Merge tag 'pull-target-arm-20231019' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder
* hw/arm/e

Merge tag 'pull-target-arm-20231019' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder
* hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot'
* xlnx devices: remove deprecated device reset
* xlnx-bbram: hw/nvram: Use dot in device type name
* elf2dmp: fix coverity issues
* elf2dmp: convert to g_malloc, g_new and g_free
* target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0
* hw/arm: refactor virt PPI logic
* arm/kvm: convert to kvm_set_one_reg, kvm_get_one_reg
* target/arm: Permit T32 LDM with single register
* smmuv3: Advertise SMMUv3.1-XNX
* target/arm: Implement FEAT_HPMN0
* Remove some unnecessary include lines
* target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL
* hw/timer/npcm7xx_timer: Prevent timer from counting down past zero

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmUxMF4ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oJND/4p64q0Wxq8x8yXCDUZAHME
# lZe2liBPBkqZusGfK0O4CpClwGbM5+8tMeLaRgSOUgJ/WGFiLCGAKEKB0S7EiCa5
# 1bNvVn+a7cdDj7FdYf+Dvp5fNZZIus4w+CUlUaiRyDhIfYquz53J1RD1wN5+SQ/I
# g6JQRp2gONeqGM5hT+0v2J/wGMmhuI5XO+PtQ1QNGoUnAA4QNof1thYjqdTJxzfz
# V2CUSOKnAT/PDcUWoy8BVPDDE+wYTnjTO1j/ZsQvnNQm7r18OiMUn85teLq1JtB+
# T3vyVZ2f2gc8lAgkKy5n3NH5fmLVgbO0WXgpWLHNkcp+shZMM6J5J/u/P6B/wk95
# DMzQy4slu/UfWMvsaxq+OjejhAtbdiIOeNfF6dAMy2NAyZplEAjlP8dsFrqAdACL
# 9m/DA4ODAV6OJ3E0zQ0dI4o6kr+/wbPVseLklqn3Ss0dndjU1K9XR0qpC8OruUJq
# 4h6kl5q6V3BHAoELvBtAqb0yHYdqhLqznpO8HsrUEmU5eTjDaOyyI4HW+AY5GG1R
# dtvrCLSiPe0EMartMMtezaB2GxQb9O7e+OI3XL2zVxb1F+QQ+vRZE3zVIdXm+Ev4
# oBztF1peZC3c8zurjr7/MxnDSnzynpkSR1zOY8+WJnAqpQ+C1YvdF6/Llwn7IMHw
# ZHh6sGzQsaAu7u/DW9yY5w==
# =WreO
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 06:34:22 PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20231019' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits)
contrib/elf2dmp: Use g_malloc(), g_new() and g_free()
hw/timer/npcm7xx_timer: Prevent timer from counting down past zero
target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL
target/arm/common-semi-target.h: Remove unnecessary boot.h include
target/arm/kvm64.c: Remove unused include
target/arm: Implement FEAT_HPMN0
hw/arm/smmuv3: Advertise SMMUv3.1-XNX feature
hw/arm/smmuv3: Sort ID register setting into field order
hw/arm/smmuv3: Update ID register bit field definitions
target/arm: Permit T32 LDM with single register
arm/kvm: convert to kvm_get_one_reg
arm/kvm: convert to kvm_set_one_reg
hw/arm/sbsa-ref: use bsa.h for PPI definitions
include/hw/arm: move BSA definitions to bsa.h
{include/}hw/arm: refactor virt PPI logic
target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0
elf2dmp: check array bounds in pdb_get_file_size
elf2dmp: limit print length for sign_rsds
xlnx-bbram: hw/nvram: Use dot in device type name
xlnx-versal-efuse: hw/nvram: Remove deprecated device reset
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot.h'

struct arm_boot_info is declared in "hw/arm/boot.h".
By including the correct header we don't need to declare
it again in "targe

hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot.h'

struct arm_boot_info is declared in "hw/arm/boot.h".
By including the correct header we don't need to declare
it again in "target/arm/cpu-qom.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231013130214.95742-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Various code cleanups
* More refactoring working towards allowing a build

Merge tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Various code cleanups
* More refactoring working towards allowing a build
without CONFIG_TCG

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmP8ty0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3na0EACToAEGC4/iFigdKD7ZwG3F
# FvoDcMRRSdElcSo7BTDrFBBOH5/BYhorUq+mVpPvEYADXNaPOCmXWieSJpu68sJC
# VpVLPMhGS8lTsT16C2vB/4Lh4t8pJgs7aej90nqKk2rGgKw4ZNwMS+7Eg6n2lKf/
# V27+O+drJxgYzO6feveuKtIQXsHkx4//DNOCDPLLvrrOk+1NWnyPyT/UDxV/emyr
# KLBbeXqcNhPkn7xZtvM7WARSHZcqhEPBkIAJG2H9HE4imxNm8d8ADZjEMbfE9ZNE
# MDanpM6BYYDWw4y2A8J5QmbiLu3znH8RWmWHww1v6UQ7qyBCLx+HyEGKipGd3Eoe
# 48hi/ktsAJUb1lRrk9gOJ+NsokGINzI5urFOReUh1q6+5us0Q0VpwjyVvhi8REy3
# 5gOMDC7O2zH+bLN08kseDXfc7vR9wLrIHqMloMgJzpjG5KcL67nVCPHcOwxe0sfn
# 0SYWUY0UFNSYgEGBG6JfM6LiM1lRREzlw6YnnaJ+GUf/jdIUbMV6PKpL34TGLeQ3
# xEWrKV0+PMoWHwN0Pdo1tMXm7mc/9H27Mf7hB5k0Hp3dfQ7nIdkfnFA2YEUSxIQt
# OXYsKLTJmO/4XIAYCHhIOncPTmM6KWNQajDJMIuEdYYV67Xb88EIv5Hg8q6tS/mN
# uuQfun3Z2UbAtGvzN5Yx1w==
# =K0Vo
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 13:59:09 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm: (25 commits)
hw: Replace qemu_or_irq typedef by OrIRQState
hw/or-irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
hw/irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
iothread: Remove unused IOThreadClass / IOTHREAD_CLASS
hw/arm/musicpal: Remove unused dummy MemoryRegion
hw/intc/armv7m_nvic: Use QOM cast CPU() macro
hw/timer/cmsdk-apb-timer: Remove unused 'qdev-properties.h' header
hw/char/cmsdk-apb-uart: Open-code cmsdk_apb_uart_create()
hw/char/xilinx_uartlite: Open-code xilinx_uartlite_create()
hw/char/xilinx_uartlite: Expose XILINX_UARTLITE QOM type
hw/char/pl011: Open-code pl011_luminary_create()
hw/char/pl011: Un-inline pl011_create()
hw/gpio/max7310: Simplify max7310_realize()
tests/avocado: add machine:none tag to version.py
cpu-defs.h: Expose CPUTLBEntryFull to non-TCG code
target/arm: Don't access TCG code when debugging with KVM
target/arm: Move regime_using_lpae_format into internal.h
target/arm: Move hflags code into the tcg directory
target/arm: Wrap arm_rebuild_hflags calls with tcg_enabled
target/arm: Move psci.c into the tcg directory
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Replace qemu_or_irq typedef by OrIRQState

OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, an

hw: Replace qemu_or_irq typedef by OrIRQState

OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.

Mechanical change using:

$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: A

Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
hw/misc: Add PWRON STRAP bit fields in GCR module
hw/arm/virt: impact of gic-version on max CPUs
hw/core/irq: remove unused 'qemu_irq_split' function
hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/exynos4210: Drop Exynos4210Irq struct
hw/arm/exynos4210: Put combiners into state struct
hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
hw/arm/exynos4210: Delete unused macro definitions
hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
hw/arm/exynos4210: Put external GIC into state struct
hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
hw/arm/exynos4210: Coalesce board_irqs and irq_table
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/arm/exynos4210: Drop Exynos4210Irq struct

The only time we use the int_combiner_irq[] and ext_combiner_irq[]
arrays in the Exynos4210Irq struct is during realize of the SoC -- we
initialize them

hw/arm/exynos4210: Drop Exynos4210Irq struct

The only time we use the int_combiner_irq[] and ext_combiner_irq[]
arrays in the Exynos4210Irq struct is during realize of the SoC -- we
initialize them with the input IRQs of the combiner devices, and then
connect those to outputs of other devices in
exynos4210_init_board_irqs(). Now that the combiner objects are
easily accessible as s->int_combiner and s->ext_combiner we can make
the connections directly from one device to the other without going
via these arrays.

Since these are the only two remaining elements of Exynos4210Irq,
we can remove that struct entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-19-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Put combiners into state struct

Switch the creation of the combiner devices to the new-style
"embedded in state struct" approach, so we can easily refer
to the object elsewhere du

hw/arm/exynos4210: Put combiners into state struct

Switch the creation of the combiner devices to the new-style
"embedded in state struct" approach, so we can easily refer
to the object elsewhere during realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-18-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()

At this point, the function exynos4210_init_board_irqs() splits input
IRQ lines to connect them to the input combiner, outpu

hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()

At this point, the function exynos4210_init_board_irqs() splits input
IRQ lines to connect them to the input combiner, output combiner and
external GIC. The function exynos4210_combiner_get_gpioin() splits
some of the combiner input lines further to connect them to multiple
different inputs on the combiner.

Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a
configurable number of outputs, we can do all this in one place, by
making exynos4210_init_board_irqs() add extra outputs to the splitter
device when it must be connected to more than one input on each
combiner.

We do this with a new data structure, the combinermap, which is an
array each of whose elements is a list of the interrupt IDs on the
combiner which must be tied together. As we loop through each
interrupt ID, if we find that it is the first one in one of these
lists, we configure the splitter device with eonugh extra outputs and
wire them up to the other interrupt IDs in the list.

Conveniently, for all the cases where this is necessary, the
lowest-numbered interrupt ID in each group is in the range of the
external combiner, so we only need to code for this in the first of
the two loops in exynos4210_init_board_irqs().

The old code in exynos4210_combiner_get_gpioin() which is being
deleted here had several problems which don't exist in the new code
in its handling of the multi-core timer interrupts:
(1) the case labels specified bits 4 ... 8, but bit '8' doesn't
exist; these should have been 4 ... 7
(2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]
multiple times as the input of several different splitters,
which isn't allowed
(3) in an apparent cut-and-paste error, the cases for all the
multi-core timer inputs used "bit + 4" even though the
bit range for the case was (intended to be) 4 ... 7, which
meant it was looking at non-existent bits 8 ... 11.
None of these exist in the new code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-17-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs

The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0
and EXT_GIC_ID_MCT_G1 multiple times. This means that we will

hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs

The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0
and EXT_GIC_ID_MCT_G1 multiple times. This means that we will
connect multiple IRQs up to the same external GIC input, which
is not permitted. We do the same thing in the code in
exynos4210_init_board_irqs() because the conditionals selecting
an irq_id in the first loop match multiple interrupt IDs.

Overall we do this for interrupt IDs
(1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0
and
(1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1

These correspond to the cases for the multi-core timer that we are
wiring up to multiple inputs on the combiner in
exynos4210_combiner_get_gpioin(). That code already deals with all
these interrupt IDs being the same input source, so we don't need to
connect the external GIC interrupt for any of them except the first
(1, 4) and (1, 5). Remove the array entries and conditionals which
were incorrectly causing us to wire up extra lines.

This bug didn't cause any visible effects, because we only connect
up a device to the "primary" ID values (1, 4) and (1, 5), so the
extra lines would never be set to a level.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-16-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()

In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device
instead of qemu_irq_split().

Signed-off-by: Peter Maydell <peter

hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()

In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device
instead of qemu_irq_split().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-13-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Delete unused macro definitions

Delete a couple of #defines which are never used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.

hw/arm/exynos4210: Delete unused macro definitions

Delete a couple of #defines which are never used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-12-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c

The function exynos4210_combiner_get_gpioin() currently lives in
exynos4210_combiner.c, but it isn't really part of the com

hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c

The function exynos4210_combiner_get_gpioin() currently lives in
exynos4210_combiner.c, but it isn't really part of the combiner
device itself -- it is a function that implements the wiring up of
some interrupt sources to multiple combiner inputs. Move it to live
with the other SoC-level code in exynos4210.c, along with a few
macros previously defined in exynos4210.h which are now used only
in exynos4210.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-11-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct

The only time we use the ext_gic_irq[] array in the Exynos4210Irq
struct is during realize of the SoC -- we initialize it with the
inp

hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct

The only time we use the ext_gic_irq[] array in the Exynos4210Irq
struct is during realize of the SoC -- we initialize it with the
input IRQs of the external GIC device, and then connect those to
outputs of other devices further on in realize (including in the
exynos4210_init_board_irqs() function). Now that the ext_gic object
is easily accessible as s->ext_gic we can make the connections
directly from one device to the other without going via this array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-10-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Put external GIC into state struct

Switch the creation of the external GIC to the new-style "embedded in
state struct" approach, so we can easily refer to the object
elsewhere dur

hw/arm/exynos4210: Put external GIC into state struct

Switch the creation of the external GIC to the new-style "embedded in
state struct" approach, so we can easily refer to the object
elsewhere during realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-9-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c

The function exynos4210_init_board_irqs() currently lives in
exynos4210_gic.c, but it isn't really part of the exynos4210.gic
d

hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c

The function exynos4210_init_board_irqs() currently lives in
exynos4210_gic.c, but it isn't really part of the exynos4210.gic
device -- it is a function that implements (some of) the wiring up of
interrupts between the SoC's GIC and combiner components. This means
it fits better in exynos4210.c, which is the SoC-level code. Move it
there. Similarly, exynos4210_git_irq() is used almost only in the
SoC-level code, so move it too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-8-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Coalesce board_irqs and irq_table

The exynos4210 code currently has two very similar arrays of IRQs:

* board_irqs is a field of the Exynos4210Irq struct which is filled
in by

hw/arm/exynos4210: Coalesce board_irqs and irq_table

The exynos4210 code currently has two very similar arrays of IRQs:

* board_irqs is a field of the Exynos4210Irq struct which is filled
in by exynos4210_init_board_irqs() with the appropriate qemu_irqs
for each IRQ the board/SoC can assert
* irq_table is a set of qemu_irqs pointed to from the
Exynos4210State struct. It's allocated in exynos4210_init_irq,
and the only behaviour these irqs have is that they pass on the
level to the equivalent board_irqs[] irq

The extra indirection through irq_table is unnecessary, so coalesce
these into a single irq_table[] array as a direct field in
Exynos4210State which exynos4210_init_board_irqs() fills in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-6-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct

The only time we use the int_gic_irq[] array in the Exynos4210Irq
struct is in the exynos4210_realize() function: we initialize it wit

hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct

The only time we use the int_gic_irq[] array in the Exynos4210Irq
struct is in the exynos4210_realize() function: we initialize it with
the GPIO inputs of the a9mpcore device, and then a bit later on we
connect those to the outputs of the internal combiner. Now that the
a9mpcore object is easily accessible as s->a9mpcore we can make the
connection directly from one device to the other without going via
this array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-5-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Put a9mpcore device into state struct

The exynos4210 SoC mostly creates its child devices as if it were
board code. This includes the a9mpcore object. Switch that to a
new-style

hw/arm/exynos4210: Put a9mpcore device into state struct

The exynos4210 SoC mostly creates its child devices as if it were
board code. This includes the a9mpcore object. Switch that to a
new-style "embedded in the state struct" creation, because in the
next commit we're going to want to refer to the object again further
down in the exynos4210_realize() function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-4-peter.maydell@linaro.org

show more ...

hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device

The Exynos4210 SoC device currently uses a custom device
"exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ
line

hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device

The Exynos4210 SoC device currently uses a custom device
"exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ
line. We have a standard TYPE_OR_IRQ device for this now, so use
that instead.

(This is a migration compatibility break, but that is OK for this
machine type.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-2-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic_cast_assert() documentation (Eduardo Habkost)
* Ensure objects using QEMU_ALIGNED are properly aligned (Richard Henderson)

QOM cleanups (Eduardo Habkost):
* Rename some constants
* Simplify parameters of OBJECT_DECLARE* macros
* Additional DECLARE_*CHECKER* usage
* Additional OBJECT_DECLARE_TYPE usage
* Additional OBJECT_DECLARE_SIMPLE_TYPE usage

# gpg: Signature made Fri 18 Sep 2020 21:45:29 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
Use OBJECT_DECLARE_TYPE when possible
qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros
qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE
scripts/codeconverter: Update to latest version
target/s390x: Set instance_align on S390CPU TypeInfo
target/riscv: Set instance_align on RISCVCPU TypeInfo
target/ppc: Set instance_align on PowerPCCPU TypeInfo
target/arm: Set instance_align on CPUARM TypeInfo
qom: Allow objects to be allocated with increased alignment
qom: Correct error values in two contracts
qom: Clean up object_property_get_enum()'s error value
qom: Correct object_class_dynamic_cast_assert() documentation
sifive: Use DECLARE_*CHECKER* macros
sifive: Move QOM typedefs and add missing includes
sifive_u: Rename memmap enum constants
sifive_e: Rename memmap enum constants

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--patte

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habk

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redha

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200123-4' into staging

target-arm queue:
* fix bug in PAuth emulation
* add PMU to Cortex-R5, Cortex-R5F
* qemu-nbd: Convert

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200123-4' into staging

target-arm queue:
* fix bug in PAuth emulation
* add PMU to Cortex-R5, Cortex-R5F
* qemu-nbd: Convert documentation to rST
* qemu-block-drivers: Convert documentation to rST
* Fix Exynos4210 UART DMA support
* Various minor code cleanups

# gpg: Signature made Thu 23 Jan 2020 16:35:38 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200123-4:
hw/arm/exynos4210: Connect serial port DMA busy signals with pl330
hw/char/exynos4210_uart: Add receive DMA support
hw/char/exynos4210_uart: Implement Rx FIFO level triggers and timeouts
hw/char/exynos4210_uart: Implement post_load function
hw/char/exynos4210_uart: Convert to support tracing
hw/arm/exynos4210: Fix DMA initialization
hw/core/or-irq: Increase limit of or-lines to 48
dma/pl330: Convert to support tracing
hw/misc/stm32f4xx_syscfg: Fix copy/paste error
target/arm/arch_dump: Add SVE notes
qemu-block-drivers: Convert to rST
docs: Create stub system manual
qemu-nbd: Convert invocation documentation to rST
hw/arm: Use helper function to trigger hotplug handler plug
hw/acpi: Remove extra indent in ACPI GED hotplug cb
tests/tcg/aarch64: Add pauth-4
tests/tcg/aarch64: Add pauth-3
tests/tcg/aarch64: Fix compilation parameters for pauth-%
target/arm: Fix PAuth sbox functions
target/arm: add PMU feature to cortex-r5 and cortex-r5f

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...