Merge tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa into staging

target/hppa: Add emulation of a C3700 HP-PARISC workstation

This series adds a new PA-RISC machine emulation for

Merge tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa into staging

target/hppa: Add emulation of a C3700 HP-PARISC workstation

This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.

The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.

With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.

Helge

v4 changes:
- Fix testsuite error in astro by adding a realize() implementation

v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch

v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
# X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
# jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
# =Esj+
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 15:51:57 PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Add new HP C3700 machine
hw/hppa: Split out machine creation
hw/hppa: Provide RTC and DebugOutputPort on CPU #0
hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
MAINTAINERS: Update HP-PARISC entries
pci-host: Wire up new Astro/Elroy PCI bridge
hw/pci-host: Add Astro system bus adapter found on PA-RISC machines
lasips2: LASI PS/2 devices are not user-createable
pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip
hw/hppa: Require at least SeaBIOS-hppa version 10
target/hppa: Update to SeaBIOS-hppa version 10

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip

Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

- Jeuk Kim's emulated UFS device
- Fabiano Rosas' IOThread GSource "name" debugging aid

# -----BEGIN PG

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

- Jeuk Kim's emulated UFS device
- Fabiano Rosas' IOThread GSource "name" debugging aid

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmT6E3YACgkQnKSrs4Gr
# c8g3NwgAxVSzxS6hGCs6hKjRJ6f8HIlBWWbeO273XWbuAsMUbbYYAw7Gx6bzrbnb
# NFdFZ4F3M0lOfIaGFONasA4Wo2rIuiWVfj6Es4pcYjnexF0OmhAib2RLLEtuDlyc
# EJB/s4Mo2Xk+aw8LzQoYJVvDYi+hTZMmaHaQmNAsYLyQmsN/zg5iEE/vMDqVCNOs
# trv9rMGOJBblzJ4bqgItJ80nSVaEbwErpiU1+NTY77dpTeIt/3nq7yGAo+h4rVpc
# Tv4IuH8y6Rb9xjlwSANL2YKS2VOuJc5J/G5vpM63T4O2yzYSosTsU+ET/ZqB2U1H
# v0uT9K2akfsTOFR8rUaroFsXha8IMQ==
# =6SqP
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 14:16:22 EDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [ultimate]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [ultimate]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
tests/qtest: Introduce tests for UFS
hw/ufs: Support for UFS logical unit
hw/ufs: Support for Query Transfer Requests
hw/ufs: Initial commit for emulated Universal-Flash-Storage
iothread: Set the GSource "name" field

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/ufs: Initial commit for emulated Universal-Flash-Storage

Universal Flash Storage (UFS) is a high-performance mass storage device
with a serial interface. It is primarily used as a high-performanc

hw/ufs: Initial commit for emulated Universal-Flash-Storage

Universal Flash Storage (UFS) is a high-performance mass storage device
with a serial interface. It is primarily used as a high-performance
data storage device for embedded applications.

This commit contains code for UFS device to be recognized
as a UFS PCI device.
Patches to handle UFS logical unit and Transfer Request will follow.

Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 10232660d462ee5cd10cf673f1a9a1205fc8276c.1693980783.git.jeuk20.kim@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

make TCO watchdog work by default
part of generic vdpa support
asi

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

make TCO watchdog work by default
part of generic vdpa support
asid interrupt for vhost-vdpa
added flex bus port DVSEC for cxl

misc fixes, cleanups, documentation

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 21 Dec 2022 12:32:36 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
contrib/vhost-user-blk: Replace lseek64 with lseek
libvhost-user: Switch to unsigned int for inuse field in struct VuVirtq
hw/virtio: Extract QMP related code virtio-qmp.c
hw/virtio: Extract config read/write accessors to virtio-config-io.c
hw/virtio: Constify qmp_virtio_feature_map_t[]
hw/virtio: Guard and restrict scope of qmp_virtio_feature_map_t[]
hw/virtio: Rename virtio_ss[] -> specific_virtio_ss[]
hw/virtio: Add missing "hw/core/cpu.h" include
hw/cxl/device: Add Flex Bus Port DVSEC
hw/acpi: Rename tco.c -> ich9_tco.c
acpi/tests/avocado/bits: add mformat as one of the dependencies
docs/acpi/bits: document BITS_DEBUG environment variable
pci: drop redundant PCIDeviceClass::is_bridge field
remove DEC 21154 PCI bridge
vhost: fix vq dirty bitmap syncing when vIOMMU is enabled
acpi/tests/avocado/bits: add SPDX license identifiers for bios bits tests
include/hw: attempt to document VirtIO feature variables
vhost-user: send set log base message only once
vdpa: always start CVQ in SVQ mode if possible
vdpa: add shadow_data to vhost_vdpa
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

remove DEC 21154 PCI bridge

Code has not been used practically since its inception (2004)
f2aa58c6f4a20 UniNorth PCI bridge support
or maybe even earlier, but it was consuming contributors time
as

remove DEC 21154 PCI bridge

Code has not been used practically since its inception (2004)
f2aa58c6f4a20 UniNorth PCI bridge support
or maybe even earlier, but it was consuming contributors time
as QEMU was being rewritten.
Drop it for now. Whomever would like to actually
use the thing, can make sure it actually works/reintroduce
it back when there is a user.

PS:
I've stumbled upon this when replacing PCIDeviceClass::is_bridge
field with QOM cast to PCI_BRIDGE type. Unused DEC 21154
was the only one trying to use the field with plain PCIDevice.
It's not worth keeping the field around for the sake of the code
that was commented out 'forever'.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221129101341.185621-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pci,pc,virtio: features, tests, fixes, cleanups

lots of acpi rework
first version of biosbits infrastructur

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pci,pc,virtio: features, tests, fixes, cleanups

lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/pci: PCIe Data Object Exchange emulation

Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange

Supports multiple DOE PCIe Extended Capabilities for a

hw/pci: PCIe Data Object Exchange emulation

Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange

Supports multiple DOE PCIe Extended Capabilities for a single PCIe
device. For each capability, a static array of DOEProtocol should be passed
to pcie_doe_init(). The protocols in that array will be registered under
the DOE capability structure. For each protocol, vendor ID, type, and
corresponding callback function (handle_request()) should be implemented.
This callback function represents how the DOE request for corresponding
protocol will be handled.

pcie_doe_{read/write}_config() must be appended to corresponding PCI
device's config_read/write() handler to enable DOE access. In
pcie_doe_read_config(), false will be returned if pci_config_read()
offset is not within DOE capability range. In pcie_doe_write_config(),
the function will have no affect if the address is not within the related
DOE PCIE extended capability.

Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme into staging

hw/nvme updates

- sriov functionality
- odd fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEUigzqnXi3

Merge tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme into staging

hw/nvme updates

- sriov functionality
- odd fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmK02wUACgkQTeGvMW1P
# DenNPwgAwhQCXXacTb+6vEdxN30QoWygzQj5BLm//SiXlj7hBX7P/JqCxYF5vUDU
# EaZkl4n3ry5T1xqlUWIBFdIAmKyrsWz2eKTrX41g64i/L+/nfJXZ+IgQc3WkM/FK
# 5NwwAE8q/JGiRczLesF/9QvQq/90L6QtyC48bsS8AIcl5IcqHCKGwEJS7LErltex
# YZDJyTNU4wB2XFophylJUL43GrHa/kUFA2ZHgs9iuH0p5LGG6UM3KoinBKcbwn47
# iEWKccvsHSyfE8VpJJS5STMEeGGaBPziZ654ElLmzVq6EXDKMCoX03naQ9Q8oSpl
# FiktbxllCYdmECb44PNBEd/nLdpCdQ==
# =o54a
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Jun 2022 02:28:37 PM PDT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9

* tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme:
hw/nvme: clear aen mask on reset
Revert "hw/block/nvme: add support for sgl bit bucket descriptor"
hw/nvme: clean up CC register write logic
hw/acpi: Make the PCI hot-plug aware of SR-IOV
hw/nvme: Update the initalization place for the AER queue
docs: Add documentation for SR-IOV and Virtualization Enhancements
hw/nvme: Add support for the Virtualization Management command
hw/nvme: Initialize capability structures for primary/secondary controllers
hw/nvme: Calculate BAR attributes in a function
hw/nvme: Remove reg_size variable and update BAR0 size calculation
hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
hw/nvme: Implement the Function Level Reset
hw/nvme: Add support for Secondary Controller List
hw/nvme: Add support for Primary Controller Capabilities
hw/nvme: Add support for SR-IOV

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/nvme: Add support for SR-IOV

This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.

Essentially, it allows to define the maximum number of virtual functions

hw/nvme: Add support for SR-IOV

This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.

Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.

Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.

NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.

NVMe subsystem is required for the use of SR-IOV.

Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

show more ...

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

most of CXL support
fixes, cleanups all over the place

Signed-off-by:

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

most of CXL support
fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
vhost-user-scsi: avoid unlink(NULL) with fd passing
virtio-net: don't handle mq request in userspace handler for vhost-vdpa
vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
vhost-vdpa: backend feature should set only once
vhost-net: fix improper cleanup in vhost_net_start
vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
hw/i386/amd_iommu: Fix IOMMU event log encoding errors
hw/i386: Make pic a property of common x86 base machine type
hw/i386: Make pit a property of common x86 base machine type
include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
vhost-user: more master/slave things
virtio: add vhost support for virtio devices
virtio: drop name parameter for virtio_init()
virtio/vhost-user: dynamically assign VhostUserHostNotifiers
hw/virtio/vhost-user: don't suppress F_CONFIG when supported
include/hw: start documenting the vhost API
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/cxl/device: Add a memory device (8.2.8.5)

A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously d

hw/cxl/device: Add a memory device (8.2.8.5)

A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.

Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).

Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform. The creation of these windows
is later in this series.

The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"

Note: Dropped PCDIMM info interfaces for now. They can be added if
appropriate at a later date.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20210714.0' into staging

VFIO update 2021-07-14

* Coverity fix to discard listener (David Hildenbrand)

* MSI-X PBA quirk for BAIDU

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20210714.0' into staging

VFIO update 2021-07-14

* Coverity fix to discard listener (David Hildenbrand)

* MSI-X PBA quirk for BAIDU VFs, additional helper use cases (Cai Huoqing)

# gpg: Signature made Wed 14 Jul 2021 22:31:35 BST
# gpg: using RSA key 42F6C04E540BD1A99E7B8A90239B9B6E3BB08B22
# gpg: issuer "alex.williamson@redhat.com"
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg: aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg: aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-update-20210714.0:
vfio/pci: Add pba_offset PCI quirk for BAIDU KUNLUN AI processor
vfio/pci: Change to use vfio_pci_is()
vfio: Fix CID 1458134 in vfio_register_ram_discard_listener()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

vfio/pci: Add pba_offset PCI quirk for BAIDU KUNLUN AI processor

Fix pba_offset initialization value for BAIDU KUNLUN Virtual
Function device. The KUNLUN hardware returns an incorrect
value for the

vfio/pci: Add pba_offset PCI quirk for BAIDU KUNLUN AI processor

Fix pba_offset initialization value for BAIDU KUNLUN Virtual
Function device. The KUNLUN hardware returns an incorrect
value for the VF PBA offset, and add a quirk to instead
return a hardcoded value of 0xb400.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210713093743.942-1-caihuoqing@baidu.com
[aw: comment & whitespace tuning]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging

ppc patch queue 2021-05-04

Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff ac

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging

ppc patch queue 2021-05-04

Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:

* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups

# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
target/ppc: removed VSCR from SPR registration
target/ppc: Reduce the size of ppc_spr_t
target/ppc: Clean up _spr_register et al
target/ppc: Add POWER10 exception model
target/ppc: rework AIL logic in interrupt delivery
target/ppc: move opcode table logic to translate.c
target/ppc: code motion from translate_init.c.inc to gdbstub.c
spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
spapr.h: increase FDT_MAX_SIZE
spapr.c: do not use MachineClass::max_cpus to limit CPUs
ppc: Rename current DAWR macros and variables
target/ppc: POWER10 supports scv
target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
docs/system: ppc: Add documentation for ppce500 machine
roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
roms/Makefile: Update ppce500 u-boot build directory name
ppc/spapr: Add support for implement support for H_SCM_HEALTH
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/pci-host: Add emulation of Marvell MV64361 PPC system controller

The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulat

hw/pci-host: Add emulation of Marvell MV64361 PPC system controller

The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulation of it
that models the device enough to boot guests on this board. The
mv643xx.h header with register definitions is taken from Linux 4.15.10
only fixing white space errors, removing not needed parts and changing
formatting for QEMU coding style.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <79545ebd03bfe0665b73d2d7cbc74fdf3d62629e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

vt82c686: Add emulation of VT8231 south bridge

Add emulation of VT8231 south bridge ISA part based on the similar
VT82C686B but implemented in a separate subclass that holds the
differences while re

vt82c686: Add emulation of VT8231 south bridge

Add emulation of VT8231 south bridge ISA part based on the similar
VT82C686B but implemented in a separate subclass that holds the
differences while reusing parts that can be shared.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <10abc9f89854e7c980b9731c33d25a2e307e9c4f.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it

To allow reusing ISA bridge emulation for vt8231_isa move the device
state of vt82c686b_isa emulation in an abstract via_isa cl

vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it

To allow reusing ISA bridge emulation for vt8231_isa move the device
state of vt82c686b_isa emulation in an abstract via_isa class. This
change breaks migration back compatibility but this is not an issue
for Fuloong2E machine which is not versioned or migration supported.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <0cb8fc69c7aaa555589181931b881335fecd2ef3.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210221' into staging

MIPS patches queue

- Drop redundant struct MemmapEntry (Bin)
- Fix for Coverity CID 1438965 and 1438967 (Jiaxun)

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210221' into staging

MIPS patches queue

- Drop redundant struct MemmapEntry (Bin)
- Fix for Coverity CID 1438965 and 1438967 (Jiaxun)
- Add MIPS bootloader API (Jiaxun)
- Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun)
- Add PMON test for Loongson-3A1000 CPU (Jiaxun)
- Convert to translator API (Philippe)
- MMU cleanups (Philippe)
- Promote 128-bit multimedia registers as global ones (Philippe)
- Various cleanups/fixes on the VT82C686B southbridge (Zoltan)

# gpg: Signature made Sun 21 Feb 2021 18:43:57 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/mips-20210221: (43 commits)
vt82c686: Fix superio_cfg_{read,write}() functions
vt82c686: Log superio_cfg unimplemented accesses
vt82c686: Simplify by returning earlier
vt82c686: Reduce indentation by returning early
vt82c686: Remove index field of SuperIOConfig
vt82c686: Move creation of ISA devices to the ISA bridge
vt82c686: Simplify vt82c686b_realize()
vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it
vt82c686: Set user_creatable=false for VT82C686B_PM
vt82c686: Fix up power management io base and config
vt82c686: Correctly reset all registers to default values on reset
vt82c686: Correct vt82c686-pm I/O size
vt82c686: Make vt82c686-pm an I/O tracing region
vt82c686: Fix SMBus IO base and configuration registers
vt82c686: Reorganise code
vt82c686: Move superio memory region to SuperIOConfig struct
target/mips: Use GPR move functions in gen_HILO1_tx79()
target/mips: Introduce gen_load_gpr_hi() / gen_store_gpr_hi() helpers
target/mips: Rename 128-bit upper halve GPR registers
target/mips: Promote 128-bit multimedia registers as global ones
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it

The vt82c686b-pm model can be shared between VT82C686B and VT8231. The
only difference between the two is the device

vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it

The vt82c686b-pm model can be shared between VT82C686B and VT8231. The
only difference between the two is the device id in what we emulate so
make an abstract via-pm model by renaming appropriately and add types
for vt82c686b-pm and vt8231-pm based on it.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <34969fc7be984fa070479bfb9f748993a0aef31b.1610223397.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

v4:
* Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI
host

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

v4:
* Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI
host bridge for remote device" [Philippe and Thomas]

# gpg: Signature made Wed 10 Feb 2021 09:26:14 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request: (27 commits)
docs: fix Parallels Image "dirty bitmap" section
multi-process: perform device reset in the remote process
multi-process: Retrieve PCI info from remote process
multi-process: create IOHUB object to handle irq
multi-process: Synchronize remote memory
multi-process: PCI BAR read/write handling for proxy & remote endpoints
multi-process: Forward PCI config space acceses to the remote process
multi-process: add proxy communication functions
multi-process: introduce proxy object
multi-process: setup memory manager for remote device
multi-process: Associate fd of a PCIDevice with its object
multi-process: Initialize message handler in remote device
multi-process: define MPQemuMsg format and transmission functions
io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers
io: add qio_channel_writev_full_all helper
multi-process: setup a machine object for remote device process
multi-process: setup PCI host bridge for remote device
multi-process: Add config option for multi-process QEMU
memory: alloc RAM from file at offset
multi-process: add configure and usage information
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

multi-process: create IOHUB object to handle irq

IOHUB object is added to manage PCI IRQs. It uses KVM_IRQFD
ioctl to create irqfd to injecting PCI interrupts to the guest.
IOHUB object forwards the

multi-process: create IOHUB object to handle irq

IOHUB object is added to manage PCI IRQs. It uses KVM_IRQFD
ioctl to create irqfd to injecting PCI interrupts to the guest.
IOHUB object forwards the irqfd to the remote process. Remote process
uses this fd to directly send interrupts to the guest, bypassing QEMU.

Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 51d5c3d54e28a68b002e3875c59599c9f5a424a1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
COLO-compare: Fix incorrect `if` logic
virtio-net: prevent offloads reset on migration
virtio: new post_load hook
net: add tulip (dec21143) driver

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

net: add tulip (dec21143) driver

This adds the basic functionality to emulate a Tulip NIC.

Implemented are:

- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor suppo

net: add tulip (dec21143) driver

This adds the basic functionality to emulate a Tulip NIC.

Implemented are:

- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY

Not implemented, mostly because i had no OS using these functions:

- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion

Successfully tested with the following Operating Systems:

- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191022155413.4619-1-svens@stackframe.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux ho

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...