target/arm: Add new MMU indexes for AArch32 Secure PL1&0

Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure

target/arm: Add new MMU indexes for AArch32 Secure PL1&0

Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure PL1&0 translation regime:
* code at EL3, which might be Mon, or SVC, or any of the
other privileged modes (PL1)
* code at EL0 (Secure PL0)

This is different from when EL3 is AArch64, in which case EL3 is its
own translation regime, and EL1 and EL0 (whether AArch32 or AArch64)
have their own regime.

We claimed to be mapping Secure PL1 to our ARMMMUIdx_EL3, but didn't
do anything special about Secure PL0, which meant it used the same
ARMMMUIdx_EL10_0 that NonSecure PL0 does. This resulted in a bug
where arm_sctlr() incorrectly picked the NonSecure SCTLR as the
controlling register when in Secure PL0, which meant we were
spuriously generating alignment faults because we were looking at the
wrong SCTLR control bits.

The use of ARMMMUIdx_EL3 for Secure PL1 also resulted in the bug that
we wouldn't honour the PAN bit for Secure PL1, because there's no
equivalent _PAN mmu index for it.

Fix this by adding two new MMU indexes:
* ARMMMUIdx_E30_0 is for Secure PL0
* ARMMMUIdx_E30_3_PAN is for Secure PL1 when PAN is enabled
The existing ARMMMUIdx_E3 is used to mean "Secure PL1 without PAN"
(and would be named ARMMMUIdx_E30_3 in an AArch32-centric scheme).

These extra two indexes bring us up to the maximum of 16 that the
core code can currently support.

This commit:
* adds the new MMU index handling to the various places
where we deal in MMU index values
* adds assertions that we aren't AArch32 EL3 in a couple of
places that currently use the E10 indexes, to document why
they don't also need to handle the E30 indexes
* documents in a comment why regime_has_2_ranges() doesn't need
updating

Notes for backporting: this commit depends on the preceding revert of
4c2c04746932; that revert and this commit should probably be
backported to everywhere that we originally backported 4c2c04746932.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2326
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2588
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241101142845.1712482-3-peter.maydell@linaro.org
(cherry picked from commit efbe180ad2ed75d4cc64dfc6fb46a015eef713d1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'pull-target-arm-20241105' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Fix MMU indexes for AArch32 Secure PL1&0 in a less complex and buggy way
*

Merge tag 'pull-target-arm-20241105' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Fix MMU indexes for AArch32 Secure PL1&0 in a less complex and buggy way
* Fix SVE SDOT/UDOT/USDOT (4-way, indexed)
* softfloat: set 2-operand NaN propagation rule at runtime
* disas: Fix build against Capstone v6 (again)
* hw/rtc/ds1338: Trace send and receive operations
* hw/timer/imx_gpt: Convert DPRINTF to trace events
* hw/watchdog/wdt_imx2: Remove redundant assignment
* hw/sensor/tmp105: Convert printf() to trace event, add tracing for read/write access
* hw/net/npcm_gmac: Change error log to trace event
* target/arm: Enable FEAT_CMOW for -cpu max

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmcp/yoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3ucMD/9pWk2ETLjdviPxlacs5IoM
# HvGn8Ll2BSMbeb4YdJc7oZ4YJchGpgHhocEwZuaU9HheWjSg+ZEbyhZgN4DdkT8J
# pYr+Rl0MgDNN219kYnO/yqnqlgHbtUpE7y57Li3ApoGNbWAVxsH0xoT45Lpi7DOd
# uvJfIy/xdaT3zu/4uBjj7c2VrD8wntEayLM8hpqlgeQZKRG3Wtlk/xrQFKOHPDPO
# MDbsGoc2FyogRQoo6WH+J6gkkR9PhqXe6Hbf6WIr1/uffZUZU4M8leSw2DgxrYHo
# Zf36AzttwO4GHyML/5SR7uvzfXl7OkGyjedLGCUa7INc3br2+GvLMltdLGGPM9cc
# ckMHOWd9ZQuSxcpbtPkSYRG0McRE1GLT+KV3BNOLnN9AJl3qv5Qa55iPrtpB08vX
# 3jN6H964w99+NoSB2tTHszpep+M7SRuw5QLsuk3tC/qnBMpzKRwZjGVUegNUtfi/
# Lg5ExF8B62K+xb5j5FmODbbXZmb5AD0rV2MGRIVHjiHdnf7J2FmWUJCe2sYFRnRm
# nzszhdOKw4PBhC2fb6Vb/DwCqdQy9vcITWpWBtcjkV5mAPhcBo/VNKNeKoc/tPNS
# H8FIFIJbtv5aIixqtKcUBUmrBCYy4EoiRMLkqfC09VW60wtWswAP4KBQxi1ogehV
# jJw8AgSLCl2MsVmyzgleZQ==
# =Woag
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 05 Nov 2024 11:19:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20241105' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
target/arm: Enable FEAT_CMOW for -cpu max
hw/net/npcm_gmac: Change error log to trace event
hw/sensor/tmp105: Convert printf() to trace event, add tracing for read/write access
hw/watchdog/wdt_imx2: Remove redundant assignment
hw/timer/imx_gpt: Convert DPRINTF to trace events
hw/rtc/ds1338: Trace send and receive operations
disas: Fix build against Capstone v6 (again)
target/arm: Fix SVE SDOT/UDOT/USDOT (4-way, indexed)
target/arm: Add new MMU indexes for AArch32 Secure PL1&0
Revert "target/arm: Fix usage of MMU indexes when EL3 is AArch32"
softfloat: Remove fallback rule from pickNaN()
target/rx: Explicitly set 2-NaN propagation rule
target/openrisc: Explicitly set 2-NaN propagation rule
target/microblaze: Explicitly set 2-NaN propagation rule
target/microblaze: Move setting of float rounding mode to reset
target/alpha: Explicitly set 2-NaN propagation rule
target/i386: Set 2-NaN propagation rule explicitly
target/xtensa: Explicitly set 2-NaN propagation rule
target/xtensa: Factor out calls to set_use_first_nan()
target/sparc: Explicitly set 2-NaN propagation rule
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Add new MMU indexes for AArch32 Secure PL1&0

Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure

target/arm: Add new MMU indexes for AArch32 Secure PL1&0

Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure PL1&0 translation regime:
* code at EL3, which might be Mon, or SVC, or any of the
other privileged modes (PL1)
* code at EL0 (Secure PL0)

This is different from when EL3 is AArch64, in which case EL3 is its
own translation regime, and EL1 and EL0 (whether AArch32 or AArch64)
have their own regime.

We claimed to be mapping Secure PL1 to our ARMMMUIdx_EL3, but didn't
do anything special about Secure PL0, which meant it used the same
ARMMMUIdx_EL10_0 that NonSecure PL0 does. This resulted in a bug
where arm_sctlr() incorrectly picked the NonSecure SCTLR as the
controlling register when in Secure PL0, which meant we were
spuriously generating alignment faults because we were looking at the
wrong SCTLR control bits.

The use of ARMMMUIdx_EL3 for Secure PL1 also resulted in the bug that
we wouldn't honour the PAN bit for Secure PL1, because there's no
equivalent _PAN mmu index for it.

Fix this by adding two new MMU indexes:
* ARMMMUIdx_E30_0 is for Secure PL0
* ARMMMUIdx_E30_3_PAN is for Secure PL1 when PAN is enabled
The existing ARMMMUIdx_E3 is used to mean "Secure PL1 without PAN"
(and would be named ARMMMUIdx_E30_3 in an AArch32-centric scheme).

These extra two indexes bring us up to the maximum of 16 that the
core code can currently support.

This commit:
* adds the new MMU index handling to the various places
where we deal in MMU index values
* adds assertions that we aren't AArch32 EL3 in a couple of
places that currently use the E10 indexes, to document why
they don't also need to handle the E30 indexes
* documents in a comment why regime_has_2_ranges() doesn't need
updating

Notes for backporting: this commit depends on the preceding revert of
4c2c04746932; that revert and this commit should probably be
backported to everywhere that we originally backported 4c2c04746932.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2326
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2588
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241101142845.1712482-3-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20240531' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm:
* hw/intc/arm_gic: Fix set pending of PPIs
* hw/intc/arm_gic: Fix writes to GICD_IT

Merge tag 'pull-target-arm-20240531' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm:
* hw/intc/arm_gic: Fix set pending of PPIs
* hw/intc/arm_gic: Fix writes to GICD_ITARGETSRn
* xilinx_zynq: Add cache controller
* xilinx_zynq: Support up to two CPU cores
* tests/avocado: update sbsa-ref firmware
* sbsa-ref: move to Neoverse-N2 as default
* More decodetree conversion of A64 ASIMD insns
* docs/system/target-arm: Re-alphabetize board list
* Implement FEAT WFxT and enable for '-cpu max'
* hw/usb/hcd-ohci: Fix #1510, #303: pid not IN or OUT

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmZZvHgZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uArEACZgk0hqKtRcEzwdJi7w7ax
# ta/Iyl7AA+ngmh0qcE8QX8rzZhcGcKhsaQ8dNESMIBqVi1fS0hmNrIUWhXqmvNmZ
# 07WJvQx7Ki9YNX02frjkRZTwWozsbW8uoaXgnngFK93PNh/IoQBRP5T/LIZ5t3d7
# 7I/O/tnS/LZrL6wtP4EbRIEvZ4dfJe3X+uSCHSF8iOYrJLrZCsy/ItJqzY6Y0f96
# iUoOfXjrYH2hM9VkJGHIGy1r9nYRkCxXREQh7ahw/z6mv0nIB1YTS1eR0dH9D1yM
# afdby8iPN7k+f3en+2dHfyPjani4vPd1/k9mgLnQtVLOHrdw2APs1Q59YwYhunhe
# ZC0Fcp6jBSkcI6LHRY0bRtY0U3SBPrfkSD5sJrNH1obnsSvizeSU3uCq1QmKRCRY
# FuARmE77ywY8CURiqfwPSrC/ecSnamueIQNKNPZVQ5ve3dbokp/Gr1eJgcq80ovK
# wIKmNhJq60qBcj2zQ1aw1PP3+zvbZ/rl2j0abGbxBH3Kkp9AvALDiLRMciazVWph
# vbx7e1Y90Zrs3ap1AAUFUyWexYPNvZWmSGOaWv6Wdt+1Yf/YDW9wrwjVd3eRG9rM
# vgNMrccysBUNDpS4s0KSbqLy9AsjqAa41SiKipWFBekUyQFboNpTNfDNCspIPj9m
# dnI4fyXkVmSCYFiW2akmjg==
# =Jy5P
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 May 2024 05:03:04 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240531' of https://git.linaro.org/people/pmaydell/qemu-arm: (43 commits)
hw/usb/hcd-ohci: Fix #1510, #303: pid not IN or OUT
target/arm: Implement FEAT WFxT and enable for '-cpu max'
accel/tcg: Make TCGCPUOps::cpu_exec_halt return bool for whether to halt
docs/system/target-arm: Re-alphabetize board list
target/arm: Disable SVE extensions when SVE is disabled
target/arm: Convert FCSEL to decodetree
target/arm: Convert FMADD, FMSUB, FNMADD, FNMSUB to decodetree
target/arm: Convert SQDMULH, SQRDMULH to decodetree
target/arm: Tidy SQDMULH, SQRDMULH (vector)
target/arm: Convert MLA, MLS to decodetree
target/arm: Convert MUL, PMUL to decodetree
target/arm: Convert SABA, SABD, UABA, UABD to decodetree
target/arm: Convert SMAX, SMIN, UMAX, UMIN to decodetree
target/arm: Convert SRHADD, URHADD to decodetree
target/arm: Convert SRHADD, URHADD to gvec
target/arm: Convert SHSUB, UHSUB to decodetree
target/arm: Convert SHSUB, UHSUB to gvec
target/arm: Convert SHADD, UHADD to decodetree
target/arm: Convert SHADD, UHADD to gvec
target/arm: Use TCG_COND_TSTNE in gen_cmtst_vec
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/arm: Implement FEAT WFxT and enable for '-cpu max'

FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in

target/arm: Implement FEAT WFxT and enable for '-cpu max'

FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.

We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.

We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20240215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC
* linux-user/aarch64: Choos

Merge tag 'pull-target-arm-20240215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC
* linux-user/aarch64: Choose SYNC as the preferred MTE mode
* Fix some errors in SVE/SME handling of MTE tags
* hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses
* hw/block/tc58128: Don't emit deprecation warning under qtest
* tests/qtest: Fix handling of npcm7xx and GMAC tests
* hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ
* tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend
* Don't assert on vmload/vmsave of M-profile CPUs
* hw/arm/smmuv3: add support for stage 1 access fault
* hw/arm/stellaris: QOM cleanups
* Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs
* Improve Cortex_R52 IMPDEF sysreg modelling
* Allow access to SPSR_hyp from hyp mode
* New board model mps3-an536 (Cortex-R52)

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXOStQZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vlDD/9HCq1B6e4hWQBlHrWG5nCK
# zBYRZ3GuuYCFB9FJt4EyXjUZ8ohDhLrpXvjhzSF6IqoPo0c0rQnfipeuj8Lu/hAV
# JrtHE4jQnE5Q9dwSz3A6oh0z5iIkFB/C1hW6fBDwvgAJUZ5xh5MBcxOvKq1s3WKv
# 3JngHC/KJrjgIKbcCV3Nd+OdyIZ7QZNXPwcBX9Zzt2eDkdEzOjcJYF4lisWdGav5
# JVXUeCXtClmFUZrxiGCLeTxb5X+TptxC+kAcPC7F5GjtVSy2800Z9sit2FTqd9Vd
# Y+rdA5IIBbZWPQ3OOHbaR69X4tWmc+BIT3nbQlESfV3odg0toQhe7aqn9UPIEU0K
# JRrzfodD7r7HK36lZm7ehmevLQnZgO6+MYL4Wrr0pUCNUxqVYlIyaqfsFSaknRg1
# 85L6agJlPYxtvrQtfhIV5m1V3IfyIiC7ECqMFe+QLdbR0ZxS3sI7sJ3O58xmcbDm
# SGVLl+xjAW3ZdgOb+k4B/BlPqasiJpuLe7So2e+cvDWN7OM0iJBxFAVz3yhJKGTP
# t9adJ1j0SI9XNrRuQkCX1T07Ciiuvr/mM4eY6YK+6TOq1zXks9st51ydbvEKdNW9
# YMFpWwUbYKKmUTEW06Xg5iNatse5kp4MUASF5BERkaGuyhRqLl/8p6jt6Q+9/D1S
# 5y8MFjUcdg8t4KcSJgdopw==
# =X+zR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 15 Feb 2024 17:33:08 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240215' of https://git.linaro.org/people/pmaydell/qemu-arm: (35 commits)
docs: Add documentation for the mps3-an536 board
hw/arm/mps3r: Add remaining devices
hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices
hw/arm/mps3r: Add UARTs
hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM
hw/arm/mps3r: Initial skeleton for mps3-an536 board
hw/misc/mps2-scc: Make changes needed for AN536 FPGA image
hw/misc/mps2-scc: Factor out which-board conditionals
hw/misc/mps2-scc: Fix condition for CFG3 register
target/arm: Allow access to SPSR_hyp from hyp mode
target/arm: Add Cortex-R52 IMPDEF sysregs
target/arm: The Cortex-R52 has a read-only CBAR
target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs
hw/arm/stellaris: Add missing QOM 'SoC' parent
hw/arm/stellaris: Add missing QOM 'machine' parent
hw/arm/stellaris: Convert I2C controller to Resettable interface
hw/arm/stellaris: Convert ADC controller to Resettable interface
hw/arm/smmuv3: add support for stage 1 access fault
tests/qtest: Fix GMAC test to run on a machine in upstream QEMU
target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Allow access to SPSR_hyp from hyp mode

Architecturally, the AArch32 MSR/MRS to/from banked register
instructions are UNPREDICTABLE for attempts to access a banked
register that the guest

target/arm: Allow access to SPSR_hyp from hyp mode

Architecturally, the AArch32 MSR/MRS to/from banked register
instructions are UNPREDICTABLE for attempts to access a banked
register that the guest could access in a more direct way (e.g.
using this insn to access r8_fiq when already in FIQ mode). QEMU has
chosen to UNDEF on all of these.

However, for the case of accessing SPSR_hyp from hyp mode, it turns
out that real hardware permits this, with the same effect as if the
guest had directly written to SPSR. Further, there is some
guest code out there that assumes it can do this, because it
happens to work on hardware: an example Cortex-R52 startup code
fragment uses this, and it got copied into various other places,
including Zephyr. Zephyr was fixed to not use this:
https://github.com/zephyrproject-rtos/zephyr/issues/47330
but other examples are still out there, like the selftest
binary for the MPS3-AN536.

For convenience of being able to run guest code, permit
this UNPREDICTABLE access instead of UNDEFing it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-5-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Emulate FEAT_NV, FEAT_NV2
* add cache controller for Freescale i.MX6
* Add

Merge tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Emulate FEAT_NV, FEAT_NV2
* add cache controller for Freescale i.MX6
* Add minimal support for the B-L475E-IOT01A board
* Allow SoC models to configure M-profile CPUs with correct number
of NVIC priority bits
* Add missing QOM parent for v7-M SoCs
* Set CTR_EL0.{IDC,DIC} for the 'max' CPU
* hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWfypMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sleD/4tQOMteba5BNMDns6R96E4
# kj5q0Iy9XyzQ486Q4cIZXI5N3BddCp2ks8WeS2W3w4IT/lms0U6UwXV4E98I4I/b
# KSfOoUd/cp8IvdvzfpWbmQcPMoauHZdCUN33pYYXOjfi1RkpzgNU5Qgh09Nl/xYU
# V3oaEvWhLtepT/fwJLYxoqVHDaEmyW+6zriF0+eGjZvkhgPyhllla9eti7AyHTfH
# T3A4Fyx/wudRE3NP6xsLfxldriJTxQeba+TqLSh3IXn/PMtK13/ARsY/hl72Q4ML
# Fgad8Zho4eXbuOQ9oiqb7gp4K3IKd9/8FbCzECoIAq7AnLAD4KwpLQR8GULRvYW3
# 0eQq2txTXQWNcmWpIyDRRME+qeNVwWSk+QJDs5WuhVqlVQ4hpqtgFf1EX+7ORdS1
# WG0fb8etvr8oCSkzCmP/o6xYGJ0EyTVMU5DmWviy3bxMrUMcmobjvCQr/n2gC713
# 1NDmEaYPbl+pX8EMu8byst7/No2PXRgIO0UVVb4KZybfhNy+BBs+LiMVlSRS5YH4
# 8NWtoYZlG9RcPnY+8Xrxz9VTi2cNAAcdbf5uK3snJxkFV2SmV3oBoMxWen3mee0f
# 2PNVEbt9zvPV8hViBVLsqRhVXd9wMq6motIRlkKge1u1TvwIxO21ibykI3tvYOGv
# BffIjhUdnYtX90JAtXtFDw==
# =yQwf
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 11:01:39 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm: (41 commits)
target/arm: Add FEAT_NV2 to max, neoverse-n2, neoverse-v1 CPUs
target/arm: Enhance CPU_LOG_INT to show SPSR on AArch64 exception-entry
target/arm: Report HCR_EL2.{NV,NV1,NV2} in cpu dumps
hw/intc/arm_gicv3_cpuif: Mark up VNCR offsets for GIC CPU registers
target/arm: Mark up VNCR offsets (offsets >= 0x200, except GIC)
target/arm: Mark up VNCR offsets (offsets 0x168..0x1f8)
target/arm: Mark up VNCR offsets (offsets 0x100..0x160)
target/arm: Mark up VNCR offsets (offsets 0x0..0xff)
target/arm: Report VNCR_EL2 based faults correctly
target/arm: Implement FEAT_NV2 redirection of sysregs to RAM
target/arm: Handle FEAT_NV2 redirection of SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2
target/arm: Handle FEAT_NV2 changes to when SPSR_EL1.M reports EL2
target/arm: Implement VNCR_EL2 register
target/arm: Handle HCR_EL2 accesses for FEAT_NV2 bits
target/arm: Add FEAT_NV to max, neoverse-n2, neoverse-v1 CPUs
target/arm: Handle FEAT_NV page table attribute changes
target/arm: Treat LDTR* and STTR* as LDR/STR when NV, NV1 is 1, 1
target/arm: Don't honour PSTATE.PAN when HCR_EL2.{NV, NV1} == {1, 1}
target/arm: Always use arm_pan_enabled() when checking if PAN is enabled
target/arm: Trap registers when HCR_EL2.{NV, NV1} == {1, 1}
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Always honour HCR_EL2.TSC when HCR_EL2.NV is set

The HCR_EL2.TSC trap for trapping EL1 execution of SMC instructions
has a behaviour change for FEAT_NV when EL3 is not implemented:

* i

target/arm: Always honour HCR_EL2.TSC when HCR_EL2.NV is set

The HCR_EL2.TSC trap for trapping EL1 execution of SMC instructions
has a behaviour change for FEAT_NV when EL3 is not implemented:

* in older architecture versions TSC was required to have no
effect (i.e. the SMC insn UNDEFs)
* with FEAT_NV, when HCR_EL2.NV == 1 the trap must apply
(i.e. SMC traps to EL2, as it already does in all cases when
EL3 is implemented)
* in newer architecture versions, the behaviour either without
FEAT_NV or with FEAT_NV and HCR_EL2.NV == 0 is relaxed to
an IMPDEF choice between UNDEF and trap-to-EL2 (i.e. it is
permitted to always honour HCR_EL2.TSC) for AArch64 only

Add the condition to honour the trap bit when HCR_EL2.NV == 1. We
leave the HCR_EL2.NV == 0 case with the existing (UNDEF) behaviour,
as our IMPDEF choice (both because it avoids a behaviour change
for older CPU models and because we'd have to distinguish AArch32
from AArch64 if we opted to trap to EL2).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>

show more ...

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmWcJMUACgkQnKSrs4Gr
# c

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmWcJMUACgkQnKSrs4Gr
# c8hh/Qf/Wt177UlhBR49OWmmegs8c8yS1mhyawo7YIJM4pqoXCYLaACpcKECXcGU
# rlgyR4ow68EXnnU8+/s2cp2UqHxrla+E2eNqBoTDmkNt3Cko5sJn5G5PM5EYK+mO
# JjFRzn7awRyxD6mGOuaMVoj6OuHbAA/U4JF7FhW0YuRl8v0/mvAxRSfQ4U6Crq/y
# 19Aa1CXHD1GH2CUJsMCY8zT47Dr4DJcvZx5IpcDFaHaYDCkktFwNzdo5IDnCx2M2
# xnP37Qp/Q93cu12lWkVOu8HCT6yhoszahyOqlBxDmo7QeGkskrxGbMyE+vHM3fFI
# aGSxiw193U7/QWu+Cq2/727C3YIq1g==
# =pKUb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 08 Jan 2024 16:37:25 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
Rename "QEMU global mutex" to "BQL" in comments and docs
Replace "iothread lock" with "BQL" in comments
qemu/main-loop: rename qemu_cond_wait_iothread() to qemu_cond_wait_bql()
qemu/main-loop: rename QEMU_IOTHREAD_LOCK_GUARD to BQL_LOCK_GUARD
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()
iothread: Remove unused Error** argument in aio_context_set_aio_params

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()

The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonl

system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()

The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().

The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.

The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)

There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge tag 'pull-target-arm-20231219' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* arm/kvm: drop the split between "common KVM support" and
"64-bit KVM supp

Merge tag 'pull-target-arm-20231219' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* arm/kvm: drop the split between "common KVM support" and
"64-bit KVM support", since 32-bit Arm KVM no longer exists
* arm/kvm: clean up APIs to be consistent about CPU arguments
* Don't implement *32_EL2 registers when EL1 is AArch64 only
* Restrict DC CVAP & DC CVADP instructions to TCG accel
* Restrict TCG specific helpers
* Propagate MDCR_EL2.HPMN into PMCR_EL0.N
* Include missing 'exec/exec-all.h' header
* fsl-imx: add simple RTC emulation for i.MX6 and i.MX7 boards

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWB6o0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3mxMEACRpRxJ81pLs8fFYC5BgRhU
# BCxr+ZqarBygzsH9YWUN2TFFKlEZi7mLu6lzFsfN/qEmYCg8VslPbulQHqcGkx51
# kVxXFp/KuGlKt4zGRagZUJxgYAwwU5mnK6dTZT5/ZF6yWX67dXn8V7MP9lqqEPw5
# 5gut7Mu4f7MiAQbwZY1CWP+iu5uZmdsBuKxA6zkxOWJh/A1SfaqQRO6xVQttLAxS
# DPMTpQGmwPS4I+3gGNnqlSu6etp2tdy2K0cW3fhMp6hx70uNMHmFNzRhT/6TaKka
# 9AqXQsFHQiFXDGAm6PmCvfQI6KpLljDyNL/TuUkQWi72bGEHjUsJAdG0aXVOa30W
# uC7vuJkdZrP/t5P1AkZhWQUrlawDRV2YHNDD+gY4fxJL/STkGyU6M8R1nm1J+InN
# n0SeK0VHRC6DRPXCMQhC5QwKUH6ZjFZRs/r2opTu9p+ThQAQRmZBiVfdISCDMYnN
# DCiSb78gIFaUkwtiP44qq8MJQjsHnXtTD1Akqyo2fXSKs66jDK9Gnc8gENYdpghe
# 7V36bOp6scROHOB2a/r8gT42RKzSN6uh6xByaaToza63/bPgvHnn8vvQQbB01AgX
# zJC1xs3dwY8JMyqDefda0K0NDPS8TzNsXYmgxxxcQJpUvB4VVjet9VIMF3T+d8HO
# Pas41Z1gsQY+rcaRk/9mPA==
# =GWIA
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Dec 2023 14:10:05 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20231219' of https://git.linaro.org/people/pmaydell/qemu-arm: (43 commits)
fsl-imx: add simple RTC emulation for i.MX6 and i.MX7 boards
target/arm/helper: Propagate MDCR_EL2.HPMN into PMCR_EL0.N
target/arm/tcg: Including missing 'exec/exec-all.h' header
target/arm: Restrict DC CVAP & DC CVADP instructions to TCG accel
target/arm: Restrict TCG specific helpers
target/arm: Don't implement *32_EL2 registers when EL1 is AArch64 only
target/arm/kvm: Have kvm_arm_hw_debug_active take a ARMCPU argument
target/arm/kvm: Have kvm_arm_handle_debug take a ARMCPU argument
target/arm/kvm: Have kvm_arm_handle_dabt_nisv take a ARMCPU argument
target/arm/kvm: Have kvm_arm_verify_ext_dabt_pending take a ARMCPU arg
target/arm/kvm: Have kvm_arm_[get|put]_virtual_time take ARMCPU argument
target/arm/kvm: Have kvm_arm_vcpu_finalize take a ARMCPU argument
target/arm/kvm: Have kvm_arm_vcpu_init take a ARMCPU argument
target/arm/kvm: Have kvm_arm_pmu_set_irq take a ARMCPU argument
target/arm/kvm: Have kvm_arm_pmu_init take a ARMCPU argument
target/arm/kvm: Have kvm_arm_pvtime_init take a ARMCPU argument
target/arm/kvm: Have kvm_arm_set_device_attr take a ARMCPU argument
target/arm/kvm: Have kvm_arm_sve_get_vls take a ARMCPU argument
target/arm/kvm: Have kvm_arm_sve_set_vls take a ARMCPU argument
target/arm/kvm: Have kvm_arm_add_vcpu_properties take a ARMCPU argument
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/arm: Restrict TCG specific helpers

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231130142519.28417-2-p

target/arm: Restrict TCG specific helpers

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231130142519.28417-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20231027' of https://git-us.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Correct minor errors in Cortex-A710 definition
* Implement Neoverse N2 C

Merge tag 'pull-target-arm-20231027' of https://git-us.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Correct minor errors in Cortex-A710 definition
* Implement Neoverse N2 CPU model
* Refactor feature test functions out into separate header
* Fix syndrome for FGT traps on ERET
* Remove 'hw/arm/boot.h' includes from various header files
* pxa2xx: Refactoring/cleanup
* Avoid using 'first_cpu' when first ARM CPU is reachable
* misc/led: LED state is set opposite of what is expected
* hw/net/cadence_gen: clean up to use FIELD macros
* hw/net/cadence_gem: perform PHY access on write only
* hw/net/cadence_gem: enforce 32 bits variable size for CRC

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmU7yz0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3n4xEACK4ti+PFSJHVCQ69NzLLBT
# ybFGFMsMhXJTSNS30Pzs+KWCKWPP59knYBD4qO43W1iV6pPUhy+skr+BFCCRvBow
# se74+Fm1l4LmnuHxgukJzTdvRffI3v37alLn6Y/ioWe8bDpf/IJj8WLj8B1IPoNg
# fswJSGDLpPMovaz8NBQRzglUWpfyzxH+uuW779qBS1nuFdPOfIHKrocvvdrfogBP
# aO8AeiBzz5STW9Naeq+BIKho8S9LinSB6FHa+rRPUDkWx03lvRIvkgGPzHpXYy8I
# zAZ8gUQZyXprHAHMpnoBv8Wcw3Bwc2f+8xx8hnRRki3iBroXKfJA9NkeN0StQmL1
# ZHhfYkiKSS5diIFW5pX6ZixKbXHE2a4aH4zPVUNQriNWOevhe7n82mAPNFIYjk97
# ciTtd4I2oew48sDLSodMiirGL987Mit7KC23itVGezcNfQ9FnVTDmuGy8Rq52BZm
# u4TZjVBrtjQOdMBUcD2hKvXhikQNAdOhArPwNfOr0esSQL44MMEe+6Q5/Cbp0BOE
# stAY/xwSP2cY5mIPnAbIBELseEZsV8ySA3M0y1iRCJptjwbyWM+s1TYz0iXcqeOn
# l6LfiI6r1BqUeoWLGP4042R4FLyLNh6gU/TiFNLu7JJQjXl/EkRgqVXWYfzy2n51
# KKY6iGFi5r41sAU6GIXOkQ==
# =szC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 27 Oct 2023 23:37:49 JST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20231027' of https://git-us.linaro.org/people/pmaydell/qemu-arm: (41 commits)
hw/net/cadence_gem: enforce 32 bits variable size for CRC
hw/net/cadence_gem: perform PHY access on write only
hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields
hw/net/cadence_gem: use FIELD to describe DESCONF6 register fields
hw/net/cadence_gem: use FIELD to describe IRQ register fields
hw/net/cadence_gem: use FIELD to describe [TX|RX]STATUS register fields
hw/net/cadence_gem: use FIELD to describe DMACFG register fields
hw/net/cadence_gem: use FIELD to describe NWCFG register fields
hw/net/cadence_gem: use FIELD to describe NWCTRL register fields
hw/net/cadence_gem: use FIELD for screening registers
hw/net/cadence_gem: use REG32 macro for register definitions
misc/led: LED state is set opposite of what is expected
hw/arm: Avoid using 'first_cpu' when first ARM CPU is reachable
hw/arm/pxa2xx: Realize PXA2XX_I2C device before accessing it
hw/intc/pxa2xx: Factor pxa2xx_pic_realize() out of pxa2xx_pic_init()
hw/intc/pxa2xx: Pass CPU reference using QOM link property
hw/intc/pxa2xx: Convert to Resettable interface
hw/pcmcia/pxa2xx: Inline pxa2xx_pcmcia_init()
hw/pcmcia/pxa2xx: Do not open-code sysbus_create_simple()
hw/pcmcia/pxa2xx: Realize sysbus device before accessing it
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/arm: Move feature test functions to their own header

The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot

target/arm: Move feature test functions to their own header

The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20230908' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* New CPU type: cortex-a710
* Implement new architectural features:
- FEA

Merge tag 'pull-target-arm-20230908' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* New CPU type: cortex-a710
* Implement new architectural features:
- FEAT_PACQARMA3
- FEAT_EPAC
- FEAT_Pauth2
- FEAT_FPAC
- FEAT_FPACCOMBINE
- FEAT_TIDCP1
* Xilinx Versal: Model the CFU/CFI
* Implement RMR_ELx registers
* Implement handling of HCR_EL2.TIDCP trap bit
* arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
* hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte()
* target/arm: Do not use gen_mte_checkN in trans_STGP
* arm64: Restore trapless ptimer access

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmT7VEkZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3v7BEACENUKCxsFHRQSLmQkoBCT9
# Lc4SJrGCbVUC6b+4s5ligZSWIoFzp/kY6NPpeRYqFa0DCxozd2T5D81/j7TpSo0C
# wUFkZfUq1nGFJ4K5arYcDwhdTtJvvc07YrSbUqufBp6uNGqhR4YmDWPECqBfOlaj
# 7bgJM6axsg7FkJJh5zp4cQ4WEfp14MHWRPQWpVTI+9cxNmNymokSVRBhVFkM0Wen
# WD4C/nYud8bOxpDfR8GkIqJ+UnUMhUNEhp28QmHdwywgg0zLWOE4ysIxo55cM0+0
# FL3q45PL2e4S24UUx9dkxDBWnKEZ5qpQpPn9F6EhWzfm3n2dqr4uUnfWAEOg6NAi
# vnGS9MlL7nZo69OM3h8g7yKDfTKYm2vl9HVZ0ytFA6PLoSnaQyQwli58qnLtiid3
# 17MWPoNQlq6G8tHUTPkrJjdA8XLz0iNPXe5G2kwhuM/S0Lv7ORzDc2pq4qBYLvIw
# 9nV0oUWqzyE7zH6bRKxbbPw2sMI7c8qQr9QRyZeLHL7HdcY5ExvX9FH+qii5JDR/
# fZohi1pBoNNwYYTeSRnxgHiQ7OizYq0xQJhrdqcFF9voytZj1yZEZ0mp6Tq0/CIj
# YkC/vEyLYBqgrJ2JeUjbV3h1RIzQcVaXxnxwGsyMyceACd6MNMmdbjR7bZk0lNIu
# kh+aFEdKajPp56UseJiKBQ==
# =5Shq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 08 Sep 2023 13:05:13 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230908' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
target/arm: Enable SCTLR_EL1.TIDCP for user-only
target/arm: Implement FEAT_TIDCP1
target/arm: Implement HCR_EL2.TIDCP
target/arm: Implement cortex-a710
target/arm: Implement RMR_ELx
arm64: Restore trapless ptimer access
target/arm: Do not use gen_mte_checkN in trans_STGP
hw/arm/versal: Connect the CFRAME_REG and CFRAME_BCAST_REG
hw/arm/xlnx-versal: Connect the CFU_APB, CFU_FDRO and CFU_SFR
hw/misc: Introduce a model of Xilinx Versal's CFRAME_BCAST_REG
hw/misc: Introduce a model of Xilinx Versal's CFRAME_REG
hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal's CFU_SFR
hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal CFU_FDRO
hw/misc: Introduce a model of Xilinx Versal's CFU_APB
hw/misc: Introduce the Xilinx CFI interface
hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte()
target/arm: Implement FEAT_FPAC and FEAT_FPACCOMBINE
target/arm: Inform helpers whether a PAC instruction is 'combined'
target/arm: Implement FEAT_Pauth2
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/arm: Implement FEAT_TIDCP1

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.ma

target/arm: Implement FEAT_TIDCP1

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Implement HCR_EL2.TIDCP

Perform the check for EL2 enabled in the security space and the
TIDCP bit in an out-of-line helper.

Signed-off-by: Richard Henderson <richard.henderson@linaro.or

target/arm: Implement HCR_EL2.TIDCP

Perform the check for EL2 enabled in the security space and the
TIDCP bit in an out-of-line helper.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Various code cleanups
* More refactoring working towards allowing a build

Merge tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Various code cleanups
* More refactoring working towards allowing a build
without CONFIG_TCG

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmP8ty0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3na0EACToAEGC4/iFigdKD7ZwG3F
# FvoDcMRRSdElcSo7BTDrFBBOH5/BYhorUq+mVpPvEYADXNaPOCmXWieSJpu68sJC
# VpVLPMhGS8lTsT16C2vB/4Lh4t8pJgs7aej90nqKk2rGgKw4ZNwMS+7Eg6n2lKf/
# V27+O+drJxgYzO6feveuKtIQXsHkx4//DNOCDPLLvrrOk+1NWnyPyT/UDxV/emyr
# KLBbeXqcNhPkn7xZtvM7WARSHZcqhEPBkIAJG2H9HE4imxNm8d8ADZjEMbfE9ZNE
# MDanpM6BYYDWw4y2A8J5QmbiLu3znH8RWmWHww1v6UQ7qyBCLx+HyEGKipGd3Eoe
# 48hi/ktsAJUb1lRrk9gOJ+NsokGINzI5urFOReUh1q6+5us0Q0VpwjyVvhi8REy3
# 5gOMDC7O2zH+bLN08kseDXfc7vR9wLrIHqMloMgJzpjG5KcL67nVCPHcOwxe0sfn
# 0SYWUY0UFNSYgEGBG6JfM6LiM1lRREzlw6YnnaJ+GUf/jdIUbMV6PKpL34TGLeQ3
# xEWrKV0+PMoWHwN0Pdo1tMXm7mc/9H27Mf7hB5k0Hp3dfQ7nIdkfnFA2YEUSxIQt
# OXYsKLTJmO/4XIAYCHhIOncPTmM6KWNQajDJMIuEdYYV67Xb88EIv5Hg8q6tS/mN
# uuQfun3Z2UbAtGvzN5Yx1w==
# =K0Vo
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 13:59:09 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm: (25 commits)
hw: Replace qemu_or_irq typedef by OrIRQState
hw/or-irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
hw/irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
iothread: Remove unused IOThreadClass / IOTHREAD_CLASS
hw/arm/musicpal: Remove unused dummy MemoryRegion
hw/intc/armv7m_nvic: Use QOM cast CPU() macro
hw/timer/cmsdk-apb-timer: Remove unused 'qdev-properties.h' header
hw/char/cmsdk-apb-uart: Open-code cmsdk_apb_uart_create()
hw/char/xilinx_uartlite: Open-code xilinx_uartlite_create()
hw/char/xilinx_uartlite: Expose XILINX_UARTLITE QOM type
hw/char/pl011: Open-code pl011_luminary_create()
hw/char/pl011: Un-inline pl011_create()
hw/gpio/max7310: Simplify max7310_realize()
tests/avocado: add machine:none tag to version.py
cpu-defs.h: Expose CPUTLBEntryFull to non-TCG code
target/arm: Don't access TCG code when debugging with KVM
target/arm: Move regime_using_lpae_format into internal.h
target/arm: Move hflags code into the tcg directory
target/arm: Wrap arm_rebuild_hflags calls with tcg_enabled
target/arm: Move psci.c into the tcg directory
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: move helpers to tcg/

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Review

target/arm: move helpers to tcg/

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...