Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic D

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
# FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
# N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
# aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
# tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
# yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
# =rMle
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Apr 2022 10:31:44 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (53 commits)
target/i386: Remove unused XMMReg, YMMReg types and CPUState fields
target/i386: do not access beyond the low 128 bits of SSE registers
virtio-ccw: do not include headers for all virtio devices
virtio-ccw: move device type declarations to .c files
virtio-ccw: move vhost_ccw_scsi to a separate file
s390x: follow qdev tree to detect SCSI device on a CCW bus
hw: hyperv: Initial commit for Synthetic Debugging device
hyperv: Add support to process syndbg commands
hyperv: Add definitions for syndbg
hyperv: SControl is optional to enable SynIc
thread-posix: optimize qemu_sem_timedwait with zero timeout
thread-posix: implement Semaphore with QemuCond and QemuMutex
thread-posix: use monotonic clock for QemuCond and QemuSemaphore
thread-posix: remove the posix semaphore support
whpx: Added support for breakpoints and stepping
build-sys: simplify AF_VSOCK check
build-sys: drop ntddscsi.h check
Remove qemu-common.h include from most units
qga: remove explicit environ argument from exec/spawn
Move fcntl_setfl() to oslib-posix
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Replace TARGET_WORDS_BIGENDIAN

Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be

Replace TARGET_WORDS_BIGENDIAN

Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200821-xtensa' into staging

target/xtensa updates for 5.2:

- add NMI support;
- add DFPU option implementation;
- update FPU tests to support bot

Merge remote-tracking branch 'remotes/xtensa/tags/20200821-xtensa' into staging

target/xtensa updates for 5.2:

- add NMI support;
- add DFPU option implementation;
- update FPU tests to support both FPU2000 and DFPU;
- add example cores with FPU2000 and DFPU.

# gpg: Signature made Fri 21 Aug 2020 21:09:37 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200821-xtensa: (24 commits)
target/xtensa: import DSP3400 core
target/xtensa: import de233_fpu core
tests/tcg/xtensa: add DFP0 arithmetic tests
tests/tcg/xtensa: test double precision load/store
tests/tcg/xtensa: add fp0 div and sqrt tests
tests/tcg/xtensa: update test_lsc for DFPU
tests/tcg/xtensa: update test_fp1 for DFPU
tests/tcg/xtensa: update test_fp0_conv for DFPU
tests/tcg/xtensa: expand madd tests
tests/tcg/xtensa: update test_fp0_arith for DFPU
tests/tcg/xtensa: fix test execution on ISS
target/xtensa: implement FPU division and square root
target/xtensa: add DFPU registers and opcodes
target/xtensa: add DFPU option
target/xtensa: don't access BR regfile directly
target/xtensa: move FSR/FCR register accessors
target/xtensa: rename FPU2000 translators and helpers
target/xtensa: support copying registers up to 64 bits wide
target/xtensa: add geometry to xtensa_get_regfile_by_name
softfloat: add xtensa specialization for pickNaNMulAdd
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: add DFPU registers and opcodes

DFPU may be configured with 32-bit or with 64-bit registers. Xtensa ISA
does not specify how single-precision values are stored in 64-bit
registers. Exi

target/xtensa: add DFPU registers and opcodes

DFPU may be configured with 32-bit or with 64-bit registers. Xtensa ISA
does not specify how single-precision values are stored in 64-bit
registers. Existing implementations store them in the low half of the
registers.
Add value extraction and write back to single-precision opcodes.
Add new double precision opcodes. Add 64-bit register file.
Add 64-bit values dumping to the xtensa_cpu_dump_state.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

target/xtensa: add DFPU option

Double precision floating point unit is a FPU implementation different
from the FPU2000 in the following ways:
- it may be configured with only single or with both sin

target/xtensa: add DFPU option

Double precision floating point unit is a FPU implementation different
from the FPU2000 in the following ways:
- it may be configured with only single or with both single and double
precision operations support;
- it may be configured with division and square root opcodes;
- FSR register accumulates inValid, division by Zero, Overflow,
Underflow and Inexact result flags of operations;
- QNaNs and SNaNs are handled properly;
- NaN propagation rules are different.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

target/xtensa: implement NMI support

When NMI is configured it is taken regardless of INTENABLE SR contents,
PS.INTLEVEL or PS.EXCM. It is cleared automatically once it's taken.

Add nmi_level to Xt

target/xtensa: implement NMI support

When NMI is configured it is taken regardless of INTENABLE SR contents,
PS.INTLEVEL or PS.EXCM. It is cleared automatically once it's taken.

Add nmi_level to XtensaConfig, puth there NMI level from the overlay or
XCHAL_NUM_INTLEVELS + 1 when NMI is not configured. Add NMI mask to
INTENABLE SR and limit CINTLEVEL to nmi_level - 1 when determining
pending IRQ level in check_interrupt(). Always take and clear pending
interrupt at nmi_level in the handle_interrupt().

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;
- fix simcall opcod

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;
- fix simcall opcode behavior for new hardware;
- drop gen_io_end call from xtensa translator.

# gpg: Signature made Thu 25 Jun 2020 09:08:58 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200625-xtensa:
target/xtensa: drop gen_io_end call
target/xtensa: fix simcall for newer hardware
target/xtensa: fetch HW version from configuration overlay
target/xtensa: work around missing SR definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: fetch HW version from configuration overlay

Xtensa architecture has features which behavior depends on hardware
version. Provide hardware version information to translators: add
Xtens

target/xtensa: fetch HW version from configuration overlay

Xtensa architecture has features which behavior depends on hardware
version. Provide hardware version information to translators: add
XtensaConfig::hw_version and use XCHAL_HW_VERSION from configuration
overlay to initialize it.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200106-xtensa' into staging

target/xtensa improvements for v5.0:

- fix ps.ring use in MPU configs;
- use MPU background map from the configuratio

Merge remote-tracking branch 'remotes/xtensa/tags/20200106-xtensa' into staging

target/xtensa improvements for v5.0:

- fix ps.ring use in MPU configs;
- use MPU background map from the configuration overlay.

# gpg: Signature made Mon 06 Jan 2020 20:00:33 GMT
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200106-xtensa:
target/xtensa: use MPU background map from core configuration
target/xtensa: import xtensa/config/core-isa.h
target/xtensa: fix ps.ring use in MPU configs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: use MPU background map from core configuration

Configuration overlay may define MPU background map. Import
core-matmap.h from the overlay and use XCHAL_MPU_BACKGROUND_MAP macro
if it'

target/xtensa: use MPU background map from core configuration

Configuration overlay may define MPU background map. Import
core-matmap.h from the overlay and use XCHAL_MPU_BACKGROUND_MAP macro
if it's defined.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20190520-xtensa' into staging

target/xtensa: SR reorganization and options for modern cores

Reorganize special register handling to support configu

Merge remote-tracking branch 'remotes/xtensa/tags/20190520-xtensa' into staging

target/xtensa: SR reorganization and options for modern cores

Reorganize special register handling to support configurations with
conflicting SR definitions.

Implement options used by the modern xtensa cores:
- memory protection unit;
- block prefetch;
- exclusive access

Add special register definitions and IRQ types for ECC/parity,
gather/scatter and IDMA.

# gpg: Signature made Mon 20 May 2019 18:53:05 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190520-xtensa:
target/xtensa: implement exclusive access option
target/xtensa: update list of exception causes
target/xtensa: implement block prefetch option opcodes
target/xtensa: implement DIWBUI.P opcode
target/xtensa: implement MPU option
target/xtensa: add parity/ECC option SRs
target/xtensa: define IDMA and gather/scatter IRQ types
target/xtensa: make internal MMU functions static
target/xtensa: get rid of centralized SR properties

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: implement exclusive access option

The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for excl

target/xtensa: implement exclusive access option

The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.

Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

target/xtensa: implement DIWBUI.P opcode

This is a recent addition to the set of data cache opcodes.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: implement MPU option

The Memory Protection Unit Option (MPU) is a combined instruction and
data memory protection unit with more protection flexibility than the
Region Protection Opti

target/xtensa: implement MPU option

The Memory Protection Unit Option (MPU) is a combined instruction and
data memory protection unit with more protection flexibility than the
Region Protection Option or the Region Translation Option but without
any translation capability. It does no demand paging and does not
reference a memory-based page table.

Add memory protection unit option, internal state, SRs and opcodes.
Implement MPU entries dumping in dump_mmu.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

target/xtensa: add parity/ECC option SRs

Add SRs and rsr/wsr/xsr opcodes defined by the parity/ECC xtensa option.
The implementation is trivial since we don't emulate parity/ECC yet.

Signed-off-by:

target/xtensa: add parity/ECC option SRs

Add SRs and rsr/wsr/xsr opcodes defined by the parity/ECC xtensa option.
The implementation is trivial since we don't emulate parity/ECC yet.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

target/xtensa: define IDMA and gather/scatter IRQ types

IDMA and scatter/gather features introduced new IRQ types that
overlay_tool.h need to initialize Xtensa configuration.

Signed-off-by: Max Fil

target/xtensa: define IDMA and gather/scatter IRQ types

IDMA and scatter/gather features introduced new IRQ types that
overlay_tool.h need to initialize Xtensa configuration.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20190228-xtensa' into staging

target/xtensa: FLIX support, various fixes and test improvements

- add FLIX (flexible length instructions extension)

Merge remote-tracking branch 'remotes/xtensa/tags/20190228-xtensa' into staging

target/xtensa: FLIX support, various fixes and test improvements

- add FLIX (flexible length instructions extension) support;
- make testsuite runnable on wider range of xtensa cores;
- add floating point opcode tests;
- don't add duplicate 'static' in import_core.sh script;
- fix undefined opcodes detection in test_mmuhifi_c3 overlay.

# gpg: Signature made Thu 28 Feb 2019 12:53:23 GMT
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190228-xtensa: (40 commits)
tests/tcg/xtensa: add FPU2000 coprocessor tests
tests/tcg/xtensa: add FP1 group tests
tests/tcg/xtensa: add FP0 group conversion tests
tests/tcg/xtensa: add FP0 group arithmetic tests
tests/tcg/xtensa: add LSCI/LSCX group tests
tests/tcg/xtensa: add test for FLIX
tests/tcg/xtensa: conditionalize MMU-related tests
tests/tcg/xtensa: conditionalize windowed register tests
tests/tcg/xtensa: conditionalize and fix s32c1i tests
tests/tcg/xtensa: fix SR tests for big endian configs
tests/tcg/xtensa: conditionalize and expand SR tests
tests/tcg/xtensa: conditionalize timer/CCOUNT tests
tests/tcg/xtensa: conditionalize interrupt tests
tests/tcg/xtensa: add straightforward conditionals
tests/tcg/xtensa: conditionalize cache option tests
tests/tcg/xtensa: conditionalize debug option tests
tests/tcg/xtensa: enable boolean tests
tests/tcg/xtensa: fix endianness issues in test_b
tests/tcg/xtensa: don't use optional opcodes in generic code
tests/tcg/xtensa: support configs with LITBASE
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: move xtensa_finalize_config to xtensa_core_class_init

Don't run xtensa_finalize_config at the time of core registration,
instead run it at the CPU class initialization.

Signed-off-by

target/xtensa: move xtensa_finalize_config to xtensa_core_class_init

Don't run xtensa_finalize_config at the time of core registration,
instead run it at the CPU class initialization.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implementation to avoid i

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implementation to avoid invalidation
of TBs corresponding to previous loop body when a new loop is
encountered;
- extract helper function groups from op_helper.c and move them into
separate source files: exc_helper.c (exception helpers), win_helper.c
(windowed registers helpers), fpu_helper.c (floating point helpers),
mmu_helper.c (memory management helpers) and dbg_helper.c (native debug
helpers).

# gpg: Signature made Tue 22 Jan 2019 18:44:17 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190122-xtensa:
target/xtensa: move non-HELPER functions to helper.c
target/xtensa: drop dump_state helper
target/xtensa: extract interrupt and exception helpers
target/xtensa: extract debug helpers
target/xtensa: extract MMU helpers
target/xtensa: extract windowed registers helpers
target/xtensa: extract FPU helpers
target/xtensa: rework zero overhead loops implementation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: rework zero overhead loops implementation

Don't invalidate TB with the end of zero overhead loop when LBEG or LEND
change. Instead encode the distance from the start of the page where

target/xtensa: rework zero overhead loops implementation

Don't invalidate TB with the end of zero overhead loop when LBEG or LEND
change. Instead encode the distance from the start of the page where the
TB starts to the LEND in the TB cs_base and generate loopback code when
the next PC matches encoded LEND. Distance to a destination within the
same page and up to a maximum instruction length into the next page is
encoded literally, otherwise it's zero. The distance from LEND to LBEG
is also encoded in the cs_base: it's encoded literally when less than
256 or as 0 otherwise. This allows for TB chaining for the loopback
branch at the end of a loop for the most common loop sizes.

With this change the resulting emulation speed is about 10% higher in
softmmu mode on uClibc-ng and LTP tests. Emulation speed in linux
user mode is a few percent lower because there's no direct TB chaining
between different memory pages. Testing with lower limit on direct TB
chaining range shows gradual slowdown to ~15% for the block size of 64
bytes and ~50% for the block size of 32 bytes.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20180630-xtensa' into staging

target/xtensa updates:

- add diagnostic for zero-overhead loop alignment;
- convert to TranslatorOps;
- don't call ge

Merge remote-tracking branch 'remotes/xtensa/tags/20180630-xtensa' into staging

target/xtensa updates:

- add diagnostic for zero-overhead loop alignment;
- convert to TranslatorOps;
- don't call get_page_addr_code() from helper functions.

# gpg: Signature made Sat 30 Jun 2018 22:16:30 BST
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20180630-xtensa:
xtensa: Avoid calling get_page_addr_code() from helper function
target/xtensa: Convert to TranslatorOps
target/xtensa: Change gen_intermediate_code dc to pointer
target/xtensa: Convert to DisasContextBase
target/xtensa: Replace DISAS_UPDATE with DISAS_NORETURN
target/xtensa: check zero overhead loop alignment

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/xtensa: check zero overhead loop alignment

ISA book documents that the first instruction of zero overhead loop
must fit completely into naturally aligned region of an instruction
fetch unit s

target/xtensa: check zero overhead loop alignment

ISA book documents that the first instruction of zero overhead loop
must fit completely into naturally aligned region of an instruction
fetch unit size. Check that condition and log a message if it's
violated.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging

target/xtensa linux-user support.

- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging

Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging

target/xtensa linux-user support.

- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.

# gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20180316-xtensa:
MAINTAINERS: fix W: address for xtensa
qemu-binfmt-conf.sh: add qemu-xtensa
target/xtensa: add linux-user support
linux-user: drop unused target_msync function
linux-user: fix target_mprotect/target_munmap error return values
linux-user: fix assertion in shmdt
linux-user: fix mmap/munmap/mprotect/mremap/shmat
target/xtensa: support MTTCG
target/xtensa: use correct number of registers in gdbstub
target/xtensa: mark register windows in the dump
target/xtensa: dump correct physical registers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# linux-user/syscall.c

show more ...

target/xtensa: use correct number of registers in gdbstub

System emulation should provide access to all registers, userspace
emulation should only provide access to unprivileged registers.
Record re

target/xtensa: use correct number of registers in gdbstub

System emulation should provide access to all registers, userspace
emulation should only provide access to unprivileged registers.
Record register flags from GDB register map definition, calculate both
num_regs and num_core_regs if either is zero. Use num_regs in system
emulation, num_core_regs in userspace emulation gdbstub.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20180122-xtensa' into staging

target/xtensa updates:

- make mini-bootloader independent of the initial CPU state;
- add noMMU XTFPGA variants;
- ad

Merge remote-tracking branch 'remotes/xtensa/tags/20180122-xtensa' into staging

target/xtensa updates:

- make mini-bootloader independent of the initial CPU state;
- add noMMU XTFPGA variants;
- add two noMMU cores: de212 and sample_controller;
- fix issues reported by coverity against xtensa translator and disassembler.

# gpg: Signature made Mon 22 Jan 2018 20:00:01 GMT
# gpg: using RSA key 0x51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20180122-xtensa:
target/xtensa: disas/xtensa: fix coverity warnings
target/xtensa: add sample_controller core
target/xtensa: allow different default CPU for MMU/noMMU
target/xtensa: add de212 core
hw/xtensa/xtfpga: support noMMU cores
hw/xtensa/xtfpga: extract flash configuration
hw/xtensa: extract xtensa_create_memory_regions
target/xtensa: fix default sysrom/sysram addresses
hw/xtensa/xtfpga: clean up function/structure names
hw/xtensa/xtfpga: rewrite mini bootloader

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...