Merge tag 'pull-riscv-to-apply-20230505-1' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.1

* CPURISCVState related cleanup and simplification
* Refactor Zicond and reuse

Merge tag 'pull-riscv-to-apply-20230505-1' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.1

* CPURISCVState related cleanup and simplification
* Refactor Zicond and reuse in XVentanaCondOps
* Fix invalid riscv,event-to-mhpmcounters entry
* Support subsets of code size reduction extension
* Fix itrigger when icount is used
* Simplification for RVH related check and code style fix
* Add signature dump function for spike to run ACT tests
* Rework MISA writing
* Fix mstatus.MPP related support
* Use check for relationship between Zdinx/Zhinx{min} and Zfinx
* Fix the H extension TVM trap
* A large collection of mstatus sum changes and cleanups
* Zero init APLIC internal state
* Implement query-cpu-definitions
* Restore the predicate() NULL check behavior
* Fix Guest Physical Address Translation
* Make sure an exception is raised if a pte is malformed
* Add Ventana's Veyron V1 CPU

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmRUU48ACgkQr3yVEwxT
# gBP6gxAAyhmz7dKOPIb8RtUR4IT+SQhKYZEoSewy4xlXazZvh03K0jiYlEKcPLG+
# al50WlwL8ISsYwwpnatQr0deoeXnz9+qrSv7ikrzyqZScS8JTcJb/pdQnOz6WK3s
# 3FCBnBsYyjpdV6a2uCC9qck7xKTUpa9Gjx06DOuIoLfS8aFvf7Z3EbvsEyyDTEIi
# kwB0j5kdQkJLyx993F3atupjZSxvFmLJdtU4+IVYiOeBEVRD1iZth9KB9L9zjA49
# s+qTHg+afEr3GDlR02So9hYxyHqTHgRI8gkPaVN+ReEErC0nJNcx7/7tEhsLsswY
# fUAmsMnXaYOnEWFTJ+D/161rKx6QXwkX7bYCmPJFLGmzw5LWdK7JHEoXylRffuay
# Zh2e2tNky7QXPqp9fU0DBb9Xpbr0wHorLqFT8X8cuaI6r92weunZHx9zulhm11WA
# m0Q1UZaqAsnIL98UZocZr6C1hzR/OJ2QfjHDsKuPJEi8ylb7yRi4adcPn8YGBYX+
# 4YDNSvanegQq0g7gO3kSV/Cqweqm2xoDQyiRdyHWLQK2yJiZJTy07unzi+H7Dubf
# JR9bkdHTKz6Ywrf8hqw4yRqk5sPyamxHdXbhTDohUaPPQcfwQUraRdxIv1AQ94A1
# j+msUYpIZHjb5q2DtNHI1hQMdkVGRLMlfA8kpB+EcY1sXiqSky8=
# =fVG8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 May 2023 01:53:35 AM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230505-1' of https://github.com/alistair23/qemu: (89 commits)
target/riscv: add Ventana's Veyron V1 CPU
riscv: Make sure an exception is raised if a pte is malformed
target/riscv: Fix Guest Physical Address Translation
target/riscv: Restore the predicate() NULL check behavior
target/riscv: add TYPE_RISCV_DYNAMIC_CPU
target/riscv: add query-cpy-definitions support
target/riscv: add CPU QOM header
hw/intc/riscv_aplic: Zero init APLIC internal state
target/riscv: Reorg sum check in get_physical_address
target/riscv: Reorg access check in get_physical_address
target/riscv: Merge checks for reserved pte flags
target/riscv: Don't modify SUM with is_debug
target/riscv: Suppress pte update with is_debug
target/riscv: Move leaf pte processing out of level loop
target/riscv: Hoist pbmte and hade out of the level loop
target/riscv: Hoist second stage mode change to callers
target/riscv: Check SUM in the correct register
target/riscv: Set MMU_2STAGE_BIT in riscv_cpu_mmu_index
target/riscv: Move hstatus.spvp check to check_access_hlsv
target/riscv: Introduce mmuidx_2stage
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/riscv: Add signature dump function for spike to run ACT tests

Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data

hw/riscv: Add signature dump function for spike to run ACT tests

Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data.

Recgonize the signature section between begin_signature and end_signature symbols
when loading elf of ACT tests. Then dump signature data in signature section just
before the ACT tests exit.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for QEMU 8.0

* riscv_htif: Support console output via proxy syscall
* Cleanup firmware a

Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for QEMU 8.0

* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
# cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
# H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
# rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
# slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
# k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
# BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
# =ifFF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 07:38:37 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu: (37 commits)
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
target/riscv: Remove helper_set_rod_rounding_mode
target/riscv: Introduce helper_set_rounding_mode_chkfrm
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
target/riscv: Fix up masking of vsip/vsie accesses
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
hw/riscv/sifive_u.c: simplify create_fdt()
hw/riscv/virt.c: simplify create_fdt()
hw/riscv/spike.c: simplify create_fdt()
target/riscv: Use TARGET_FMT_lx for env->mhartid
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
target/riscv/cpu: set cpu->cfg in register_cpu_props()
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: spike: Decouple create_fdt() dependency to ELF loading

At present create_fdt() calls htif_uses_elf_symbols() to determine
whether to insert a <reg> property for the HTIF. This unfortunatel

hw/riscv: spike: Decouple create_fdt() dependency to ELF loading

At present create_fdt() calls htif_uses_elf_symbols() to determine
whether to insert a <reg> property for the HTIF. This unfortunately
creates a hidden dependency to riscv_load_{firmware,kernel} that
create_fdt() must be called after the ELF {firmware,kernel} image
has been loaded.

Decouple such dependency be adding a new parameter to create_fdt(),
whether custom HTIF base address is used. The flag will be set if
non ELF {firmware,kernel} image is given by user.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/char: riscv_htif: Remove forward declarations for non-existent variables

There are forward declarations for 'vmstate_htif' and 'htif_io_ops'
in riscv_htif.h however there are no definitions in th

hw/char: riscv_htif: Remove forward declarations for non-existent variables

There are forward declarations for 'vmstate_htif' and 'htif_io_ops'
in riscv_htif.h however there are no definitions in the C codes.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-7-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/char: riscv_htif: Move registers from CPUArchState to HTIFState

At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really

hw/char: riscv_htif: Move registers from CPUArchState to HTIFState

At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really
be put in the HTIFState struct as it is only meaningful to HTIF.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/char: riscv_htif: Drop useless assignment of memory region

struct HTIFState has 3 members for address space and memory region,
and are initialized during htif_mm_init(). But they are actually
use

hw/char: riscv_htif: Drop useless assignment of memory region

struct HTIFState has 3 members for address space and memory region,
and are initialized during htif_mm_init(). But they are actually
useless. Drop them.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/char: riscv_htif: Drop {to, from}host_size in HTIFState

These are not used anywhere. Drop them.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventana

hw/char: riscv_htif: Drop {to, from}host_size in HTIFState

These are not used anywhere. Drop them.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-3-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220121-1' into staging

Third RISC-V PR for QEMU 7.0

* Fixes for OpenTitan timer
* Correction of OpenTitan PLIC stride len

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220121-1' into staging

Third RISC-V PR for QEMU 7.0

* Fixes for OpenTitan timer
* Correction of OpenTitan PLIC stride length
* RISC-V KVM support
* Device tree code cleanup
* Support for the Zve64f and Zve32f extensions
* OpenSBI binary loading support for the Spike machine
* Removal of OpenSBI ELFs
* Support for the UXL field in xstatus

# gpg: Signature made Fri 21 Jan 2022 05:57:09 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20220121-1: (61 commits)
target/riscv: Relax UXL field for debugging
target/riscv: Enable uxl field write
target/riscv: Set default XLEN for hypervisor
target/riscv: Adjust scalar reg in vector with XLEN
target/riscv: Adjust vector address with mask
target/riscv: Fix check range for first fault only
target/riscv: Remove VILL field in VTYPE
target/riscv: Adjust vsetvl according to XLEN
target/riscv: Split out the vill from vtype
target/riscv: Split pm_enabled into mask and base
target/riscv: Calculate address according to XLEN
target/riscv: Alloc tcg global for cur_pm[mask|base]
target/riscv: Create current pm fields in env
target/riscv: Adjust csr write mask with XLEN
target/riscv: Relax debug check for pm write
target/riscv: Use gdb xml according to max mxlen
target/riscv: Extend pc for runtime pc write
target/riscv: Ignore the pc bits above XLEN
target/riscv: Create xl field in env
target/riscv: Sign extend pc for different XLEN
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: spike: Allow using binary firmware as bios

Currently, we have to use OpenSBI firmware ELF as bios for the spike
machine because the HTIF console requires ELF for parsing "fromhost"
and "to

hw/riscv: spike: Allow using binary firmware as bios

Currently, we have to use OpenSBI firmware ELF as bios for the spike
machine because the HTIF console requires ELF for parsing "fromhost"
and "tohost" symbols.

The latest OpenSBI can now optionally pick-up HTIF register address
from HTIF DT node so using this feature spike machine can now use
OpenSBI firmware BIN as bios.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allo

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/riscv/trace-events

show more ...

hw/riscv: Move riscv_htif model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move riscv_ht

hw/riscv: Move riscv_htif model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move riscv_htif model to hw/char directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...