Revert "target/arm: Fix usage of MMU indexes when EL3 is AArch32"

This reverts commit 4c2c0474693229c1f533239bb983495c5427784d.

This commit tried to fix a problem with our usage of MMU indexes when

Revert "target/arm: Fix usage of MMU indexes when EL3 is AArch32"

This reverts commit 4c2c0474693229c1f533239bb983495c5427784d.

This commit tried to fix a problem with our usage of MMU indexes when
EL3 is AArch32, using what it described as a "more complicated
approach" where we share the same MMU index values for Secure PL1&0
and NonSecure PL1&0. In theory this should work, but the change
didn't account for (at least) two things:

(1) The design change means we need to flush the TLBs at any point
where the CPU state flips from one to the other. We already flush
the TLB when SCR.NS is changed, but we don't flush the TLB when we
take an exception from NS PL1&0 into Mon or when we return from Mon
to NS PL1&0, and the commit didn't add any code to do that.

(2) The ATS12NS* address translate instructions allow Mon code (which
is Secure) to do a stage 1+2 page table walk for NS. I thought this
was OK because do_ats_write() does a page table walk which doesn't
use the TLBs, so because it can pass both the MMU index and also an
ARMSecuritySpace argument we can tell the table walk that we want NS
stage1+2, not S. But that means that all the code within the ptw
that needs to find e.g. the regime EL cannot do so only with an
mmu_idx -- all these functions like regime_sctlr(), regime_el(), etc
would need to pass both an mmu_idx and the security_space, so they
can tell whether this is a translation regime controlled by EL1 or
EL3 (and so whether to look at SCTLR.S or SCTLR.NS, etc).

In particular, because regime_el() wasn't updated to look at the
ARMSecuritySpace it would return 1 even when the CPU was in Monitor
mode (and the controlling EL is 3). This meant that page table walks
in Monitor mode would look at the wrong SCTLR, TCR, etc and would
generally fault when they should not.

Rather than trying to make the complicated changes needed to rescue
the design of 4c2c04746932, we revert it in order to instead take the
route that that commit describes as "the most straightforward" fix,
where we add new MMU indexes EL30_0, EL30_3, EL30_3_PAN to correspond
to "Secure PL1&0 at PL0", "Secure PL1&0 at PL1", and "Secure PL1&0 at
PL1 with PAN".

This revert will re-expose the "spurious alignment faults in
Secure PL0" issue #2326; we'll fix it again in the next commit.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241101142845.1712482-2-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 056c5c90c171c4895b407af0cf3d198e1d44b40f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'pull-target-arm-20241105' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Fix MMU indexes for AArch32 Secure PL1&0 in a less complex and buggy way
*

Merge tag 'pull-target-arm-20241105' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Fix MMU indexes for AArch32 Secure PL1&0 in a less complex and buggy way
* Fix SVE SDOT/UDOT/USDOT (4-way, indexed)
* softfloat: set 2-operand NaN propagation rule at runtime
* disas: Fix build against Capstone v6 (again)
* hw/rtc/ds1338: Trace send and receive operations
* hw/timer/imx_gpt: Convert DPRINTF to trace events
* hw/watchdog/wdt_imx2: Remove redundant assignment
* hw/sensor/tmp105: Convert printf() to trace event, add tracing for read/write access
* hw/net/npcm_gmac: Change error log to trace event
* target/arm: Enable FEAT_CMOW for -cpu max

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmcp/yoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3ucMD/9pWk2ETLjdviPxlacs5IoM
# HvGn8Ll2BSMbeb4YdJc7oZ4YJchGpgHhocEwZuaU9HheWjSg+ZEbyhZgN4DdkT8J
# pYr+Rl0MgDNN219kYnO/yqnqlgHbtUpE7y57Li3ApoGNbWAVxsH0xoT45Lpi7DOd
# uvJfIy/xdaT3zu/4uBjj7c2VrD8wntEayLM8hpqlgeQZKRG3Wtlk/xrQFKOHPDPO
# MDbsGoc2FyogRQoo6WH+J6gkkR9PhqXe6Hbf6WIr1/uffZUZU4M8leSw2DgxrYHo
# Zf36AzttwO4GHyML/5SR7uvzfXl7OkGyjedLGCUa7INc3br2+GvLMltdLGGPM9cc
# ckMHOWd9ZQuSxcpbtPkSYRG0McRE1GLT+KV3BNOLnN9AJl3qv5Qa55iPrtpB08vX
# 3jN6H964w99+NoSB2tTHszpep+M7SRuw5QLsuk3tC/qnBMpzKRwZjGVUegNUtfi/
# Lg5ExF8B62K+xb5j5FmODbbXZmb5AD0rV2MGRIVHjiHdnf7J2FmWUJCe2sYFRnRm
# nzszhdOKw4PBhC2fb6Vb/DwCqdQy9vcITWpWBtcjkV5mAPhcBo/VNKNeKoc/tPNS
# H8FIFIJbtv5aIixqtKcUBUmrBCYy4EoiRMLkqfC09VW60wtWswAP4KBQxi1ogehV
# jJw8AgSLCl2MsVmyzgleZQ==
# =Woag
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 05 Nov 2024 11:19:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20241105' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
target/arm: Enable FEAT_CMOW for -cpu max
hw/net/npcm_gmac: Change error log to trace event
hw/sensor/tmp105: Convert printf() to trace event, add tracing for read/write access
hw/watchdog/wdt_imx2: Remove redundant assignment
hw/timer/imx_gpt: Convert DPRINTF to trace events
hw/rtc/ds1338: Trace send and receive operations
disas: Fix build against Capstone v6 (again)
target/arm: Fix SVE SDOT/UDOT/USDOT (4-way, indexed)
target/arm: Add new MMU indexes for AArch32 Secure PL1&0
Revert "target/arm: Fix usage of MMU indexes when EL3 is AArch32"
softfloat: Remove fallback rule from pickNaN()
target/rx: Explicitly set 2-NaN propagation rule
target/openrisc: Explicitly set 2-NaN propagation rule
target/microblaze: Explicitly set 2-NaN propagation rule
target/microblaze: Move setting of float rounding mode to reset
target/alpha: Explicitly set 2-NaN propagation rule
target/i386: Set 2-NaN propagation rule explicitly
target/xtensa: Explicitly set 2-NaN propagation rule
target/xtensa: Factor out calls to set_use_first_nan()
target/sparc: Explicitly set 2-NaN propagation rule
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Revert "target/arm: Fix usage of MMU indexes when EL3 is AArch32"

This reverts commit 4c2c0474693229c1f533239bb983495c5427784d.

This commit tried to fix a problem with our usage of MMU indexes when

Revert "target/arm: Fix usage of MMU indexes when EL3 is AArch32"

This reverts commit 4c2c0474693229c1f533239bb983495c5427784d.

This commit tried to fix a problem with our usage of MMU indexes when
EL3 is AArch32, using what it described as a "more complicated
approach" where we share the same MMU index values for Secure PL1&0
and NonSecure PL1&0. In theory this should work, but the change
didn't account for (at least) two things:

(1) The design change means we need to flush the TLBs at any point
where the CPU state flips from one to the other. We already flush
the TLB when SCR.NS is changed, but we don't flush the TLB when we
take an exception from NS PL1&0 into Mon or when we return from Mon
to NS PL1&0, and the commit didn't add any code to do that.

(2) The ATS12NS* address translate instructions allow Mon code (which
is Secure) to do a stage 1+2 page table walk for NS. I thought this
was OK because do_ats_write() does a page table walk which doesn't
use the TLBs, so because it can pass both the MMU index and also an
ARMSecuritySpace argument we can tell the table walk that we want NS
stage1+2, not S. But that means that all the code within the ptw
that needs to find e.g. the regime EL cannot do so only with an
mmu_idx -- all these functions like regime_sctlr(), regime_el(), etc
would need to pass both an mmu_idx and the security_space, so they
can tell whether this is a translation regime controlled by EL1 or
EL3 (and so whether to look at SCTLR.S or SCTLR.NS, etc).

In particular, because regime_el() wasn't updated to look at the
ARMSecuritySpace it would return 1 even when the CPU was in Monitor
mode (and the controlling EL is 3). This meant that page table walks
in Monitor mode would look at the wrong SCTLR, TCR, etc and would
generally fault when they should not.

Rather than trying to make the complicated changes needed to rescue
the design of 4c2c04746932, we revert it in order to instead take the
route that that commit describes as "the most straightforward" fix,
where we add new MMU indexes EL30_0, EL30_3, EL30_3_PAN to correspond
to "Secure PL1&0 at PL0", "Secure PL1&0 at PL1", and "Secure PL1&0 at
PL1 with PAN".

This revert will re-expose the "spurious alignment faults in
Secure PL0" issue #2326; we'll fix it again in the next commit.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241101142845.1712482-2-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240919' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* target/arm: Correct ID_AA64ISAR1_EL1 value for neoverse-v1
* target/arm: Mo

Merge tag 'pull-target-arm-20240919' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* target/arm: Correct ID_AA64ISAR1_EL1 value for neoverse-v1
* target/arm: More conversions to decodetree of A64 SIMD insns
* hw/char/stm32l4x5_usart.c: Enable USART ACK bit response
* tests: update aarch64/sbsa-ref tests
* kvm: minor Coverity nit fixes
* docs/devel: Remove nested-papr.txt

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmbsIloZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3k96EACgUaTSEX1BNee0Xsk8wIHb
# KebGryNymj7LPpWdRxiyQYmZbjfelZPJW7F2tr3iGfiphz+N5TIdRDQlPrRePNg4
# 5Ure0ShRgn+RlkjFe8r9yjrr3HEAXLnVb5fgzPqGEQ+UXWRVzr72+q+wrGFVuXtn
# zfqxpc6F0TCxeyH88X6mpKkTeEjfuE++TIf885VVX6nB8qkkDUifRLjdrDcJoxp3
# BRrE0Ntob2W0NAHm/QTbATLDErsYXIzm6pX2hWy3DNEQrVHw2rJ1FAzsjt2J/8ZU
# PC7hwmkPBsrnq5wcpBtOwloHzrIYuwUBI7ABPGctCPziCSw7N55vkgUmGWZ+nYHc
# DwYGu3H84su0hBi/E9gxl8z/ATBvuAIVa1RLHvbYiwdd088DqxdBe1YLLRaZeKzP
# oldQBzVegaN1n5n8tHO43b/38V7uknu3fDXGw/OrsO5DouDAj9NoRil1caRx4ZYd
# dr4IiWKzmlW8wpWgoBnrRbycuNsi6b9HblOX1umjwubCGO+GFesBRAInUeg9gbuv
# xolfYOScUE/nkTaqulAiPGqGZV8P0fqVMbXmXuowm7iIdw3JihEUm+mU18CTPFBd
# P/6SH47lXTaQA0JJQmD4LKraZQFYzm5rlSvW/15/mnzutZXMUlWzvxK/E5fX3vhL
# VUguR6XO8Cjb0cQJWohB1w==
# =JklH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Sep 2024 14:08:42 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240919' of https://git.linaro.org/people/pmaydell/qemu-arm: (38 commits)
docs/devel: Remove nested-papr.txt
target/arm: Correct ID_AA64ISAR1_EL1 value for neoverse-v1
kvm: Remove unreachable code in kvm_dirty_ring_reaper_thread()
kvm: Make 'mmap_size' be 'int' in kvm_init_vcpu(), do_kvm_destroy_vcpu()
tests: drop OpenBSD tests for aarch64/sbsa-ref
tests: expand timeout information for aarch64/sbsa-ref
tests: add FreeBSD tests for aarch64/sbsa-ref
tests: use default cpu for aarch64/sbsa-ref
hw/char/stm32l4x5_usart.c: Enable USART ACK bit response
target/arm: Convert scalar [US]QSHRN, [US]QRSHRN, SQSHRUN to decodetree
target/arm: Convert vector [US]QSHRN, [US]QRSHRN, SQSHRUN to decodetree
target/arm: Convert SQSHL, UQSHL, SQSHLU (immediate) to decodetree
target/arm: Widen NeonGenNarrowEnvFn return to 64 bits
target/arm: Convert VQSHL, VQSHLU to gvec
target/arm: Convert handle_scalar_simd_shli to decodetree
target/arm: Convert handle_scalar_simd_shri to decodetree
target/arm: Convert SHRN, RSHRN to decodetree
target/arm: Split out subroutines of handle_shri_with_rndacc
target/arm: Push tcg_rnd into handle_shri_with_rndacc
target/arm: Convert SSHLL, USHLL to decodetree
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Widen NeonGenNarrowEnvFn return to 64 bits

While these functions really do return a 32-bit value,
widening the return type means that we need do less
marshalling between TCG types.

Remo

target/arm: Widen NeonGenNarrowEnvFn return to 64 bits

While these functions really do return a 32-bit value,
widening the return type means that we need do less
marshalling between TCG types.

Remove NeonGenNarrowEnvFn typedef; add NeonGenOne64OpEnvFn.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240912024114.1097832-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert VQSHL, VQSHLU to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240912024114.1097832-26-

target/arm: Convert VQSHL, VQSHLU to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240912024114.1097832-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Introduce gen_gvec_sshr, gen_gvec_ushr

Handle the two special cases within these new
functions instead of higher in the call stack.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Introduce gen_gvec_sshr, gen_gvec_ushr

Handle the two special cases within these new
functions instead of higher in the call stack.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240912024114.1097832-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240813' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/misc/stm32l4x5_rcc: Add validation for MCOPRE and MCOSEL values
* target

Merge tag 'pull-target-arm-20240813' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/misc/stm32l4x5_rcc: Add validation for MCOPRE and MCOSEL values
* target/arm: Clear high SVE elements in handle_vec_simd_wshli
* target/arm: Fix usage of MMU indexes when EL3 is AArch32

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAma7eSIZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3gbJEACHhZAvP4f1vic8DNGPw8Yr
# v+pRQON+vF+PDBSyNkYCRL5Gy1P257Aujw1ed2dpoDhMemC/co67W2zdzToCvDd5
# XZxlHb/iUCTeZbA/Zp66ZADlvVOdvvQL8EHbd4mSBEZp9rvPSmxatx4I5jstLiAV
# 5HimP+AjjGMfklMu+RelW7A7WDRJ0h7F4PwXCA8tLeHPH5XHSkweGYt3OVfSlUAs
# +RKiltByC/quujLHxrQcVtLZON1KKiB0P8VPRcaR1QIFARiR1IfLvzhKVpqyOlnV
# 3a+ZILtCJE1YEM+h7Aunz/l9MQ0DZe5DzbIdKOQ7NUkerlhq81kriPp67yLv25lk
# zgqkHGGDEnIGpSXdmbXTNLcGlH+5O+fWl2RMzYrSFJqvwyRu9egLLi6E0xaNCRvY
# gdb6CGPhhu21C1o5Nax0CiaZe3vzzRvC5QsIJ0yww6y7VaGFVt/XRaKBdLHB97nZ
# t/9ifa3fmhVEW6pQEy8VdAeFoxIT2lJ2xJgBdMwpZCJlCxB8xKU/rZfrXKS/UUqV
# 9Klbcfrx1WFT7zrAWS0Ig7nPttJ+XgjYfgHI3q2e80F6xRmAmaAjnbtVRS+L3It9
# eZ4SmuzurWipRLpdmxdOX1IXdZD9rJMzk9IUIZoklctlR/D+75Iuy0N7gY8G2dbp
# fmh38lEQZ0IC90VmNtWltw==
# =So/3
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Aug 2024 01:17:54 AM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240813' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Fix usage of MMU indexes when EL3 is AArch32
target/arm: Update translation regime comment for new features
target/arm: Clear high SVE elements in handle_vec_simd_wshli
hw/misc/stm32l4x5_rcc: Add validation for MCOPRE and MCOSEL values

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/arm: Fix usage of MMU indexes when EL3 is AArch32

Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure

target/arm: Fix usage of MMU indexes when EL3 is AArch32

Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure PL1&0 translation regime:
* code at EL3, which might be Mon, or SVC, or any of the
other privileged modes (PL1)
* code at EL0 (Secure PL0)

This is different from when EL3 is AArch64, in which case EL3 is its
own translation regime, and EL1 and EL0 (whether AArch32 or AArch64)
have their own regime.

We claimed to be mapping Secure PL1 to our ARMMMUIdx_EL3, but didn't
do anything special about Secure PL0, which meant it used the same
ARMMMUIdx_EL10_0 that NonSecure PL0 does. This resulted in a bug
where arm_sctlr() incorrectly picked the NonSecure SCTLR as the
controlling register when in Secure PL0, which meant we were
spuriously generating alignment faults because we were looking at the
wrong SCTLR control bits.

The use of ARMMMUIdx_EL3 for Secure PL1 also resulted in the bug that
we wouldn't honour the PAN bit for Secure PL1, because there's no
equivalent _PAN mmu index for it.

We could fix this in one of two ways:
* The most straightforward is to add new MMU indexes EL30_0,
EL30_3, EL30_3_PAN to correspond to "Secure PL1&0 at PL0",
"Secure PL1&0 at PL1", and "Secure PL1&0 at PL1 with PAN".
This matches how we use indexes for the AArch64 regimes, and
preserves propirties like being able to determine the privilege
level from an MMU index without any other information. However
it would add two MMU indexes (we can share one with ARMMMUIdx_EL3),
and we are already using 14 of the 16 the core TLB code permits.

* The more complicated approach is the one we take here. We use
the same MMU indexes (E10_0, E10_1, E10_1_PAN) for Secure PL1&0
than we do for NonSecure PL1&0. This saves on MMU indexes, but
means we need to check in some places whether we're in the
Secure PL1&0 regime or not before we interpret an MMU index.

The changes in this commit were created by auditing all the places
where we use specific ARMMMUIdx_ values, and checking whether they
needed to be changed to handle the new index value usage.

Note for potential stable backports: taking also the previous
(comment-change-only) commit might make the backport easier.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2326
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240809160430.1144805-3-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20240812' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

* Fix BTI versus CF_PCREL
* include: Fix typo in name of MAKE_IDENTFIER macro
* docs: Various

Merge tag 'pull-target-arm-20240812' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

* Fix BTI versus CF_PCREL
* include: Fix typo in name of MAKE_IDENTFIER macro
* docs: Various txt-to-rST conversions
* hw/core/ptimer: fix timer zero period condition for freq > 1GHz
* arm/virt: place power button pin number on a define

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAma5+4wZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pX3D/9UVutdg5TsB9N8y5mPaVSn
# Yx0awBgxK5SHWeVgQJBkSdqh6LiGhhukR3VHfNanDELq24s0uLqLW86thgj+iB0H
# 51rnVHJtWtT9mIt0Qq9BlXX8+j0th6hELy/z+/aYdrWI1pmKsGYgF1gRh1vXrg+I
# 0s/S7kZY5CNDBbTXoBNtJfbZRe8fzyy5gUqc/tnw6Qonp8XM1OeG6sg/qF0KwzbB
# 8R7IvnY7gaBWm3daXqrFoxYuR+9i6F8uaFflOm+CarKQc9foH6KEzmfLAYLfGkFZ
# 2ZVHg3uC4k4OicyrpYcWsgumNTzOj8RTI4kV7M8NAj5TXCr+0pO6lnhlAKVGTWiL
# nJrW62dN56w8NVOzcy0tB0xqTHnKIxioGZyU4RDVKHjD/Fy0x7LX7KVmaBEZgyxJ
# oA4zY4KOrCNFsXQlqZgx38v/1hshnIYFN7V5AmfGEfbbKpBznKBQKmuyJ9VwSfGT
# jLwlwU4VMJPsj2Rs70seEl6obgyZicAXIAbqPgtMsvt3H2kKI2jtsNPFka3WaY62
# 0jOEbbFrsKV1//ZExBZdFhqBH/CoiZMvM4jsq1Y/oxAxIWtGv5dmJJsAA3w33YE4
# kNWXfHKAAhydZKeQloMgeOdLliP5UiCfF1FltwAWkLo59GV3TkjwagDU8+pWs9OF
# plOKWaKDUzkHq6G197uaBA==
# =ftoZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Aug 2024 10:09:48 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240812' of https://git.linaro.org/people/pmaydell/qemu-arm:
arm/virt: place power button pin number on a define
hw/core/ptimer: fix timer zero period condition for freq > 1GHz
docs: Typo fix in live disk backup
docs/interop/prl-xml.rst: Fix minor grammar nits
docs/interop/prl-xml.txt: Convert to rST
docs/interop/parallels.txt: Convert to rST
docs/interop/nbd.txt: Convert to rST
docs/specs/rocker.txt: Convert to rST
include: Fix typo in name of MAKE_IDENTFIER macro
target/arm: Fix BTI versus CF_PCREL

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/arm: Fix BTI versus CF_PCREL

With pcrel, we cannot check the guarded page bit at translation
time, as different mappings of the same physical page may or may
not have the GP bit set.

Instead

target/arm: Fix BTI versus CF_PCREL

With pcrel, we cannot check the guarded page bit at translation
time, as different mappings of the same physical page may or may
not have the GP bit set.

Instead, add a couple of helpers to check the page at runtime,
after all other filters that might obviate the need for the check.

The set_btype_for_br call must be moved after the gen_a64_set_pc
call to ensure the current pc can still be computed.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240802003028.795476-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240711' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Refactor FPCR/FPSR handling in preparation for FEAT_AFP
* More decodetree c

Merge tag 'pull-target-arm-20240711' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Refactor FPCR/FPSR handling in preparation for FEAT_AFP
* More decodetree conversions
* target/arm: Use cpu_env in cpu_untagged_addr
* target/arm: Set arm_v7m_tcg_ops cpu_exec_halt to arm_cpu_exec_halt()
* hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()
* hw/misc/bcm2835_thermal: Fix access size handling in bcm2835_thermal_ops
* accel/tcg: Make TCGCPUOps::cpu_exec_halt mandatory
* STM32L4x5: Handle USART interrupts correctly

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaP24MZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3luAEACF4Uhrcrh7E7RwoDEeQAMQ
# IG3+LwUbhnBXIUl7DL0qQTjnmwbbTQH2Ukoq3biqAdSs22JwrT6O6MDQ7fA3X8DI
# 3Ew+72BzAAtQHVHJaFRw2f9UVQop8Poa9I7Di6frH4Gxk5AKQY/IwjrD6jYPqhM7
# 9KCksksO3w9DRmpFZ1y5I/dGumTe12btEwdazWxrsyZIBNDoUJSU8xpcMk+9oErF
# 23hcsSaXOGDeWwPuEk1q2mMYnRQQtMhVndxV50sF98MfJ3nnMKEttuFuW0znXMCr
# Xat8Y4QbigXGmuJNgjXccIzN1Hje+h5zzfUIfVNWBYNzqULvvi/vjwNfJaUiIjm5
# DxeOGUu8iZYQbgvJXvn9NwWbptxvhyWsCLpB46icElcN0jr1MU12wk2IH0CZa7KU
# h4kbu0p17dph5Lantd888b1Vu3pOFr4UiRC3qJB9ddBVLyGl/3Km1wb99x038mPo
# Mt8Y7Vjnr5OWd+mTNzXFRnYFYIRKu1lI85VuTjd5Uua0lDtFDo/sVnVF9uas84OC
# /PrQYGso0UE320li+jYHzE18rKPEi2u/3xTgHWAgh3ra7McWVjWDr2yIsAisKKNH
# 2F72gyZNy2n7FJhTYPQAJnozi68maP5f9tHHHXQdfsCE4+2h0fr/wljCeq1+5waq
# 4edm31uEbArfW/jLgPHHAA==
# =Xkmk
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jul 2024 06:17:55 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240711' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits)
target/arm: Convert PMULL to decodetree
target/arm: Convert ADDHN, SUBHN, RADDHN, RSUBHN to decodetree
target/arm: Convert SADDW, SSUBW, UADDW, USUBW to decodetree
target/arm: Convert SQDMULL, SQDMLAL, SQDMLSL to decodetree
target/arm: Convert SADDL, SSUBL, SABDL, SABAL, and unsigned to decodetree
target/arm: Convert SMULL, UMULL, SMLAL, UMLAL, SMLSL, UMLSL to decodetree
hw/arm: In STM32L4x5 SOC, connect USART devices to EXTI
hw/misc: In STM32L4x5 EXTI, handle direct interrupts
hw/misc: In STM32L4x5 EXTI, consolidate 2 constants
accel/tcg: Make TCGCPUOps::cpu_exec_halt mandatory
target: Set TCGCPUOps::cpu_exec_halt to target's has_work implementation
target/arm: Set arm_v7m_tcg_ops cpu_exec_halt to arm_cpu_exec_halt()
target/arm: Use cpu_env in cpu_untagged_addr
hw/misc/bcm2835_thermal: Fix access size handling in bcm2835_thermal_ops
hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()
target/arm: Allow FPCR bits that aren't in FPSCR
target/arm: Rename FPSR_MASK and FPCR_MASK and define them symbolically
target/arm: Rename FPCR_ QC, NZCV macros to FPSR_
target/arm: Store FPSR and FPCR in separate CPU state fields
target/arm: Implement store_cpu_field_low32() macro
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/arm: Store FPSR and FPCR in separate CPU state fields

Now that we have refactored the set/get functions so that the FPSCR
format is no longer the authoritative one, we can keep FPSR and FPCR

target/arm: Store FPSR and FPCR in separate CPU state fields

Now that we have refactored the set/get functions so that the FPSCR
format is no longer the authoritative one, we can keep FPSR and FPCR
in separate CPU state fields.

As well as the get and set functions, we also have a scattering of
places in the code which directly access vfp.xregs[ARM_VFP_FPSCR] to
extract single fields which are stored there. These all change to
directly access either vfp.fpsr or vfp.fpcr, depending on the
location of the field. (Most commonly, this is the NZCV flags.)

We make the field in the CPU state struct 64 bits, because
architecturally FPSR and FPCR are 64 bits. However we leave the
types of the arguments and return values of the get/set functions as
32 bits, since we don't need to make that change with the current
architecture and various callsites would be unable to handle
set bits in the high half (for instance the gdbstub protocol
assumes they're only 32 bit registers).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-7-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20240531' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm:
* hw/intc/arm_gic: Fix set pending of PPIs
* hw/intc/arm_gic: Fix writes to GICD_IT

Merge tag 'pull-target-arm-20240531' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm:
* hw/intc/arm_gic: Fix set pending of PPIs
* hw/intc/arm_gic: Fix writes to GICD_ITARGETSRn
* xilinx_zynq: Add cache controller
* xilinx_zynq: Support up to two CPU cores
* tests/avocado: update sbsa-ref firmware
* sbsa-ref: move to Neoverse-N2 as default
* More decodetree conversion of A64 ASIMD insns
* docs/system/target-arm: Re-alphabetize board list
* Implement FEAT WFxT and enable for '-cpu max'
* hw/usb/hcd-ohci: Fix #1510, #303: pid not IN or OUT

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmZZvHgZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uArEACZgk0hqKtRcEzwdJi7w7ax
# ta/Iyl7AA+ngmh0qcE8QX8rzZhcGcKhsaQ8dNESMIBqVi1fS0hmNrIUWhXqmvNmZ
# 07WJvQx7Ki9YNX02frjkRZTwWozsbW8uoaXgnngFK93PNh/IoQBRP5T/LIZ5t3d7
# 7I/O/tnS/LZrL6wtP4EbRIEvZ4dfJe3X+uSCHSF8iOYrJLrZCsy/ItJqzY6Y0f96
# iUoOfXjrYH2hM9VkJGHIGy1r9nYRkCxXREQh7ahw/z6mv0nIB1YTS1eR0dH9D1yM
# afdby8iPN7k+f3en+2dHfyPjani4vPd1/k9mgLnQtVLOHrdw2APs1Q59YwYhunhe
# ZC0Fcp6jBSkcI6LHRY0bRtY0U3SBPrfkSD5sJrNH1obnsSvizeSU3uCq1QmKRCRY
# FuARmE77ywY8CURiqfwPSrC/ecSnamueIQNKNPZVQ5ve3dbokp/Gr1eJgcq80ovK
# wIKmNhJq60qBcj2zQ1aw1PP3+zvbZ/rl2j0abGbxBH3Kkp9AvALDiLRMciazVWph
# vbx7e1Y90Zrs3ap1AAUFUyWexYPNvZWmSGOaWv6Wdt+1Yf/YDW9wrwjVd3eRG9rM
# vgNMrccysBUNDpS4s0KSbqLy9AsjqAa41SiKipWFBekUyQFboNpTNfDNCspIPj9m
# dnI4fyXkVmSCYFiW2akmjg==
# =Jy5P
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 May 2024 05:03:04 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240531' of https://git.linaro.org/people/pmaydell/qemu-arm: (43 commits)
hw/usb/hcd-ohci: Fix #1510, #303: pid not IN or OUT
target/arm: Implement FEAT WFxT and enable for '-cpu max'
accel/tcg: Make TCGCPUOps::cpu_exec_halt return bool for whether to halt
docs/system/target-arm: Re-alphabetize board list
target/arm: Disable SVE extensions when SVE is disabled
target/arm: Convert FCSEL to decodetree
target/arm: Convert FMADD, FMSUB, FNMADD, FNMSUB to decodetree
target/arm: Convert SQDMULH, SQRDMULH to decodetree
target/arm: Tidy SQDMULH, SQRDMULH (vector)
target/arm: Convert MLA, MLS to decodetree
target/arm: Convert MUL, PMUL to decodetree
target/arm: Convert SABA, SABD, UABA, UABD to decodetree
target/arm: Convert SMAX, SMIN, UMAX, UMIN to decodetree
target/arm: Convert SRHADD, URHADD to decodetree
target/arm: Convert SRHADD, URHADD to gvec
target/arm: Convert SHSUB, UHSUB to decodetree
target/arm: Convert SHSUB, UHSUB to gvec
target/arm: Convert SHADD, UHADD to decodetree
target/arm: Convert SHADD, UHADD to gvec
target/arm: Use TCG_COND_TSTNE in gen_cmtst_vec
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/arm: Tidy SQDMULH, SQRDMULH (vector)

We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 t

target/arm: Tidy SQDMULH, SQRDMULH (vector)

We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 translators.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert SRHADD, URHADD to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-

target/arm: Convert SRHADD, URHADD to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert SHSUB, UHSUB to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-ri

target/arm: Convert SHSUB, UHSUB to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert SHADD, UHADD to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-ri

target/arm: Convert SHADD, UHADD to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert SQRSHL and UQRSHL (register) to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203

target/arm: Convert SQRSHL and UQRSHL (register) to gvec

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert SQSHL and UQSHL (register) to gvec

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2024052820304

target/arm: Convert SQSHL and UQSHL (register) to gvec

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert SRSHL and URSHL (register) to gvec

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2024052820304

target/arm: Convert SRSHL and URSHL (register) to gvec

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Inline scalar SQADD, UQADD, SQSUB, UQSUB

This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.

Reviewed-by: Peter May

target/arm: Inline scalar SQADD, UQADD, SQSUB, UQSUB

This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240528' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* xlnx_dpdma: fix descriptor endianness bug
* hvf: arm: Fix encodings for ID_

Merge tag 'pull-target-arm-20240528' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* xlnx_dpdma: fix descriptor endianness bug
* hvf: arm: Fix encodings for ID_AA64PFR1_EL1 and debug System registers
* hw/arm/npcm7xx: remove setting of mp-affinity
* hw/char: Correct STM32L4x5 usart register CR2 field ADD_0 size
* hw/intc/arm_gic: Fix handling of NS view of GICC_APR<n>
* hw/input/tsc2005: Fix -Wchar-subscripts warning in tsc2005_txrx()
* hw: arm: Remove use of tabs in some source files
* docs/system: Remove ADC from raspi documentation
* target/arm: Start of the conversion of A64 SIMD to decodetree

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmZV5HsZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3j+CD/9V5kC3DJtovMiolr1z8YYI
# eRj0I/pKacgIzz9kVwzo+UVVgzXAi80VFO7xbe+aucCKs0c2s3wrUnUWkAaGHUYR
# DKhRIp017HKW8esgDVQsItn2030PLQLlhxpLvhSfN7NR2jHiJdE914Kb3h6XIEVE
# CqMRaYt9Vrh5o0e51VSzzccFK+kyYV1MDvNyx1/8F4KJpsMFeK0iy9WYrXx2UxlT
# dlrJZdrShIkOWiQB+bi6zQzjMveNmDicjBCgnC7TO2ayOl0AD24sNg/Z49w+4Hjb
# azUDYR45uuyQD5HJLyBsk5BcYhfyZttn2U5uTvNQ6SEfMuKUFEfdoSebTHngEb6t
# ObOdJW6+GmyaIaaJS99ea8u8jbe1r5zhQGJEBeEWOyGYTKUJ6Q0J+g6dZUdgniOp
# bvORX4qnIlMLMGGYT34410Wf0lsE88BHspcVX0WLGFLMZcEYsHhdgG6/f0p8D3nD
# m3R5+/BxUHK7A6OVe/1YU6jTqnfPBY6CGKSqEvXbJGlPp7LAjIxuUHBRxRnXU+Ad
# ohBwOIEEDNhGnEiiHFFK+wrc8BncXY4eSiJBCLlRaf1AcxCT6ibWXuUlpnWeAwNk
# E3Kmvq9BCdQZpIj7EsyvngTc5PsQrqK0FNIVuSVi38QQnqS/0oykvsPzgSlD6blP
# zcFIgG7aUiPOkdTxcPTYnA==
# =TjtM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 May 2024 07:04:43 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240528' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits)
target/arm: Convert disas_simd_3same_logic to decodetree
target/arm: Convert FMLAL, FMLSL to decodetree
target/arm: Use gvec for neon pmax, pmin
target/arm: Convert SMAXP, SMINP, UMAXP, UMINP to decodetree
target/arm: Use gvec for neon padd
target/arm: Convert ADDP to decodetree
target/arm: Use gvec for neon faddp, fmaxp, fminp
target/arm: Convert FMAXP, FMINP, FMAXNMP, FMINNMP to decodetree
target/arm: Convert FADDP to decodetree
target/arm: Convert FRECPS, FRSQRTS to decodetree
target/arm: Convert FABD to decodetree
target/arm: Convert FCMEQ, FCMGE, FCMGT, FACGE, FACGT to decodetree
target/arm: Convert FMLA, FMLS to decodetree
target/arm: Convert FNMUL to decodetree
target/arm: Expand vfp neg and abs inline
target/arm: Introduce vfp_load_reg16
target/arm: Convert FMAX, FMIN, FMAXNM, FMINNM to decodetree
target/arm: Convert FADD, FSUB, FDIV, FMUL to decodetree
target/arm: Convert FMULX to decodetree
target/arm: Convert Advanced SIMD copy to decodetree
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/arm: Convert SMAXP, SMINP, UMAXP, UMINP to decodetree

These are the last instructions within handle_simd_3same_pair
so remove it.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed

target/arm: Convert SMAXP, SMINP, UMAXP, UMINP to decodetree

These are the last instructions within handle_simd_3same_pair
so remove it.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert ADDP to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-rich

target/arm: Convert ADDP to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...