 06 Dec 2016 02:44:39 PM GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* kwolf/tags/for-upstream:
qcow2: Don't strand clusters near 2G intervals during commit

Message-id: 1481037418-10239-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

qcow2: Don't strand clusters near 2G intervals during commit

The qcow2_make_empty() function is reached during 'qemu-img commit',
in order to clear out ALL clusters of an image. However, if the
ima

qcow2: Don't strand clusters near 2G intervals during commit

The qcow2_make_empty() function is reached during 'qemu-img commit',
in order to clear out ALL clusters of an image. However, if the
image cannot use the fast code path (true if the image is format
0.10, or if the image contains a snapshot), the cluster size is
larger than 512, and the image is larger than 2G in size, then our
choice of sector_step causes problems. Since it is not cluster
aligned, but qcow2_discard_clusters() silently ignores an unaligned
head or tail, we are leaving clusters allocated.

Enhance the testsuite to expose the flaw, and patch the problem by
ensuring our step size is aligned.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-09-11' into staging

trivial patches for 2015-09-11

# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID A4C3D

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-09-11' into staging

trivial patches for 2015-09-11

# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits)
virtio-vga: enable for i386
hw/arm/spitz: Remove meaningless blank Property
hw/gpio/zaurus: Remove meaningless blank Property
hw/virtio/virtio-pci: Remove meaningless blank Property
hw/s390x/s390-virtio-bus: Remove meaningless blank Property
typofixes - v4
qapi-schema: remove legacy<> from doc
disas/microblaze: Remove unused code
help: dd missing newline
Target-ppc: Remove unnecessary variable
baum: Fix build with debugging enabled
linux-user: Fix warnings caused by missing 'static' attribute
opts: produce valid command line in qemu_opts_print
docs: fix a qga/qapi-schema.json comment
trivial: remove trailing newline from error_report
maint: avoid useless "if (foo) free(foo)" pattern
maint: avoid useless "if (foo) free(foo)" pattern
maint: remove unused include for strings.h
maint: remove unused include for signal.h
maint: remove unused include for dirent.h
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

opts: produce valid command line in qemu_opts_print

This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending

opts: produce valid command line in qemu_opts_print

This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily. This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Fri 12 Dec 2014 17:09:56 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan H

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Fri 12 Dec 2014 17:09:56 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
linux-aio: simplify removal of completed iocbs from the list
linux-aio: drop return code from laio_io_unplug and ioq_submit
linux-aio: rename LaioQueue idx field to "n"
linux-aio: track whether the queue is blocked
linux-aio: queue requests that cannot be submitted
block: drop unused bdrv_clear_incoming_migration_all() prototype
block: Don't add trailing space in "Formating..." message
qemu-iotests: Remove traling whitespaces in *.out
block: vhdx - set .bdrv_has_zero_init to bdrv_has_zero_init_1
iotests: Fix test 039
iotests: Filter for "Killed" in qemu-io output
qemu-io: Add sigraise command
block: vhdx - change .vhdx_create default block state to ZERO
block: vhdx - update PAYLOAD_BLOCK_UNMAPPED value to match 1.00 spec
block: vhdx - remove redundant comments
block/rbd: fix memory leak
iotests: Add test for vmdk JSON file names
vmdk: Fix error for JSON descriptor file names
block migration: fix return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qemu-iotests: Remove traling whitespaces in *.out

This is simply:

$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@re

qemu-iotests: Remove traling whitespaces in *.out

This is simply:

$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan H

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: Add test for backing-chain commits

Add a test for qemu-img commit on backing chains with more than two
images. This test also checks whether the top image is emptied (unless
this is prevent

iotests: Add test for backing-chain commits

Add a test for qemu-img commit on backing chains with more than two
images. This test also checks whether the top image is emptied (unless
this is prevented by specifying either -d or -b) and does therefore not
work for qed and vmdk which requires it to be separate from 020.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-14-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...