Merge tag 'migration-20240621-pull-request' of https://gitlab.com/farosas/qemu into staging

Migration pull request

- Fabiano's fix for fdset + file migration truncating the migration
file

- Fabi

Merge tag 'migration-20240621-pull-request' of https://gitlab.com/farosas/qemu into staging

Migration pull request

- Fabiano's fix for fdset + file migration truncating the migration
file

- Fabiano's fdset + direct-io support for mapped-ram

- Peter's various cleanups (multifd sync, thread names, migration
states, tests)

- Peter's new migration state postcopy-recover-setup

- Philippe's unused vmstate macro cleanup

# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmZ1vIsQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnVZTEACdFIsQ/PJw2C9eeLNor5B5MNSEqUjxX0KN
# 6s/uTkJ/dcv+2PI92SzRCZ1dpR5e9AyjTFYbLc9tPRBIROEhlUaoc84iyEy0jCFU
# eJ65/RQbH5QHRpOZwbN5RmGwnapfOWHGTn3bpdrmSQTOAy8R2TPGY4SVYR+gamTn
# bAv1cAsrOOBUfCi8aqvSlmvuliOW0lzJdF4XHa3mAaigLoF14JdwUZdyIMP1mLDp
# /fllbHCKCvJ1vprE9hQmptBR9PzveJZOZamIVt96djJr5+C869+9PMCn3a5vxqNW
# b+/LhOZjac37Ecg5kgbq+cO1E4EXKC3zWOmDTw8kHUwp9oYNi1upwLdpHbAAZaQD
# /JmHKsExx9QuV8mrVyGBXMI92E6RrT54b1Bjcuo63gAP8p9JRRxGT22U3LghNbTm
# 1XcGPR3rswjT1yTgE6qAqAIMR+7X5MrJVWop9ub/lF5DQ1VYIwmlKSNdwDHFDhRq
# 0F1k2+EksNpcZ0BH2+3iFml7qKHLVupLQKTWcLdrlnQnTfSG3+yW7eyA5Mte79Qp
# nJPcHt8qBqUVQ9Uf/4490TM4Lrp+T+m16exIi0tISLaDXSVkFJnlowipSm+tQ7U3
# Sm68JWdWWEsXZVaMqJeBE8nA/hCoQDpo4hVdwftStI+NayXbRX/EgvPqrNAvwh+c
# i4AdHdn6hQ==
# =ZX0p
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Jun 2024 10:46:51 AM PDT
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D

* tag 'migration-20240621-pull-request' of https://gitlab.com/farosas/qemu: (28 commits)
migration: Remove unused VMSTATE_ARRAY_TEST() macro
tests/migration-tests: Cover postcopy failure on reconnect
tests/migration-tests: Verify postcopy-recover-setup status
tests/migration-tests: migration_event_wait()
tests/migration-tests: Always enable migration events
tests/migration-tests: Drop most WIN32 ifdefs for postcopy failure tests
migration/docs: Update postcopy recover session for SETUP phase
migration/postcopy: Add postcopy-recover-setup phase
migration: Cleanup incoming migration setup state change
migration: Use MigrationStatus instead of int
migration: Rename thread debug names
migration/multifd: Avoid the final FLUSH in complete()
tests/qtest/migration: Add a test for mapped-ram with passing of fds
migration: Add documentation for fdset with multifd + file
monitor: fdset: Match against O_DIRECT
tests/qtest/migration: Add tests for file migration with direct-io
migration/multifd: Add direct-io support
migration: Add direct-io parameter
io: Stop using qemu_open_old in channel-file
monitor: Report errors from monitor_fdset_dup_fd_add
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

monitor: Stop removing non-duplicated fds

monitor_fdsets_cleanup() currently has three responsibilities:

1- Remove the fds that have been marked for removal(->removed=true) by
qmp_remove_fd(). T

monitor: Stop removing non-duplicated fds

monitor_fdsets_cleanup() currently has three responsibilities:

1- Remove the fds that have been marked for removal(->removed=true) by
qmp_remove_fd(). This is overly complicated, but ok.

2- Remove any file descriptors that have been passed into QEMU and
never duplicated[1,2]. A file descriptor without duplicates
indicates that no part of QEMU has made use of it. This is
problematic because the current implementation does it only if the
guest is not running and the monitor is closed.

3- Remove/free fdsets that have become empty due to the above
removals. This is ok.

The scenario described in (2) is starting to show some cracks now that
we're trying to consume fds from the migration code:

- Doing cleanup every time the last monitor connection closes works to
reap unused fds, but also has the side effect of forcing the
management layer to pass the file descriptors again in case of a
disconnect/re-connect, if that happened to be the only monitor
connection.

Another side effect is that removing an fd with qmp_remove_fd() is
effectively delayed until the last monitor connection closes.

The usage of mon_refcount is also problematic because it's racy.

- Checking runstate_is_running() skips the cleanup unless the VM is
running and avoids premature cleanup of the fds, but also has the
side effect of blocking the legitimate removal of an fd via
qmp_remove_fd() if the VM happens to be in another state.

This affects qmp_remove_fd() and qmp_query_fdsets() in particular
because requesting a removal at a bad time (guest stopped) might
cause an fd to never be removed, or to be removed at a much later
point in time, causing the query command to continue showing the
supposedly removed fd/fdset.

Note that file descriptors that *have* been duplicated are owned by
the code that uses them and will be removed after qemu_close() is
called. Therefore we've decided that the best course of action to
avoid the undesired side-effects is to stop managing non-duplicated
file descriptors.

1- efb87c1697 ("monitor: Clean up fd sets on monitor disconnect")
2- ebe52b592d ("monitor: Prevent removing fd from set during init")

Reviewed-by: Peter Xu <peterx@redhat.com>
[fix logic mistake: s/fdset_free/fdset_free_if_empty]
Signed-off-by: Fabiano Rosas <farosas@suse.de>

show more ...

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* hot-unplug fixes for ioport
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* hot-unplug fixes for ioport
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
# bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
# LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
# CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
# 3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
# na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
# =A5Lp
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 May 2023 01:21:37 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
monitor: do not use mb_read/mb_set
monitor: extract request dequeuing to a new function
monitor: introduce qmp_dispatcher_co_wake
monitor: cleanup fetching of QMP requests
monitor: cleanup detection of qmp_dispatcher_co shutting down
monitor: do not use mb_read/mb_set for suspend_cnt
monitor: add more *_locked() functions
monitor: allow calling monitor_resume under mon_lock
monitor: use QEMU_LOCK_GUARD a bit more
softmmu/ioport.c: make MemoryRegionPortioList owner of portio_list MemoryRegions
softmmu/ioport.c: QOMify MemoryRegionPortioList
softmmu/ioport.c: allocate MemoryRegionPortioList ports on the heap
usb/ohci: Set pad to 0 after frame update
meson: move -no-pie from linker to compiler
meson: fix rule for qemu-ga installer
meson.build: Fix glib -Wno-unused-function workaround
target/i386: EPYC-Rome model without XSAVES

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

monitor: do not use mb_read/mb_set for suspend_cnt

Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).

monitor: do not use mb_read/mb_set for suspend_cnt

Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).

The only remaining case of reading suspend_cnt is in the can_read
callback, which is just advisory and can use qatomic_read.

As an extra benefit, mux_out is now simply protected by mon_lock.
Also, moving the prompt to the beginning of the main loop removes
it from the output in some error cases where QEMU does not actually
start successfully. It is not a full fix and it would be nice to
also remove the monitor heading, but this is already a small (though
unintentional) improvement.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possi

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRH0b0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y0yw/6A/vzA4TGgFUP3WIvH/sQri4/V3gyR+PT
# u3hOQUCYZ99nioTpKV91TSuUPuU/Mdspy/0NKM+K92yIXqxa9172A2zLOsGOu21l
# qKpse+nBf1zqEgB8YzUHyCBdetPz916C/f9RS26SNUCW85GCHYGHA3u7nKvWLMyV
# oKIoTlA8QOglOuEKlRoYh7hCFm7ET51NOSEftm8GsYbsW/I2Vzl8a1SHN1lHufjd
# We3+898zUrmFqNMp6Rjdhn+yZmmoGzoZqV4YQi83z7xjiv+Ms4VHVVW7X8d20xRX
# 5BLFiLHAuZ/1d26HyVhgBUr7KHyf94odocz8BylWKXGl5SXMCZun1Td1vgVKlGK+
# GRxzB2cWGWqzC2UmqSTc0Z0aIWbXukKwvcX76uBKsQZ+kB2A7jFobxHiaoQEDJ8B
# WRNEMH2+CqCAu9rsrNRinnJKhT2nXcr9F9YfwRIlagdAePGWin+EUW8huf14dDBm
# Z2Y34aKW4RQibF8xirMHeRBbOLmcq2VpKLKwNfBHUDgZB8iuD7bLn4n9nwWXMG1w
# zgNsTybkv46vLPamTpEaUoNTHfuRDTAuE7Z7lkcc7jF41Z0V1DC/DCCWcL/0LvhP
# GIxFdkYug3hetdF2U/OZhUoEfxvkqcuBnrr55LFzqheKEllQpPwPpt7UF0aH8bg3
# i/YpjHsf3xU=
# =mpYX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 02:12:29 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (25 commits)
block/monitor: Fix crash when executing HMP commit
vmdk: make vmdk_is_cid_valid a coroutine_fn
qcow2: mark various functions as coroutine_fn and GRAPH_RDLOCK
tests: mark more coroutine_fns
qemu-pr-helper: mark more coroutine_fns
9pfs: mark more coroutine_fns
nbd: mark more coroutine_fns, do not use co_wrappers
mirror: make mirror_flush a coroutine_fn, do not use co_wrappers
blkdebug: add missing coroutine_fn annotation
vvfat: mark various functions as coroutine_fn
thread-pool: avoid passing the pool parameter every time
thread-pool: use ThreadPool from the running thread
io_uring: use LuringState from the running thread
linux-aio: use LinuxAioState from the running thread
block: add missing coroutine_fn to bdrv_sum_allocated_file_size()
include/block: fixup typos
monitor: convert monitor_cleanup() to AIO_WAIT_WHILE_UNLOCKED()
hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_drain_all_begin() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_graph_wrlock() to AIO_WAIT_WHILE_UNLOCKED()
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()

The HMP monitor runs in the main loop thread. Calling
AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is
equivale

hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()

The HMP monitor runs in the main loop thread. Calling
AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is
equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks
the AioContext and the latter's assertion that we're in the main loop
succeeds.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-6-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

readline: fix hmp completion issue

The auto completion does not work in some cases.

Case 1.

1. (qemu) info reg
2. Press 'Tab'.
3. It does not auto complete.

Case 2.

1. (qemu) block_resize flo
2.

readline: fix hmp completion issue

The auto completion does not work in some cases.

Case 1.

1. (qemu) info reg
2. Press 'Tab'.
3. It does not auto complete.

Case 2.

1. (qemu) block_resize flo
2. Press 'Tab'.
3. It does not auto complete 'floppy0'.

Since the readline_add_completion_of() may add any completion when
strlen(pfx) is zero, we remove the check with (name[0] == '\0') because
strlen() always returns zero in that case.

Fixes: 52f50b1e9f8f ("readline: Extract readline_add_completion_of() from monitor")
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge tag 'pull-monitor-2023-03-02' of https://repo.or.cz/qemu/armbru into staging

Monitor patches for 2023-03-02

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmQ

Merge tag 'pull-monitor-2023-03-02' of https://repo.or.cz/qemu/armbru into staging

Monitor patches for 2023-03-02

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmQASV0SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZT4mEQALkbu0i/Y2B2XKpGyp9Z/uf0zoHmL6fA
# UEy2S8yn3K1uPPDmzWsQ7PgxDnirVzePa88UzuW3iUiiHBcQp0IsFOP6LZ47NTTz
# UM146odlDtn50bHWr6vHtToNU+PcKOw8ELX28eDE+ihtg+8B+B6cBgLa14VKGSJ4
# 4oBJbsNMG8U3qJgqrIMomBeP38TorTdKq05jEE9txqsiw5uYO6jQE9owNkLQP76U
# 8T/99sgQzyQjJ7VjOdyu2ZveUwGIpmGzmeA26CcwYP8uhYTRY+Lk+5gZnC15pad9
# TMimrq+7vwuzqKQpZw5rZO25ryQmKgQX49hSt/dKZEFNvb9vtKq693VhRoP4EMCz
# 136suIATRkXHTw2FhjC2l3lnN+rQEfTr+zuGvazQ9ZOibHFPhxOAR4RNPTFXbfk6
# fOM7wW2Y3lhlQdhLc+0Ar2N/GzjEHi4WJhk4nV0V1PK79dLPYA5kuYGUuqzeA04P
# Fu1EvpNWgHpQd3m8oFxjfozn9LMDohUrdHknrF0+VncAfzcPic1z4VhKDg+kMLJx
# 1WePIMdMMS/aIYpNCMevLm11GQXhd2B4GG3xhNpM/BfHQ9KLM1dfoTEGfG9ZpKNv
# Qyi1ofpgKzX5mpSHrdACK/rm45KIJRbprGgAe3fZFh65iGQ51wwZd16MUV/c8exN
# ouu3jimfHWWG
# =RuRo
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 06:59:41 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* tag 'pull-monitor-2023-03-02' of https://repo.or.cz/qemu/armbru:
target/ppc: Restrict 'qapi-commands-machine.h' to system emulation
target/loongarch: Restrict 'qapi-commands-machine.h' to system emulation
target/i386: Restrict 'qapi-commands-machine.h' to system emulation
target/arm: Restrict 'qapi-commands-machine.h' to system emulation
readline: fix hmp completion issue

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

readline: fix hmp completion issue

The auto completion does not work in some cases.

Case 1.

1. (qemu) info reg
2. Press 'Tab'.
3. It does not auto complete.

Case 2.

1. (qemu) block_resize flo
2.

readline: fix hmp completion issue

The auto completion does not work in some cases.

Case 1.

1. (qemu) info reg
2. Press 'Tab'.
3. It does not auto complete.

Case 2.

1. (qemu) block_resize flo
2. Press 'Tab'.
3. It does not auto complete 'floppy0'.

Since the readline_add_completion_of() may add any completion when
strlen(pfx) is zero, we remove the check with (name[0] == '\0') because
strlen() always returns zero in that case.

Fixes: 52f50b1e9f8f ("readline: Extract readline_add_completion_of() from monitor")
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230207045241.8843-1-dongli.zhang@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru into staging

Monitor patches for 2023-02-03

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMF

Merge tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru into staging

Monitor patches for 2023-02-03

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPeAkgSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTUagP/iZ24jXaWoFOKaO70wdQ/tdoQObWZnUV
# 8xJNJYmYYbWoiq9wQXHebi/yEgBudso1lLzAnp8lsF12ybnNV1zsjyV/yumEKSNW
# 3nL1NZIcuY9IDmCe97clY9nm9H2lUhjjyCG3gnjg+uC3JjlSjO/T8lbkdT+fYnkR
# AInVTCPYFjSO9MIOhN0WNIY73HlAjr4zx5TEgS/D4pFj6iGq2qEniSDGMRf+/fVr
# uSbIXbQlum+VAdxbGMSVf8yQPlNcFUXUpSJrbgJE272H6saQuvn5mkwD0RcYXyaI
# OlfXpATDRNTsP3yYImxgr7y29Exo1HnCuC6T1n/+fwkirtMR3a7X6XjaQwFsWcrx
# xxGiHQOve3r/I3DAO6A64T2ceD/XuI43LygqkkljfuoXifnJz7Lo39P9HrY0dhpC
# KSld2n/Vv4xYyykvqAzpvzijwq679ILIbTplhm9gOrfrDRZjWad3uLAcYxsTXXR8
# BQbHGovcAzTOEx/0Quo3NThpAeNYPGyrPz3xBIV+XtPJGWvFsrA/s/po4qWDTmF6
# UTzPoEmznsD+DRboNOKfinCsOnpTAru4gbXevi7sfmMHQbLYN5xgsrF7WdlaxWa6
# 4QbJyNUq0O+aL0gyfVLuiZBCQ32Jaz1WvowK856Yl4jwczP5HM0ujyyM75+Kx072
# PdnMgxYYLSij
# =d+wL
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 04 Feb 2023 06:59:20 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru: (35 commits)
monitor: Rename misc.c to hmp-target.c
monitor: Loosen coupling between misc.c and monitor.c slightly
monitor: Move remaining QMP stuff from misc.c to qmp-cmds.c
monitor: Move remaining HMP commands from misc.c to hmp-cmds.c
monitor: Move target-dependent HMP commands to hmp-cmds-target.c
monitor: Move monitor_putc() next to monitor_puts & external linkage
monitor: Split file descriptor passing stuff off misc.c
qdev: Move HMP command completion from monitor to softmmu/
acpi: Move the QMP command from monitor/ to hw/acpi/
stats: Move HMP commands from monitor/ to stats/
stats: Move QMP commands from monitor/ to stats/
runstate: Move HMP commands from monitor/ to softmmu/
tpm: Move HMP commands from monitor/ to softmmu/
virtio: Move HMP commands from monitor/ to hw/virtio/
migration: Move the QMP command from monitor/ to migration/
migration: Move HMP commands from monitor/ to migration/
net: Move hmp_info_network() to net-hmp-cmds.c
net: Move HMP commands from monitor to net/
hmp: Rewrite strlist_from_comma_list() as hmp_split_at_comma()
rocker: Move HMP commands from monitor to hw/net/rocker/
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hmp: Rename help_cmd() to hmp_help_cmd(), move declaration to hmp.h

The next commit will move a caller of help_cmd() to a new file.
Including monitor/monitor-internal.h there just for help_cmd() fee

hmp: Rename help_cmd() to hmp_help_cmd(), move declaration to hmp.h

The next commit will move a caller of help_cmd() to a new file.
Including monitor/monitor-internal.h there just for help_cmd() feels
silly. Better to provide it in monitor/hmp.h suitably renamed.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-8-armbru@redhat.com>

show more ...

readline: Extract readline_add_completion_of() from monitor

monitor/misc.h has static add_completion_option(). It's useful
elsewhere in the monitor. Since it's not monitor-specific, move it to
uti

readline: Extract readline_add_completion_of() from monitor

monitor/misc.h has static add_completion_option(). It's useful
elsewhere in the monitor. Since it's not monitor-specific, move it to
util/readline.c renamed to readline_add_completion_of(), and put it to
use.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-7-armbru@redhat.com>

show more ...

monitor: Drop unnecessary includes

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-2-armbru@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>

Merge tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu into staging

testing, gdbstub, plugin and gitdm updates

- cleanup scripts/ci/setup in advance of ppc64 r

Merge tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu into staging

testing, gdbstub, plugin and gitdm updates

- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
# KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
# 918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
# TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
# b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
# tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
# 0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
# =1vZ4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Oct 2022 06:54:30 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu: (52 commits)
plugins: add [pre|post]fork helpers to linux-user
contrib/gitdm: add Université Grenoble Alpes
contrib/gitdm: add Simon to individual contributors
contrib/gitdm: add China Telecom to the domain map
contrib/gitdm: add ISCAS to the academics group
contrib/gitdm: add WANG Xuerui to individual contributers
contrib/gitdm: add Paul to individual contributors
contrib/gitdm: add mapping for Loongson Technology
accel/kvm: move kvm_update_guest_debug to inline stub
gdbstub: move guest debug support check to ops
gdbstub: move breakpoint logic to accel ops
gdbstub: move sstep flags probing into AccelClass
gdbstub: move into its own sub directory
semihosting: update link to spec
docs/devel: document the test plugins
contrib/plugins: reset skip when matching in execlog
docs/devel: move API to end of tcg-plugins.rst
docs/devel: clean-up qemu invocations in tcg-plugins
plugins: Assert mmu_idx in range before use in qemu_plugin_get_hwaddr
plugins: extend execlog to filter matches
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

monitor: expose monitor_puts to rest of code

This helps us construct strings elsewhere before echoing to the
monitor. It avoids having to jump through hoops like:

monitor_printf(mon, "%s", s->str

monitor: expose monitor_puts to rest of code

This helps us construct strings elsewhere before echoing to the
monitor. It avoids having to jump through hoops like:

monitor_printf(mon, "%s", s->str);

It will be useful in following patches but for now convert all
existing plain "%s" printfs to use the _puts api.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>

show more ...

Merge tag 'pull-hmp-20220915a' of https://gitlab.com/dagrh/qemu into staging

HMP pull 2022-09-15

A set of 3 small additions/fixes.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# --

Merge tag 'pull-hmp-20220915a' of https://gitlab.com/dagrh/qemu into staging

HMP pull 2022-09-15

A set of 3 small additions/fixes.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmMjNG4ACgkQBRYzHrxb
# /edRhhAAibHXFdK1EHtcABInxMVg50wZ7oD2QiYqKb1m0t9rQDSmZ/cX22qdYF7D
# hBvjsMiniy6isGYyiPhpi+7ZMnid12E6EpZ49tFKbDz+DPfpT3mk/MOKvNQu150I
# K8NuqD40HImpUzo7/OVVIzo26TsKMFUo7WzuzqP4PEguSCqVAlzuoVxId8oZ3DbT
# c/VQTZjwLbi+i7DuuFc1pqfzC3euNEApM7DRAYNios+oGxd2kd+DC7JLqMKK4Uk1
# 5t5YmCz3Q+aFZ1kOvpxUW+3xT0LI4wzR0XA0ImA3jADaqt5G3dNOzosY2E7eaQen
# AXpqu6dH5wbSl2y5LWSscgN8ObAs5N6n0+ncXtIYwMENBBkZpWtaDbTYp6ezcrww
# 2st2qQ0MlUj8oiH3jMr5TtkZxcx9wXdEfrCDZ0MQt3275Bp6JuSW6DjqXjjpKimY
# 2HsAPDKYFNVJl/9SX5PxW6cGPZyb/YMa+14YdIdMbWc8+q+4yMSQnTJbGvxLFakt
# S/agxGu3hpEGrYUjCdl6JzIyOxdUVFp+Lp4NwhU+DI/1UaL1/QbiK+NxDXvkk+Wp
# wcI7VbIXb6YMWf9Gmv4NQ1b4uTf8qoA7J0SNONrw9ywU4lhsm9UKoIoakKaSK9F8
# kI+vBt/mmZTCqNw8h4w/KNvrRFF5nP/vw117xdOGGbtCS7G8438=
# =Isyw
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 15 Sep 2022 10:19:26 EDT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* tag 'pull-hmp-20220915a' of https://gitlab.com/dagrh/qemu:
hmp: Fix ordering of text
monitor/hmp: print trace as option in help for log command
monitor: Support specified vCPU registers

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

monitor/hmp: print trace as option in help for log command

The below is printed when printing help information in qemu-system-x86_64
command line, and when CONFIG_TRACE_LOG is enabled:

------------

monitor/hmp: print trace as option in help for log command

The below is printed when printing help information in qemu-system-x86_64
command line, and when CONFIG_TRACE_LOG is enabled:

----------------------------
$ qemu-system-x86_64 -d help
... ...
trace:PATTERN enable trace events

Use "-d trace:help" to get a list of trace events.
----------------------------

However, the options of "trace:PATTERN" are only printed by
"qemu-system-x86_64 -d help", but missing in hmp "help log" command.

Fixes: c84ea00dc2 ("log: add "-d trace:PATTERN"")
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20220831213943.8155-1-dongli.zhang@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu into staging

Misc cleanups

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmJhYIscHG1hcmNhbmRy
# Z

Merge tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu into staging

Misc cleanups

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmJhYIscHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5W0jD/43n8PL2cv42lq6OaIS
# OYN9vfW9xgA9THZiUH4xEHYreZh+KofmY1PbJn1n7q+v6DecBiqM4fZr1LY8X3PM
# xRUH0l4gjXwYwX2cSSo5UTZ/PF248Uoo3tUE3vgMFkYghHMjKcTtaSkYEPGHf2nR
# t3m1qLG9w9YPhVg7PNCntjUKi+w2TtcrRVzP7V7XyFc1HrAoT0ys6KaBBrXMbcjz
# SxTRbcwSq+6aPjQIn0RWp8Hp1HkdNjegB98dkyqRLlVaugHZWPYDXDQTgVziQlX8
# dU8YrlvTOtDWwsNP6awWnW6/IjKuJjGR0wT3QKwi8JAZ0YV3egwEKoQRUAyHtnn2
# FkSMYgmJcF0ai1aIJFAx+3PIzCfS49lKXA0t303DtY3hRR9JKGMwaV2do9Wm2irt
# o7T1lKKN7R7R8Q3U4OsatYMYm7KYL07NEDiQCPloGvCo27ezkAWCKXAw1mRUkxKF
# jKwJPcnOUq21Jp6tpjsR8ifSw70jBSEWQSGqhXnDhZhx2C2/Qqkg2I8DagLiPger
# kYxbQ13LTG0R25YHa1r3UmzuD+HpZOM8XoLJc5yun/1UrwyR9ghHrOoxkSnRT2Ks
# QFn//xQ2SzUnGBNzNSMfTk8vzludxSWfFnOjkviF6E2Elnw3p8f/kOQRAft5dMBY
# ftgoy2yLone3HpKfjuOriicIzg==
# =0GLo
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 06:47:55 AM PDT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]

* tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu: (30 commits)
qga: use fixed-length and GDateTime for log timestamp
tests/fuzz: fix warning
qga: remove need for QEMU atomic.h
util: replace qemu_get_local_state_pathname()
util: use qemu_create() in qemu_write_pidfile()
util: use qemu_write_full() in qemu_write_pidfile()
util: simplify write in signal handler
qtest: simplify socket_send()
qga: move qga_get_host_name()
Move error_printf_unless_qmp() with monitor unit
tests: run-time skip test-qga if TSAN is enabled
compiler.h: add QEMU_SANITIZE_{ADDRESS,THREAD}
tests: remove block/qdict checks from check-qobject.c
include: move qdict_{crumple,flatten} declarations
include: add qemu/keyval.h
include: move qemu_fdatasync() to osdep
include: move qemu_msync() to osdep
compiler.h: replace QEMU_NORETURN with G_NORETURN
osdep.h: move qemu_build_not_reached()
doc/style: CLang -> Clang
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

compiler.h: replace QEMU_NORETURN with G_NORETURN

G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.

Note that this attribute must be placed before the function dec

compiler.h: replace QEMU_NORETURN with G_NORETURN

G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.

Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>

show more ...

Merge tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu into staging

Fixes and cleanups for 7.0

Hi,

A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.

# gpg

Merge tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu into staging

Fixes and cleanups for 7.0

Hi,

A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.

# gpg: Signature made Tue 22 Mar 2022 12:11:30 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5

* tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu: (21 commits)
qapi: remove needless include
Remove trailing ; after G_DEFINE_AUTO macro
tests: remove needless include
error: use GLib to remember the program name
qga: remove bswap.h include
qapi: remove needless include
meson: fix CONFIG_ATOMIC128 check
meson: move int128 checks from configure
qapi: remove needless include
util: remove the net/net.h dependency
util: remove needless includes
scripts/modinfo-collect: remove unused/dead code
Move HOST_LONG_BITS to compiler.h
Simplify HOST_LONG_BITS
compiler.h: replace QEMU_SENTINEL with G_GNUC_NULL_TERMINATED
compiler.h: replace QEMU_WARN_UNUSED_RESULT with G_GNUC_WARN_UNUSED_RESULT
Replace GCC_FMT_ATTR with G_GNUC_PRINTF
Drop qemu_foo() socket API wrapper
m68k/nios2-semi: fix gettimeofday() result check
vl: typo fix in a comment
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by:

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20220302b' into staging

Migration/HMP/Virtio pull 2022-03-02

A bit of a mix this time:
* Minor fixes from myself, Hanna,

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20220302b' into staging

Migration/HMP/Virtio pull 2022-03-02

A bit of a mix this time:
* Minor fixes from myself, Hanna, and Jack
* VNC password rework by Stefan and Fabian
* Postcopy changes from Peter X that are
the start of a larger series to come
* Removing the prehistoic load_state_old
code from Peter M

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Wed 02 Mar 2022 18:25:12 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert-gitlab/tags/pull-migration-20220302b:
migration: Remove load_state_old and minimum_version_id_old
tests: Pass in MigrateStart** into test_migrate_start()
migration: Add migration_incoming_transport_cleanup()
migration: postcopy_pause_fault_thread() never fails
migration: Enlarge postcopy recovery to capture !-EIO too
migration: Move static var in ram_block_from_stream() into global
migration: Add postcopy_thread_create()
migration: Dump ramblock and offset too when non-same-page detected
migration: Introduce postcopy channels on dest node
migration: Tracepoint change in postcopy-run bottom half
migration: Finer grained tracepoints for POSTCOPY_LISTEN
migration: Dump sub-cmd name in loadvm_process_command tp
migration/rdma: set the REUSEADDR option for destination
qapi/monitor: allow VNC display id in set/expire_password
qapi/monitor: refactor set/expire_password with enums
monitor/hmp: add support for flag argument with value
virtiofsd: Let meson check for statx.stx_mnt_id
clock-vmstate: Add missing END_OF_LIST

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

monitor/hmp: add support for flag argument with value

Adds support for the "-xs" parameter type, where "-x" denotes a flag
name and the "s" suffix indicates that this flag is supposed to take
an arb

monitor/hmp: add support for flag argument with value

Adds support for the "-xs" parameter type, where "-x" denotes a flag
name and the "s" suffix indicates that this flag is supposed to take
an arbitrary string parameter.

These parameters are always optional, the entry in the qdict will be
omitted if the flag is not given.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: fixed typo pointed out by Eric Blake
use s instead of V to indicate string parameter]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220225084949.35746-2-f.ebner@proxmox.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/berrange/tags/hmp-x-qmp-620-pull-request' into staging

Initial conversion of HMP debugging commands to QMP

This introduces a new policy that all HMP commands w

Merge remote-tracking branch 'remotes/berrange/tags/hmp-x-qmp-620-pull-request' into staging

Initial conversion of HMP debugging commands to QMP

This introduces a new policy that all HMP commands will be converted to
have QMP equivalents, marked unstable if no formal QAPI modelling is
intended to be done.

New unstable commands are added as follows:

- HMP "info roms" => QMP "x-query-roms"
- HMP "info profile" => QMP "x-query-profile"
- HMP "info numa" => QMP "x-query-numa"
- HMP "info usb" => QMP "x-query-usb"
- HMP "info rdma" => QMP "x-query-rdma"
- HMP "info ramblock" => QMP "x-query-ramblock"
- HMP "info irq" => QMP "x-query-irq"
- HMP "info jit" => QMP "x-query-jit"
- HMP "info opcount" => QMP "x-query-opcount"

# gpg: Signature made Tue 02 Nov 2021 01:54:28 PM EDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]

* remotes/berrange/tags/hmp-x-qmp-620-pull-request:
qapi: introduce x-query-opcount QMP command
qapi: introduce x-query-jit QMP command
qapi: introduce x-query-irq QMP command
qapi: introduce x-query-ramblock QMP command
qapi: introduce x-query-rdma QMP command
qapi: introduce x-query-usb QMP command
qapi: introduce x-query-numa QMP command
qapi: introduce x-query-profile QMP command
qapi: introduce x-query-roms QMP command
docs/devel: document expectations for HMP commands in the future
docs/devel: add example of command returning unstructured text
docs/devel: document expectations for QAPI data modelling for QMP
monitor: introduce HumanReadableText and HMP support
docs/devel: update error handling guidance for HMP commands
docs/devel: tweak headings in monitor command docs
docs/devel: rename file for writing monitor commands
monitor: make hmp_handle_error return a boolean
monitor: remove 'info ioapic' HMP command

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

monitor: introduce HumanReadableText and HMP support

This provides a foundation on which to convert simple HMP commands to
use QMP. The QMP implementation will generate formatted text targeted
for h

monitor: introduce HumanReadableText and HMP support

This provides a foundation on which to convert simple HMP commands to
use QMP. The QMP implementation will generate formatted text targeted
for human consumption, returning it in the HumanReadableText data type.

The HMP command handler will simply print out the formatted string
within the HumanReadableText data type. Since this will be an entirely
formulaic action in the case of HMP commands taking no arguments, a
custom command handler is provided.

Thus instead of registering a 'cmd' callback for the HMP command, a
'cmd_info_hrt' callback is provided, which will simply be a pointer
to the QMP implementation.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

show more ...