Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bi

Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/riscv: Add fw_dynamic_info32 for booting RV32 OpenSBI

RV32 OpenSBI need a fw_dynamic_info parameter with 32-bit fields instead
of target_ulong.

In RV64 QEMU, target_ulong is 64. So it is not

target/riscv: Add fw_dynamic_info32 for booting RV32 OpenSBI

RV32 OpenSBI need a fw_dynamic_info parameter with 32-bit fields instead
of target_ulong.

In RV64 QEMU, target_ulong is 64. So it is not right for booting RV32 OpenSBI.
We create a fw_dynmaic_info32 struct for this purpose.

Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Conside

Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: Respect firmware ELF entry point

When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware e

hw/riscv: Respect firmware ELF entry point

When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.

Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu into staging

Fourth RISC-V PR for QEMU 8.0, Attempt 2

* A triplet of cleanups to the kernel/initrd loader that avoids
du

Merge tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu into staging

Fourth RISC-V PR for QEMU 8.0, Attempt 2

* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmP5Br8THHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYiT4RD/9hdSlQlR1g/2h4fbCJ3U0GvyNH0T7N
# mt3AX8hFvmfR1O63qqVVebJSHM1dTm6WsA19vKE5tdtbjV5V8UZuBTSqYeRBSrLd
# LK9IHhwv3k9OQ/EG8CgRo7HEMxAurpC26zTf3chnfwa1Wyl5XxCXNx5hPbhu18G9
# oxw0sBi51T0Tb+N6lOVVSfmiEZWLXRq+lDCZdV0j864brsSjo4x8VEGrLaFTOJLf
# X4MW6vBI4Pcb7EGnHjj5WvRKsf8gdahdx8bSTjORIm8oGri9Iyw6Vrg2khuhjnuH
# 99sD1O06cvrylp+sCOVei8H3S6/xCepQXUXnCBCd1/cetgV+olo+ZR78Z8ZjXPED
# jhZ23lsDcge+4W141lsCiwLgzI0YO3Ac+84zQLIvcx16c8zow3G9FO9sTlBSsgnW
# 0XJrsUF7AZB6quUSMytG7WK+OBizzCRwj7ItC+Mty68wLrei5lDVj8b0t8hAQEdr
# dOb7jku+Dz8OspGZx1aDKKifGDO+Ppv4PjAM2G44OmkM824SvvFg8+FEr9NgbKbp
# VgTZDCeVC6IEpzthKsK8WeompLo7Sc33KITqwMbGiyGs+gsnmgKP2bcTLF8YTlFk
# dqFBWjo3tjH5oukgTLCSYY4xPaHR9q418vGAfRox15GtUVliQ9iL5oH47PVXg4U7
# YsNZ74nD1pUueg==
# =Umli
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Feb 2023 18:49:35 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu:
target/riscv: Fix vslide1up.vf and vslide1down.vf
target/riscv: avoid env_archcpu() in cpu_get_tb_cpu_state()
target/riscv: Smepmp: Skip applying default rules when address matches
MAINTAINERS: Add some RISC-V reviewers
target/riscv: Remove privileged spec version restriction for RVV
hw/riscv/boot.c: make riscv_load_initrd() static
hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()
hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv/boot.c: make riscv_load_initrd() static

The only remaining caller is riscv_load_kernel_and_initrd() which
belongs to the same file.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventana

hw/riscv/boot.c: make riscv_load_initrd() static

The only remaining caller is riscv_load_kernel_and_initrd() which
belongs to the same file.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()

The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:

- execute load_ker

hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()

The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:

- execute load_kernel()
- load init_rd()
- write kernel_cmdline

Let's fold everything inside riscv_load_kernel() to avoid code
repetition. To not change the behavior of boards that aren't calling
riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and
allow these boards to opt out from initrd loading.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()

Next patch will move all calls to riscv_load_initrd() to
riscv_load_kernel(). Machines that want to load initrd will be able to
do vi

hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()

Next patch will move all calls to riscv_load_initrd() to
riscv_load_kernel(). Machines that want to load initrd will be able to
do via an extra flag to riscv_load_kernel().

This change will expose a sign-extend behavior that is happening in
load_elf_ram_sym() when running 32 bit guests [1]. This is currently
obscured by the fact that riscv_load_initrd() is using the return of
riscv_load_kernel(), defined as target_ulong, and this return type will
crop the higher 32 bits that would be padded with 1s by the sign
extension when running in 32 bit targets. The changes to be done will
force riscv_load_initrd() to use an uint64_t instead, exposing it to the
padding when dealing with 32 bit CPUs.

There is a discussion about whether load_elf_ram_sym() should or should
not sign extend the value returned by 'lowaddr'. What we can do is to
prevent the behavior change that the next patch will end up doing.
riscv_load_initrd() wasn't dealing with 64 bit kernel entries when
running 32 bit CPUs, and we want to keep it that way.

One way of doing it is to use target_ulong in 'kernel_entry' in
riscv_load_kernel() and rely on the fact that this var will not be sign
extended for 32 bit targets. Another way is to explictly clear the
higher 32 bits when running 32 bit CPUs for all possibilities of
kernel_entry.

We opted for the later. This will allow us to be clear about the design
choices made in the function, while also allowing us to add a small
comment about what load_elf_ram_sym() is doing. With this change, the
consolation patch can do its job without worrying about unintended
behavioral changes.

[1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230207' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for QEMU 8.0

* Update disas for xnor/orn/andn and slli.uw
* Update opentitan IRQs
* Fix r

Merge tag 'pull-riscv-to-apply-20230207' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for QEMU 8.0

* Update disas for xnor/orn/andn and slli.uw
* Update opentitan IRQs
* Fix rom code when Zicsr is disabled
* Update VS timer whenever htimedelta changes
* A collection of fixes for virtulisation
* Set tval for triggered watchpoints
* Cleanups for board and FDT creation
* Add support for the T-Head vendor extensions
* A fix for virtual instr exception
* Fix ctzw behavior
* Fix SBI getchar handler for KVM

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPh+QQACgkQIeENKd+X
# cFSdHwf9HQkO8/zTnWUFCbLVQAV3RB32i6E26uNC4+fQBpcqRWAel2PMYGi6x0H/
# fU43B5YpS7Ddfcc1ql6pJlisqsjkIsQBYjOeUfiMozLIR0dvX14jgUMxc0A8e8sZ
# uv3iRXjkVz/7bEWIdflPcaXgXh74HcQCPgMDsteluZYaz4yRGP6SvI9UJHqe4tjI
# HbiYmP1pcWFGDsAlKx7KbHfH/v9CE03odN3MLzwdsGYekUaFkdLlj7hmyamnqbAh
# OR1y29i2od/8uJMeIu5R8rnGdWoWetCZWP0z2xv3rrZuUzMJ6VXHcdWsY9ycomJs
# rYA0NB/ezmnKX+QAf+8TzW2nybG+5Q==
# =XLpK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Feb 2023 07:08:52 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20230207' of https://github.com/alistair23/qemu: (32 commits)
hw/riscv: virt: Simplify virt_{get,set}_aclint()
target/riscv: fix SBI getchar handler for KVM
target/riscv: fix ctzw behavior
target/riscv: fix for virtual instr exception
target/riscv: add a MAINTAINERS entry for XThead* extension support
RISC-V: Adding XTheadFmv ISA extension
RISC-V: Add initial support for T-Head C906
RISC-V: Set minimum priv version for Zfh to 1.11
RISC-V: Adding T-Head FMemIdx extension
RISC-V: Adding T-Head MemIdx extension
RISC-V: Adding T-Head MemPair extension
RISC-V: Adding T-Head multiply-accumulate instructions
RISC-V: Adding XTheadCondMov ISA extension
RISC-V: Adding XTheadBs ISA extension
RISC-V: Adding XTheadBb ISA extension
RISC-V: Adding XTheadBa ISA extension
RISC-V: Adding XTheadSync ISA extension
RISC-V: Adding XTheadCmo ISA extension
hw/riscv: change riscv_compute_fdt_addr() semantics
hw/riscv: split fdt address calculation from fdt load
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: change riscv_compute_fdt_addr() semantics

As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a
mem_size (which is defaulted to MachineState::ram_size in all boards)
and the F

hw/riscv: change riscv_compute_fdt_addr() semantics

As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a
mem_size (which is defaulted to MachineState::ram_size in all boards)
and the FDT pointer. And it makes a very important assumption: the DRAM
interval dram_base + mem_size is contiguous. This is indeed the case for
most boards that use a FDT.

The Icicle Kit board works with 2 distinct RAM banks that are separated
by a gap. We have a lower bank with 1GiB size, a gap follows, then at
64GiB the high memory starts. MachineClass::default_ram_size for this
board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM
size, meaning that there we'll always have at least 512 MiB in the Hi
RAM area.

Using riscv_compute_fdt_addr() in this board is weird because not only
the board has sparse RAM, and it's calling it using the base address of
the Lo RAM area, but it's also using a mem_size that we have guarantees
that it will go up to the Hi RAM. All the function assumptions doesn't
work for this board.

In fact, what makes the function works at all in this case is a
coincidence. Commit 1a475d39ef54 introduced a 3GB boundary for the FDT,
down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For
the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000
(2 Gb) and it has a 1Gb size, so it will fall in the conditions to put
the FDT under a 3Gb address, which happens to be exactly at the end of
DRAM_LO. If the base address of the Lo area started later than 3Gb this
function would be unusable by the board. Changing any assumptions inside
riscv_compute_fdt_addr() can also break it by accident as well.

Let's change riscv_compute_fdt_addr() semantics to be appropriate to the
Icicle Kit board and for future boards that might have sparse RAM
topologies to worry about:

- relieve the condition that the dram_base + mem_size area is contiguous,
since this is already not the case today;

- receive an extra 'dram_size' size attribute that refers to a contiguous
RAM block that the board wants the FDT to reside on.

Together with 'mem_size' and 'fdt', which are now now being consumed by a
MachineState pointer, we're able to make clear assumptions based on the
DRAM block and total mem_size available to ensure that the FDT will be put
in a valid RAM address.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: split fdt address calculation from fdt load

A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/

hw/riscv: split fdt address calculation from fdt load

A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/dtb by using that address.

riscv_load_fdt() is doing a bit too much in comparison. It's calculating
the fdt address via an elaborated heuristic to put the FDT at the bottom
of DRAM, and "bottom of DRAM" will vary across boards and
configurations, then it's actually loading the fdt, and finally it's
returning the fdt address used to the caller.

Reduce the existing complexity of riscv_load_fdt() by splitting its code
into a new function, riscv_compute_fdt_addr(), that will take care of
all fdt address logic. riscv_load_fdt() can then be a simple function
that just loads a fdt at the given fdt address.

We're also taken the opportunity to clarify the intentions and
assumptions made by these functions. riscv_load_fdt() is now receiving a
hwaddr as fdt_addr because there is no restriction of having to load the
fdt in higher addresses that doesn't fit in an uint32_t.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for QEMU 8.0

* riscv_htif: Support console output via proxy syscall
* Cleanup firmware a

Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for QEMU 8.0

* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
# cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
# H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
# rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
# slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
# k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
# BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
# =ifFF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 07:38:37 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu: (37 commits)
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
target/riscv: Remove helper_set_rod_rounding_mode
target/riscv: Introduce helper_set_rounding_mode_chkfrm
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
target/riscv: Fix up masking of vsip/vsie accesses
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
hw/riscv/sifive_u.c: simplify create_fdt()
hw/riscv/virt.c: simplify create_fdt()
hw/riscv/spike.c: simplify create_fdt()
target/riscv: Use TARGET_FMT_lx for env->mhartid
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
target/riscv/cpu: set cpu->cfg in register_cpu_props()
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv/boot.c: use MachineState in riscv_load_kernel()

All callers are using kernel_filename as machine->kernel_filename.

This will also simplify the changes in riscv_load_kernel() that we're
goi

hw/riscv/boot.c: use MachineState in riscv_load_kernel()

All callers are using kernel_filename as machine->kernel_filename.

This will also simplify the changes in riscv_load_kernel() that we're
going to do next.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/boot.c: use MachineState in riscv_load_initrd()

'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.

Cc: Palmer Dabbel

hw/riscv/boot.c: use MachineState in riscv_load_initrd()

'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()

riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being u

hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()

riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being used
just to write the initrd FDT node. Every existing caller of
riscv_load_initrd() is writing the FDT in the same manner.

We can simplify things by writing the FDT inside riscv_load_initrd(),
sparing callers from having to manage start/end addrs to write the FDT
themselves.

An 'if (fdt)' check is already inserted at the end of the function
because we'll end up using it later on with other boards that doesn´t
have a FDT.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/boot.c: Introduce riscv_find_firmware()

Rename previous riscv_find_firmware() to riscv_find_bios(), and
introduce a new riscv_find_firmware() to implement the first half
part of the work do

hw/riscv/boot.c: Introduce riscv_find_firmware()

Rename previous riscv_find_firmware() to riscv_find_bios(), and
introduce a new riscv_find_firmware() to implement the first half
part of the work done in riscv_find_and_load_firmware().

This new API is helpful for machine that wants to know the final
chosen firmware file name but does not want to load it.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/boot.c: introduce riscv_default_firmware_name()

Some boards are duplicating the 'riscv_find_and_load_firmware' call
because the 32 and 64 bits images have different names. Create
a function

hw/riscv/boot.c: introduce riscv_default_firmware_name()

Some boards are duplicating the 'riscv_find_and_load_firmware' call
because the 32 and 64 bits images have different names. Create
a function to handle this detail instead of hardcoding it in the boards.

Ideally we would bake this logic inside riscv_find_and_load_firmware(),
or even create a riscv_load_default_firmware(), but at this moment we
cannot infer whether the machine is running 32 or 64 bits without
accessing RISCVHartArrayState, which in turn can't be accessed via the
common code from boot.c. In the end we would exchange 'firmware_name'
for a flag with riscv_is_32bit(), which isn't much better than what we
already have today.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-6-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-11-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/boot.c: make riscv_find_firmware() static

The only caller is riscv_find_and_load_firmware(), which is in the same
file.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
R

hw/riscv/boot.c: make riscv_find_firmware() static

The only caller is riscv_find_and_load_firmware(), which is in the same
file.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-5-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-10-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20221014' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for QEMU 7.2

* Update qtest comment
* Fix coverity issue with Ibex SPI
* Move load_image_

Merge tag 'pull-riscv-to-apply-20221014' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for QEMU 7.2

* Update qtest comment
* Fix coverity issue with Ibex SPI
* Move load_image_to_fw_cfg() to common location
* Enable booting S-mode firmware from pflash on virt machine
* Add disas support for vector instructions
* Priority level fixes for PLIC
* Fixup TLB size calculation when using PMP

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmNJFR8ACgkQIeENKd+X
# cFTOzgf+Mg4vy3PpY/hDuYJwZyYrgcY9M/VwUFONUD5TL1ehweuEeu5NF/iJpzfP
# ywjvESxhFpGQ97zSH10IbTxQwP5fifE7JMlC4ncYTTLQYk43kiYmSM5MAbxgEC44
# PgF5/WVUWI8tDJhzfAEII17AohtTc9rzWcoXh+oLX53IB0V7qh4Eq0+Rm/i/yO5I
# oD70deU+DegHb4ka6w6k2nHEhi9IoNA0uslQrQzKVr/WQPE/1TVkmvy0u3tiFSoI
# 0MFXQjCirzdJoNU+5Wq3F0ygPMupMopOnidaMR8wH9fk3pb7hzzOve5wQRM+EtIv
# W2QGnWNaiR7n3UeGWYnh7aidcJ7Dfw==
# =O3mB
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 14 Oct 2022 03:51:59 EDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20221014' of https://github.com/alistair23/qemu:
target/riscv: pmp: Fixup TLB size calculation
hw/intc: sifive_plic: change interrupt priority register to WARL field
hw/intc: sifive_plic: fix hard-coded max priority level
disas/riscv.c: rvv: Add disas support for vector instructions
hw/riscv: virt: Enable booting S-mode firmware from pflash
hw/riscv: virt: Move create_fw_cfg() prior to loading kernel
hw/arm, loongarch: Move load_image_to_fw_cfg() to common location
hw/ssi: ibex_spi: fixup/add rw1c functionality
hw/ssi: ibex_spi: fixup coverity issue
hw/riscv: Update comment for qtest check in riscv_find_firmware()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/riscv: virt: Enable booting S-mode firmware from pflash

To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynami

hw/riscv: virt: Enable booting S-mode firmware from pflash

To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.

When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.

If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.

In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu into staging

First RISC-V PR for QEMU 7.2

* Update [m|h]tinst CSR in interrupt handling
* Force disable extensions if

Merge tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu into staging

First RISC-V PR for QEMU 7.2

* Update [m|h]tinst CSR in interrupt handling
* Force disable extensions if priv spec version does not match
* fix shifts shamt value for rv128c
* move zmmul out of the experimental
* virt: pass random seed to fdt
* Add checks for supported extension combinations
* Upgrade OpenSBI to v1.1
* Fix typo and restore Pointer Masking functionality for RISC-V
* Add mask agnostic behaviour (rvv_ma_all_1s) for vector extension
* Add Zihintpause support
* opentitan: bump opentitan version
* microchip_pfsoc: fix kernel panics due to missing peripherals
* Remove additional priv version check for mcountinhibit
* virt machine device tree improvements
* Add xicondops in ISA entry
* Use official extension names for AIA CSRs

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmMYUCUACgkQIeENKd+X
# cFRpEQf/T1FFcGq3TZrEPmqMdFPUSb+SEJNgwYFfloqkNjB2HIFbd2tKWAE1Tgjr
# esV00p7YPyox1Ct+fKdwSxDxRSN9OI56v+nI8ZFwluVu7vpChuTFmOHur8rNxl1T
# 8MZgP2kMxMOJSnyHCS2iV9AUFdTExS65DbmlAKzi5fpBtt9jYTPSXsI49MP8+Ku/
# 1gdv5ZF5BXDJsGs7xHvE92dRzQEVN+As64IjlknFHHpmCM1b+Ah3GekXUbKmBuDG
# /NaZyZNPCYxdRmPm/D7k0SOMZSJ9sLyhXTetZ0ZpBxG1ioClX37yS5wn4NLsCz/2
# fXrnML+MQFUKZ03AZ9lWvxcu7kXfWA==
# =7mGD
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 07 Sep 2022 04:02:45 EDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu: (44 commits)
target/riscv: Update the privilege field for sscofpmf CSRs
hw/riscv: virt: Add PMU DT node to the device tree
target/riscv: Add few cache related PMU events
target/riscv: Simplify counter predicate function
target/riscv: Add sscofpmf extension support
target/riscv: Add vstimecmp support
target/riscv: Add stimecmp support
hw/intc: Move mtimer/mtimecmp to aclint
target/riscv: Use official extension names for AIA CSRs
target/riscv: Add xicondops in ISA entry
hw/core: fix platform bus node name
hw/riscv: virt: fix syscon subnode paths
hw/riscv: virt: fix the plic's address cells
hw/riscv: virt: fix uart node name
target/riscv: Remove additional priv version check for mcountinhibit
hw/riscv: microchip_pfsoc: fix kernel panics due to missing peripherals
hw/riscv: opentitan: bump opentitan version
target/riscv: Fix priority of csr related check in riscv_csrrw_check
hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()
target/riscv: Add Zihintpause support
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()

The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redunda

hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()

The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20220422-1' of github.com:alistair23/qemu into staging

First RISC-V PR for QEMU 7.1

* Add support for Ibex SPI to OpenTitan
* Add support for privileged spec versio

Merge tag 'pull-riscv-to-apply-20220422-1' of github.com:alistair23/qemu into staging

First RISC-V PR for QEMU 7.1

* Add support for Ibex SPI to OpenTitan
* Add support for privileged spec version 1.12.0
* Use privileged spec version 1.12.0 for virt machine by default
* Allow software access to MIP SEIP
* Add initial support for the Sdtrig extension
* Optimisations for vector extensions
* Improvements to the misa ISA string
* Add isa extenstion strings to the device tree
* Don't allow `-bios` options with KVM machines
* Fix NAPOT range computation overflow
* Fix DT property mmu-type when CPU mmu option is disabled
* Make RISC-V ACLINT mtime MMIO register writable
* Add and enable native debug feature
* Support 64bit fdt address.

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmJh+GQACgkQIeENKd+X
# cFTKZQf/UQ8yb5DozdeNbm2pmfjJnEEsnXB6k95wIX9pjrJ3HkypHzoRpLbIDzET
# KsPjRW6N5SLPINrYfgBuxUv0A/6jOG7cTC/Bimu16wPyS2zQopiTTgiJv6qLkO5G
# QUBWz/6kaXNT+fQiTnXXqjViADO49FigYRWUmRfNabeUwb6YoQwoBY6B5jpwZlbI
# B9qDdcKnYet5zwi1rGFedRC1XtP7ZDF1lylqNS2nnfr1ZvOWYkAJb5TJDi/4qUpz
# i/wGRx/8KaYD5ehGe7Xd50sMM9lLlzNgOnZL0F5cRnA8e/3nRFjTeQ7RoSKGBdaS
# 7J4RqA9YMhuPL2tTq95wof6EpVsSNw==
# =yLIg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 05:35:48 PM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220422-1' of github.com:alistair23/qemu: (31 commits)
hw/riscv: boot: Support 64bit fdt address.
hw/core: tcg-cpu-ops.h: Update comments of debug_check_watchpoint()
target/riscv: cpu: Enable native debug feature
target/riscv: machine: Add debug state description
target/riscv: csr: Hook debug CSR read/write
target/riscv: cpu: Add a config option for native debug
target/riscv: debug: Implement debug related TCGCPUOps
hw/intc: riscv_aclint: Add reset function of ACLINT devices
hw/intc: Make RISC-V ACLINT mtime MMIO register writable
hw/intc: Support 32/64-bit mtimecmp and mtime accesses in RISC-V ACLINT
hw/intc: Add .impl.[min|max]_access_size declaration in RISC-V ACLINT
hw/riscv: virt: fix DT property mmu-type when CPU mmu option is disabled
target/riscv/pmp: fix NAPOT range computation overflow
hw/riscv: virt: Exit if the user provided -bios in combination with KVM
target/riscv: Use cpu_loop_exit_restore directly from mmu faults
target/riscv: fix start byte for vmv<nf>r.v when vstart != 0
target/riscv: Add isa extenstion strings to the device tree
target/riscv: misa to ISA string conversion fix
target/riscv: optimize helper for vmv<nr>r.v
target/riscv: optimize condition assign for scale < 0
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/riscv: boot: Support 64bit fdt address.

The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB,
but not all platforms have dram_base within 3GB.

This patch a

hw/riscv: boot: Support 64bit fdt address.

The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB,
but not all platforms have dram_base within 3GB.

This patch adds an exception for dram base not within 3GB,
which will place fdt at dram_end align 16MB.

riscv_setup_rom_reset_vec() also needs to be modified

Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220419115945.37945-1-dylan@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220121-1' into staging

Third RISC-V PR for QEMU 7.0

* Fixes for OpenTitan timer
* Correction of OpenTitan PLIC stride len

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220121-1' into staging

Third RISC-V PR for QEMU 7.0

* Fixes for OpenTitan timer
* Correction of OpenTitan PLIC stride length
* RISC-V KVM support
* Device tree code cleanup
* Support for the Zve64f and Zve32f extensions
* OpenSBI binary loading support for the Spike machine
* Removal of OpenSBI ELFs
* Support for the UXL field in xstatus

# gpg: Signature made Fri 21 Jan 2022 05:57:09 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20220121-1: (61 commits)
target/riscv: Relax UXL field for debugging
target/riscv: Enable uxl field write
target/riscv: Set default XLEN for hypervisor
target/riscv: Adjust scalar reg in vector with XLEN
target/riscv: Adjust vector address with mask
target/riscv: Fix check range for first fault only
target/riscv: Remove VILL field in VTYPE
target/riscv: Adjust vsetvl according to XLEN
target/riscv: Split out the vill from vtype
target/riscv: Split pm_enabled into mask and base
target/riscv: Calculate address according to XLEN
target/riscv: Alloc tcg global for cur_pm[mask|base]
target/riscv: Create current pm fields in env
target/riscv: Adjust csr write mask with XLEN
target/riscv: Relax debug check for pm write
target/riscv: Use gdb xml according to max mxlen
target/riscv: Extend pc for runtime pc write
target/riscv: Ignore the pc bits above XLEN
target/riscv: Create xl field in env
target/riscv: Sign extend pc for different XLEN
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...