Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, fixes

Several features that landed at the last possible moment:

Passthrough HDM d

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, fixes

Several features that landed at the last possible moment:

Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration

Plus a couple of bugfixes that look important to have in the release.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
# j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
# oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
# tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
# gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
# wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
# =e1yv
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits)
virtio: fix reachable assertion due to stale value of cached region size
hw/virtio/vhost-user: avoid using unitialized errp
hw/pxb-cxl: Support passthrough HDM Decoders unless overridden
hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers
hw/mem/cxl_type3: Add CXL RAS Error Injection Support.
hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use.
hw/cxl: Fix endian issues in CXL RAS capability defaults / masks
hw/mem/cxl-type3: Add AER extended capability
hw/pci-bridge/cxl_root_port: Wire up MSI
hw/pci-bridge/cxl_root_port: Wire up AER
hw/pci/aer: Add missing routing for AER errors
hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register
pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback
pcihp: move fields enabling hotplug into AcpiPciHpState
acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices()
acpi: pci: move BSEL into build_append_pcihp_slots()
acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable
pci: move acpi-index uniqueness check to generic PCI device code
tests: acpi: update expected blobs
tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pci: fix 'hotplugglable' property behavior

Currently the property may flip its state
during VM bring up or just doesn't work as
the name implies.

In particular with PCIE root port that has
'hotplug

pci: fix 'hotplugglable' property behavior

Currently the property may flip its state
during VM bring up or just doesn't work as
the name implies.

In particular with PCIE root port that has
'hotplug={on|off}' property, and when it's
turned off, one would expect
'hotpluggable' == false
for any devices attached to it.
Which is not the case since qbus_is_hotpluggable()
used by the property just checks for presence
of any hotplug_handler set on bus.

The problem is that name BusState::hotplug_handler
from its inception is misnomer, as it handles
not only hotplug but also in many cases coldplug
as well (i.e. generic wiring interface), and
it's fine to have hotplug_handler set on bus
while it doesn't support hotplug (ex. pcie-slot
with hotplug=off).

Another case of root port flipping 'hotpluggable'
state when ACPI PCI hotplug is enabled in this
case root port with 'hotplug=off' starts as
hotpluggable and then later on, pcihp
hotplug_handler clears hotplug_handler
explicitly after checking root port's 'hotplug'
property.

So root-port hotpluggablity check sort of works
if pcihp is enabled but is broken if pcihp is
disabled.

One way to deal with the issue is to ask
hotplug_handler if bus it controls is hotpluggable
or not. To do that add is_hotpluggable_bus()
hook to HotplugHandler interface and use it in
'hotpluggable' property + teach pcie-slot to
actually look into 'hotplug' property state
before deciding if bus is hotpluggable.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habk

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redha

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue post-3.1.0 (including 4.0 machine-types)

Features:
* Add 4.0 machine-types to q35/440fx/arm

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue post-3.1.0 (including 4.0 machine-types)

Features:
* Add 4.0 machine-types to q35/440fx/arm/spapr (Alex Williamson)

Documentation:
* Document vCPU hotplug procedure (Kashyap Chamarthy)
* Deprecate `cpu-add` monitor commands (Kashyap Chamarthy)

Bug fixes:
* A small sun4v_rtc_write() tracing fix that fell through the cracks
(Eduardo Habkost)
* Validation of "host-nodes" option on memory backends (Eduardo Habkost)
* memory-device fixes and cleanups (David Hildenbrand)

Cleanups:
* Machine-type code cleanup (remove unnecessary instance_init functions)
(Eduardo Habkost)
* qdev, qom, and global property code cleanups (Marc-André Lureau)
* PCMachineState field renames (Corey Minyard)
* numa: Match struct to typedef name (Eric Blake)
* hostmem-file: remove object id from pmem error message (Zhang Yi)

# gpg: Signature made Tue 11 Dec 2018 17:58:03 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (24 commits)
qom: remove unimplemented class_finalize
qdev: move qdev_prop_register_global_list() to tests
accel: register global_props like machine globals
qom: make user_creatable_complete() specific to UserCreatable
qom: make interface types abstract
tests: qdev_prop_check_globals() doesn't return "all_used"
pc: Use default_machine_opts to set suppress_vmdesc
spapr: Delete instance_options functions
spapr: Use default_machine_opts to set suppress_vmdesc
spapr: Use default_machine_opts to set use_hotplug_event_source
virt: Eliminate separate instance_init functions
q35/440fx/arm/spapr: Add QEMU 4.0 machine type
hostmem: Validate host-nodes before setting bitmap
numa: Match struct to typedef name
i386: Rename bools in PCMachineState to end in _enabled
move ObjectClass to typedefs.h
memory-device: avoid overflows on very huge devices
memory-device: use QEMU_IS_ALIGNED
range: pass const pointer where possible
Deprecate HMP `cpu-add`
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qom: make interface types abstract

Interfaces don't have instance, let's make the interface type really
abstract to avoid confusion.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
R

qom: make interface types abstract

Interfaces don't have instance, let's make the interface type really
abstract to avoid confusion.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-3-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* RTC fixes (Artem)
* icount fixes (Artem)
* rr fixes (Pavel, myself)
* hotplug cleanup (Igor)
* SCSI fixes (myself)
* 4

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* RTC fixes (Artem)
* icount fixes (Artem)
* rr fixes (Pavel, myself)
* hotplug cleanup (Igor)
* SCSI fixes (myself)
* 4.20-rc1 KVM header update (myself)
* coalesced PIO support (Peng Hao)
* HVF fixes (Roman B.)
* Hyper-V refactoring (Roman K.)
* Support for Hyper-V IPI (Vitaly)

# gpg: Signature made Fri 19 Oct 2018 12:47:58 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
replay: pass raw icount value to replay_save_clock
target/i386: kvm: just return after migrate_add_blocker failed
hyperv_testdev: add SynIC message and event testmodes
hyperv: process POST_MESSAGE hypercall
hyperv: add support for KVM_HYPERV_EVENTFD
hyperv: process SIGNAL_EVENT hypercall
hyperv: add synic event flag signaling
hyperv: add synic message delivery
hyperv: make overlay pages for SynIC
hyperv: only add SynIC in compatible configurations
hyperv: qom-ify SynIC
hyperv:synic: split capability testing and setting
i386: add hyperv-stub for CONFIG_HYPERV=n
default-configs: collect CONFIG_HYPERV* in hyperv.mak
hyperv: factor out arch-independent API into hw/hyperv
hyperv: make hyperv_vp_index inline
hyperv: split hyperv-proto.h into x86 and arch-independent parts
hyperv: rename kvm_hv_sint_route_set_sint
hyperv: make HvSintRoute reference-counted
hyperv: address HvSintRoute by X86CPU pointer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

call HotplugHandler->plug() as the last step in device realization

When [2] was fixed it was agreed that adding and calling post_plug()
callback after device_reset() was low risk approach to hotfix

call HotplugHandler->plug() as the last step in device realization

When [2] was fixed it was agreed that adding and calling post_plug()
callback after device_reset() was low risk approach to hotfix issue
right before release. So it was merged instead of moving already
existing plug() callback after device_reset() is called which would
be more risky and require all plug() callbacks audit.

Looking at the current plug() callbacks, it doesn't seem that moving
plug() callback after device_reset() is breaking anything, so here
goes agreed upon [3] proper fix which essentially reverts [1][2]
and moves plug() callback after device_reset().
This way devices always comes to plug() stage, after it's been fully
initialized (including being reset), which fixes race condition [2]
without need for an extra post_plug() callback.

1. (25e897881 "qdev: add HotplugHandler->post_plug() callback")
2. (8449bcf94 "virtio-scsi: fix hotplug ->reset() vs event race")
3. https://www.mail-archive.com/qemu-devel@nongnu.org/msg549915.html

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1539696820-273275-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Pierre Morel<pmorel@linux.ibm.com>
Acked-by: Pierre Morel<pmorel@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bug fixes.

# gpg: Signature made Tue 17 Jul 2018 16:06:07 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gp

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bug fixes.

# gpg: Signature made Tue 17 Jul 2018 16:06:07 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
Document command line options with single dash
opts: remove redundant check for NULL parameter
i386: only parse the initrd_filename once for multiboot modules
i386: fix regression parsing multiboot initrd modules
virtio-scsi: fix hotplug ->reset() vs event race
qdev: add HotplugHandler->post_plug() callback
hw/char/serial: retry write if EAGAIN
PC Chipset: Improve serial divisor calculation
vhost-user-test: added proper TestServer *dest initialization in test_migrate()
hyperv: ensure VP index equal to QEMU cpu_index
hyperv: rename vcpu_id to vp_index
accel: Fix typo and grammar in comment
dump: add kernel_gs_base to QEMU CPU state

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: add HotplugHandler->post_plug() callback

The ->pre_plug() callback is invoked before the device is realized. The
->plug() callback is invoked when the device is being realized but
before it i

qdev: add HotplugHandler->post_plug() callback

The ->pre_plug() callback is invoked before the device is realized. The
->plug() callback is invoked when the device is being realized but
before it is reset.

This patch adds a ->post_plug() callback which is invoked after the
device has been reset. This callback is needed by HotplugHandlers that
need to wait until after ->reset().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180716083732.3347-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'clg/aspeed'

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost, pc, pci: documentation, fixes and cleanups

Lots of fixes all over the place.

Unfortunately, this does not y

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost, pc, pci: documentation, fixes and cleanups

Lots of fixes all over the place.

Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (28 commits)
docs: add PCIe devices placement guidelines
virtio: drop virtio_queue_get_ring_{size,addr}()
vhost: drop legacy vring layout bits
vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout
nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
nvdimm acpi: use aml_name_decl to define named object
nvdimm acpi: rename nvdimm_dsm_reserved_root
nvdimm acpi: fix two comments
nvdimm acpi: define DSM return codes
nvdimm acpi: rename nvdimm_acpi_hotplug
nvdimm acpi: cleanup nvdimm_build_fit
nvdimm acpi: rename nvdimm_plugged_device_list
docs: improve the doc of Read FIT method
nvdimm acpi: clean up nvdimm_build_acpi
pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug
pc: memhp: move nvdimm hotplug out of memory hotplug
nvdimm acpi: drop the lock of fit buffer
qdev: hotplug: drop HotplugHandler.post_plug callback
vhost: migration blocker only if shared log is used
virtio-net: mark VIRTIO_NET_F_GSO as legacy
...

Message-id: 1479237527-11846-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

qdev: hotplug: drop HotplugHandler.post_plug callback

as nvdimm acpi is okay to build fit when the nvdimm device
has not been 'realized'

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off

qdev: hotplug: drop HotplugHandler.post_plug callback

as nvdimm acpi is okay to build fit when the nvdimm device
has not been 'realized'

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes and features

nvdimm hotplug support
virtio migration and ioeventfd rework
virtio crypto device
ipmi fixes

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes and features

nvdimm hotplug support
virtio migration and ioeventfd rework
virtio crypto device
ipmi fixes

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 01 Nov 2016 05:23:40 PM GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (47 commits)
acpi: fix assert failure caused by commit 35c5a52d
acpi/ipmi: Initialize the fwinfo before fetching it
ipmi: Add graceful shutdown handling to the external BMC
ipmi: fix build config variable name for ipmi_bmc_extern.o
ipmi: Implement shutdown via ACPI overtemp
ipmi: chassis poweroff should use qemu_system_shutdown_request()
ipmi_bmc_sim: Remove an unnecessary mutex
ipmi: Remove hotplug from IPMI BMCs
pc: memhp: enable nvdimm device hotplug
nvdimm acpi: introduce _FIT
nvdimm acpi: introduce fit buffer
nvdimm acpi: prebuild nvdimm devices for available slots
nvdimm acpi: use common macros instead of magic names
acpi nvdimm: rename result_size to dsm_out_buf_siz
nvdimm acpi: compile nvdimm acpi code arch-independently
acpi nvdimm: fix Arg6 usage
acpi nvdimm: fix ARG3 conflict
acpi nvdimm: fix device physical address base
acpi nvdimm: fix OperationRegion definition
acpi nvdimm: fix wrong buffer size returned by DSM method
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

nvdimm acpi: introduce fit buffer

The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, i

nvdimm acpi: introduce fit buffer

The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug

As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.

@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access

As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160617' into staging

ppc patch queue for 2016-06-17

Here's the current accumulated set of spapr, ppc and related patches.
* The bi

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160617' into staging

ppc patch queue for 2016-06-17

Here's the current accumulated set of spapr, ppc and related patches.
* The big thing in here is CPU hotplug for spapr
- This includes a number of acked generic changes adding new
infrastructure for hotplugging cpu cores
* A number of TCG bug fixes are also included
* This adds a new testcase to make it harder to accidentally break
Macintosh (and other openbios) platforms

# gpg: Signature made Fri 17 Jun 2016 07:35:29 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160617:
spapr: implement query-hotpluggable-cpus callback
hmp: Add 'info hotpluggable-cpus' HMP command
QMP: Add query-hotpluggable-cpus
spapr: CPU hot unplug support
spapr: CPU hotplug support
spapr: convert boot CPUs into CPU core devices
spapr: Move spapr_cpu_init() to spapr_cpu_core.c
spapr: Abstract CPU core device and type specific core devices
qom: API to get instance_size of a type
spapr_drc: Prevent detach racing against attach for CPU DR
xics,xics_kvm: Handle CPU unplug correctly
cpu: Abstract CPU core type
qdev: hotplug: Introduce HotplugHandler.pre_plug() callback
target-ppc: Fix rlwimi, rlwinm, rlwnm
vfio: Fix broken EEH
target-ppc: Bug in BookE wait instruction
ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully
hw/ppc/spapr: Silence deprecation message in qtest mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: hotplug: Introduce HotplugHandler.pre_plug() callback

pre_plug callback is to be called before device.realize() is executed.
This would allow to check/set device's properties from HotplugHandl

qdev: hotplug: Introduce HotplugHandler.pre_plug() callback

pre_plug callback is to be called before device.realize() is executed.
This would allow to check/set device's properties from HotplugHandler.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support

# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
scripts/clean-includes

show more ...

Use scripts/clean-includes to drop redundant qemu/typedefs.h

Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds

Use scripts/clean-includes to drop redundant qemu/typedefs.h

Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c. No idea
how that escaped the previous runs.

Some manual whitespace trimming around dropped includes squashed in.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-01-15' into staging

trivial patches for 2015-01-15

# gpg: Signature made Thu 15 Jan 2015 08:26:26 GMT using RSA key ID A4C3D

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-01-15' into staging

trivial patches for 2015-01-15

# gpg: Signature made Thu 15 Jan 2015 08:26:26 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-01-15:
vl.c: fix some alignment issues
blizzard: do not depend on VGA internals
Makefile: Remove config.status and common.env during 'make distclean'
target-openrisc: bugfix for dec_sys to decode instructions correctly
Do not hang on full PTY
misc: Fix new typos in comments
target-arm: Fix typo in comment (seperately -> separately)
target-tricore: Fix new typos
migration/qemu-file.c: Don't shift left into sign bit
translate-all: Mark map_exec() with the 'unused' attribute
tests/hd-geo-test.c: Remove unused test_image variable
vt82c686: avoid out-of-bounds read

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

misc: Fix new typos in comments

recieve -> receive
suprise -> surprise

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-

misc: Fix new typos in comments

recieve -> receive
suprise -> surprise

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* GPIO conversion to QOM, continued
* Device property descrip

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* GPIO conversion to QOM, continued
* Device property description support
* QTest cases for hotplug
* Hotplug handler conversion

# gpg: Signature made Wed 15 Oct 2014 04:05:17 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (47 commits)
qdev: Drop legacy_name from qdev properties
qmp: Print descriptions of object properties
qdev: Set the object property's description to the qdev property's.
qom: Add description field in ObjectProperty struct
qdev: Add description field in PropertyInfo struct
qdev: device_del: Search for to be unplugged device in 'peripheral' container
qdev: HotplugHandler: Add support for unplugging BUS-less devices
qdev: Drop legacy hotplug fields/methods
usb: Convert usb devices to hotplug handler API
usb: Convert usb-ccid to hotplug handler API
usb-storage: Drop not needed "allow_hotplug = 0"
usb-bot: Drop not needed "allow_hotplug = 0"
usb-bot: Mark device as non hotpluggable
scsi: Cleanup not used anymore SCSIBusInfo{hotplug, hot_unplug} fields
scsi: Convert virtio-scsi HBA to hotplug handler API
scsi: Convert pvscsi HBA to hotplug handler API
scsi: Set SCSI BUS itself as default HotplugHandler
s390x: Convert virtio-ccw to hotplug handler API
s390x: Convert s390-virtio to hotplug handler API
s390x: Drop not used allow_hotplug in event-facility
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: HotplugHandler: Provide unplug callback

It is to be called for actual device removal and
will allow to separate request and removal handling
phases of x86-CPU devices and also it's a handler
t

qdev: HotplugHandler: Provide unplug callback

It is to be called for actual device removal and
will allow to separate request and removal handling
phases of x86-CPU devices and also it's a handler
to be called for synchronously removable devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

show more ...

qdev: HotplugHandler: Rename unplug callback to unplug_request

'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplu

qdev: HotplugHandler: Rename unplug callback to unplug_request

'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>

show more ...