Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-10-22-v3' into staging

QAPI patches for 2019-10-22

# gpg: Signature made Tue 22 Oct 2019 15:56:36 BST
# gpg: using RS

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-10-22-v3' into staging

QAPI patches for 2019-10-22

# gpg: Signature made Tue 22 Oct 2019 15:56:36 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2019-10-22-v3:
qapi: Allow introspecting fix for savevm's cooperation with blockdev
tests/qapi-schema: Cover feature documentation comments
tests: qapi: Test 'features' of commands
qapi: Add feature flags to commands
tests/qapi-schema: Tidy up test output indentation
qapi: Clear scripts/qapi/doc.py executable bits again
qapi: Split up scripts/qapi/common.py
qapi: Move gen_enum(), gen_enum_lookup() back to qapi/types.py
qapi: Speed up frontend tests
qapi: Eliminate accidental global frontend state
qapi: Store pragma state in QAPISourceInfo, not global state
qapi: Don't suppress doc generation without pragma doc-required

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qapi: Speed up frontend tests

"make check-qapi-schema" takes around 10s user + system time for me.
With -j, it takes a bit over 3s real time. We have worse tests. It's
still annoying when you work

qapi: Speed up frontend tests

"make check-qapi-schema" takes around 10s user + system time for me.
With -j, it takes a bit over 3s real time. We have worse tests. It's
still annoying when you work on the QAPI generator.

Some 1.4s user + system time is consumed by make figuring out what to
do, measured by making a target that does nothing. There's nothing I
can do about that right now. But let's see what we can do about the
other 8s.

Almost 7s are spent running test-qapi.py for every test case, the rest
normalizing and diffing test-qapi.py output. We have 190 test cases.

If I downgrade to python2, it's 4.5s, but python2 is a goner.

Hacking up test-qapi.py to exit(0) without doing anything makes it
only marginally faster. The problem is Python startup overhead.

Our configure puts -B into $(PYTHON). Running without -B is faster:
4.4s.

We could improve the Makefile to run test cases only when the test
case or the generator changed. But I'm after improvement in the case
where the generator changed.

test-qapi.py is designed to be the simplest possible building block
for a shell script to do the complete job (it's actually a Makefile,
not a shell script; no real difference). Python is just not meant for
that. It's for bigger blocks.

Move the post-processing and diffing into test-qapi.py, and make it
capable of testing multiple schema files. Set executable bits while
there.

Running it once per test case now takes slightly longer than 8s. But
running it once for all of them takes under 0.2s.

Messing with the Makefile to run it only on the tests that need
retesting is clearly not worth the bother.

Expected error output changes because the new normalization strips off
$(SRCDIR)/tests/qapi-schema/ instead of just $(SRCDIR)/.

The .exit files go away, because there is no exit status to test
anymore.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-5-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-09-28' into staging

QAPI patches for 2019-09-28

# gpg: Signature made Sat 28 Sep 2019 16:18:13 BST
# gpg: using RSA k

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-09-28' into staging

QAPI patches for 2019-09-28

# gpg: Signature made Sat 28 Sep 2019 16:18:13 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2019-09-28: (27 commits)
qapi: Improve source file read error handling
qapi: Improve reporting of redefinition
qapi: Improve reporting of missing documentation comment
qapi: Eliminate check_keys(), rename check_known_keys()
qapi: Improve reporting of invalid 'if' further
qapi: Avoid redundant definition references in error messages
qapi: Improve reporting of missing / unknown definition keys
qapi: Improve reporting of invalid flags
qapi: Improve reporting of invalid 'if' errors
qapi: Move context-free checking to the proper place
qapi: Move context-sensitive checking to the proper place
qapi: Inline check_name() into check_union()
qapi: Plumb info to the QAPISchemaMember
qapi: Make check_type()'s array case a bit more obvious
qapi: Move check for reserved names out of add_name()
qapi: Report invalid '*' prefix like any other invalid name
qapi: Use check_name_str() where it suffices
qapi: Improve reporting of invalid name errors
qapi: Reorder check_FOO() parameters for consistency
qapi: Improve reporting of member name clashes
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qapi: Change frontend error messages to start with lower case

Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle

qapi: Change frontend error messages to start with lower case

Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle of
an error message. The next patch will do that. Switch to lower case
to keep it simpler.

For what it's worth, the GNU Coding Standards advise the message
"should not begin with a capital letter when it follows a program name
and/or file name, because that isn’t the beginning of a sentence. (The
sentence conceptually starts at the beginning of the line.)"

While there, avoid breaking lines containing multiple arguments in the
middle of an argument.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-7-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-03-16' into staging

QAPI patches for 2017-03-16

# gpg: Signature made Thu 16 Mar 2017 06:18:38 GMT
# gpg: using RSA k

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-03-16' into staging

QAPI patches for 2017-03-16

# gpg: Signature made Thu 16 Mar 2017 06:18:38 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-03-16: (49 commits)
qapi: Fix a misleading parser error message
qapi: Make pylint a bit happier
qapi: Drop unused .check_clash() parameter schema
qapi: union_types is a list used like a dict, make it one
qapi: struct_types is a list used like a dict, make it one
qapi: enum_types is a list used like a dict, make it one
qapi: Factor add_name() calls out of the meta conditional
qapi: Simplify what gets stored in enum_types
qapi: Drop unused variable events
qapi: Eliminate check_docs() and drop QAPIDoc.expr
qapi: Fix detection of bogus member documentation
tests/qapi-schema: Improve coverage of bogus member docs
tests/qapi-schema: Rename doc-bad-args to doc-bad-command-arg
qapi: Move empty doc section checking to doc parser
qapi: Improve error message on @NAME: in free-form doc
qapi: Move detection of doc / expression name mismatch
qapi: Fix detection of doc / expression mismatch
tests/qapi-schema: Improve doc / expression mismatch coverage
qapi2texi: Use category "Object" for all object types
qapi2texi: Generate descriptions for simple union tags
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qapi: Back out doc comments added just to please qapi.py

This reverts commit 3313b61's changes to tests/qapi-schema/, except
for tests/qapi-schema/doc-*.

We could keep some of these doc comments to

qapi: Back out doc comments added just to please qapi.py

This reverts commit 3313b61's changes to tests/qapi-schema/, except
for tests/qapi-schema/doc-*.

We could keep some of these doc comments to serve as positive test
cases. However, they don't actually add to what we get from doc
comment use in actual schemas, as we we don't test output matches
expectations, and don't systematically cover doc comment features.
Proper positive test coverage would be nice.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-4-git-send-email-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-01-16' into staging

QAPI patches for 2017-01-16

# gpg: Signature made Mon 16 Jan 2017 09:26:49 GMT
# gpg: using RSA k

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-01-16' into staging

QAPI patches for 2017-01-16

# gpg: Signature made Mon 16 Jan 2017 09:26:49 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-01-16: (180 commits)
build-sys: add qapi doc generation targets
build-sys: add txt documentation rules
build-sys: use a generic TEXI2MAN rule
build-sys: remove dvi doc generation
build-sys: use --no-split for info
docs: add qemu logo to pdf
qapi: add qapi2texi script
qmp-events: move 'MIGRATION_PASS' doc to schema
qmp-events: move 'DUMP_COMPLETED' doc to schema
qmp-events: move 'MEM_UNPLUG_ERROR' doc to schema
qmp-events: move 'VSERPORT_CHANGE' doc to schema
qmp-events: move 'QUORUM_REPORT_BAD' doc to schema
qmp-events: move 'QUORUM_FAILURE' doc to schema
qmp-events: move 'GUEST_PANICKED' doc to schema
qmp-events: move 'BALLOON_CHANGE' doc to schema
qmp-events: move 'ACPI_DEVICE_OST' doc to schema
qmp-events: move 'MIGRATION' doc to schema
qmp-events: move 'SPICE_MIGRATE_COMPLETED' doc to schema
qmp-events: move 'SPICE_DISCONNECTED' doc to schema
qmp-events: move 'SPICE_INITIALIZED' doc to schema
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qapi: add qapi2texi script

As the name suggests, the qapi2texi script converts JSON QAPI
description into a texi file suitable for different target
formats (info/man/txt/pdf/html...).

It parses the

qapi: add qapi2texi script

As the name suggests, the qapi2texi script converts JSON QAPI
description into a texi file suitable for different target
formats (info/man/txt/pdf/html...).

It parses the following kind of blocks:

Free-form:

##
# = Section
# == Subsection
#
# Some text foo with *emphasis*
# 1. with a list
# 2. like that
#
# And some code:
# | $ echo foo
# | -> do this
# | <- get that
#
##

Symbol description:

##
# @symbol:
#
# Symbol body ditto ergo sum. Foo bar
# baz ding.
#
# @param1: the frob to frobnicate
# @param2: #optional how hard to frobnicate
#
# Returns: the frobnicated frob.
# If frob isn't frobnicatable, GenericError.
#
# Since: version
# Notes: notes, comments can have
# - itemized list
# - like this
#
# Example:
#
# -> { "execute": "quit" }
# <- { "return": {} }
#
##

That's roughly following the following EBNF grammar:

api_comment = "##\n" comment "##\n"
comment = freeform_comment | symbol_comment
freeform_comment = { "# " text "\n" | "#\n" }
symbol_comment = "# @" name ":\n" { member | tag_section | freeform_comment }
member = "# @" name ':' [ text ] "\n" freeform_comment
tag_section = "# " ( "Returns:", "Since:", "Note:", "Notes:", "Example:", "Examples:" ) [ text ] "\n" freeform_comment
text = free text with markup

Note that the grammar is ambiguous: a line "# @foo:\n" can be parsed
both as freeform_comment and as symbol_comment. The actual parser
recognizes symbol_comment.

See docs/qapi-code-gen.txt for more details.

Deficiencies and limitations:
- the generated QMP documentation includes internal types
- union type support is lacking
- type information is lacking in generated documentation
- doc comment error message positions are imprecise, they point
to the beginning of the comment.
- a few minor issues, all marked TODO/FIXME in the code

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-16-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[test-qapi.py tweaked to avoid trailing empty lines in .out]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qmp-2015-05-05' into staging

drop qapi nested structs

# gpg: Signature made Tue May 5 17:40:40 2015 BST using RSA key ID EB918653
# gpg: Good

Merge remote-tracking branch 'remotes/armbru/tags/pull-qmp-2015-05-05' into staging

drop qapi nested structs

# gpg: Signature made Tue May 5 17:40:40 2015 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-qmp-2015-05-05: (40 commits)
qapi: Check for member name conflicts with a base class
qapi: Support (subset of) \u escapes in strings
qapi: Tweak doc references to QMP when QGA is also meant
qapi: Drop dead visitor code related to nested structs
qapi: Drop support for inline nested types
qapi: Drop inline nested structs in query-pci
qapi: Drop inline nested struct in query-version
qapi: Drop tests for inline nested structs
qapi: Merge UserDefTwo and UserDefNested in tests
qapi: Forbid 'type' in schema
qapi: Use 'struct' instead of 'type' in schema
qapi: Document 'struct' metatype
qapi: Prefer 'struct' over 'type' in generator
qapi: More rigorous checking for type safety bypass
qapi: Whitelist commands that don't return dictionary
qapi: Require valid names
qapi: More rigourous checking of types
qapi: Add some type check tests
qapi: Unify type bypass and add tests
qapi: Allow true, false and null in schema json
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qapi: Support (subset of) \u escapes in strings

The handling of \ inside QAPI strings was less than ideal, and
really only worked JSON's \/, \\, \", and our extension of \'
(an obvious extension, wh

qapi: Support (subset of) \u escapes in strings

The handling of \ inside QAPI strings was less than ideal, and
really only worked JSON's \/, \\, \", and our extension of \'
(an obvious extension, when you realize we use '' instead of ""
for strings). For other things, like '\n', it resulted in a
literal 'n' instead of a newline.

Of course, at the moment, we really have no use for escaped
characters, as QAPI has to map to C identifiers, and we currently
support ASCII only for that. But down the road, we may add
support for default values for string parameters to a command
or struct; if that happens, it would be nice to correctly support
all JSON escape sequences, such as \n or \uXXXX. This gets us
closer, by supporting Unicode escapes in the ASCII range.

Since JSON does not require \OCTAL or \xXX escapes, and our QMP
implementation does not understand them either, I intentionally
reject it here, but it would be an easy addition if we desired it.
Likewise, intentionally refusing the NUL byte means we don't have
to worry about C strings being shorter than the qapi input.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...