Merge tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Some of the preliminary patches for Cortex-A710 support
* i.MX7 and i.MX6UL

Merge tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Some of the preliminary patches for Cortex-A710 support
* i.MX7 and i.MX6UL refactoring
* Implement SRC device for i.MX7
* Catch illegal-exception-return from EL3 with bad NSE/NS
* Use 64-bit offsets for holding time_t differences in RTC devices
* Model correct number of MPU regions for an505, an521, an524 boards

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmTwbukZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3ihBD/wK8Iz0KpTAwZBDAodnSZrh
# tQnJAvYFp8CxA4O8sZ9IeWsZh90gzsTCZi0NqUTTzvWCJfxkB7qTPdlJT5IzVxou
# oEUk2aogSJhRA3XRJzqArXsPlnZGSYDbtwKx4VtfCvOCCH08Y7nhnFaRj1oFnR4Q
# 0PE/8YtGXTBxLHrO8U3tomg7zElzOUP8ZVZtb30BOyw1jtfSD03IZR8dzpA43u1E
# Hh418WvVekmwFoFNh8yUeHzbyXMZufzvbJPuDGJ8pPWwIpvSG6chOnKF8jZll+Ur
# DqOsDkGlQgcBR2QwYfSPClrEkX8yahJ95PBfM6giG+DQC7OiElqXqTiUGZcpgUVo
# uSUbzS4YPsxCnyVV6SBXV+f/8hdXBxOSHTgl7OAFa8X9OwWwspxHJ/v2o/2ibnUT
# hTTkFp/w1nQwVEN8xf1DOUpm/J2Wr8UeH4f776daSrfKAol2BKbHb8dOgGLQCwqb
# G+iDcE4bkzRqly6f+uVk8xSEZDd9P1NYoxKV+gNlV1dTspdHVpTC+rXMa8dRw5hI
# 4KgaAslj++Xa229xkjORXCJ1cICRIebYg7+SjvTtGBYsFV7plsCcYb/R9yLmhVCf
# fKHKKaYe9sQJ82apOIkTc+nnW8BQQx6XUmU/A//iZ8JGLk6DpJcZ8f1m/2rVZTsl
# 9+lsmpBf4w+uR4o+Womhfw==
# =MFh3
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Aug 2023 06:43:53 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits)
hw/arm: Set number of MPU regions correctly for an505, an521, an524
hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties
target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init
rtc: Use time_t for passing and returning time offsets
hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference
hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec
hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm()
target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS
Add i.MX7 SRC device implementation
Add i.MX7 missing TZ devices and memory regions
Refactor i.MX7 processor code
Add i.MX6UL missing devices.
Refactor i.MX6UL processor code
Remove i.MX7 IOMUX GPR device from i.MX6UL
target/arm: properly document FEAT_CRC32
target/arm: Implement FEAT_HPDS2 as a no-op
target/arm: Suppress FEAT_TRBE (Trace Buffer Extension)
target/arm: Apply access checks to neoverse-v1 special registers
target/arm: Apply access checks to neoverse-n1 special registers
target/arm: Introduce make_ccsidr64
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/arm: Set number of MPU regions correctly for an505, an521, an524

The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The
MPS2/MPS3 FPGA images don't override these except in the case of

hw/arm: Set number of MPU regions correctly for an505, an521, an524

The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The
MPS2/MPS3 FPGA images don't override these except in the case of
AN547, which uses 16 MPU regions.

Define properties on the ARMSSE object for the MPU regions (using the
same names as the documented RTL configuration settings, and
following the pattern we already have for this device of using
all-caps names as the RTL does), and set them in the board code.

We don't actually need to override the default except on AN547,
but it's simpler code to have the board code set them always
rather than tracking which board subtypes want to set them to
a non-default value separately from what that value is.

Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524
we now correctly use 8 MPU regions, while mps3-an547 stays at its
current 16 regions.

It's possible some guest code wrongly depended on the previous
incorrectly modeled number of memory regions. (Such guest code
should ideally check the number of regions via the MPU_TYPE
register.) The old behaviour can be obtained with additional
-global arguments to QEMU:

For mps2-an521 and mps2-an524:
-global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16

For mps2-an505:
-global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16

NB that the way the implementation allows this use of -global
is slightly fragile: if the board code explicitly sets the
properties on the sse-200 object, this overrides the -global
command line option. So we rely on:
- the boards that need fixing all happen to use the SSE defaults
- we can write the board code to only set the property if it
is different from the default, rather than having all boards
explicitly set the property
- the board that does need to use a non-default value happens
to need to set it to the same value (16) we previously used
This works, but there are some kinds of refactoring of the
mps2-tz.c code that would break the support for -global here.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org

show more ...

Merge tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Various code cleanups
* More refactoring working towards allowing a build

Merge tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Various code cleanups
* More refactoring working towards allowing a build
without CONFIG_TCG

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmP8ty0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3na0EACToAEGC4/iFigdKD7ZwG3F
# FvoDcMRRSdElcSo7BTDrFBBOH5/BYhorUq+mVpPvEYADXNaPOCmXWieSJpu68sJC
# VpVLPMhGS8lTsT16C2vB/4Lh4t8pJgs7aej90nqKk2rGgKw4ZNwMS+7Eg6n2lKf/
# V27+O+drJxgYzO6feveuKtIQXsHkx4//DNOCDPLLvrrOk+1NWnyPyT/UDxV/emyr
# KLBbeXqcNhPkn7xZtvM7WARSHZcqhEPBkIAJG2H9HE4imxNm8d8ADZjEMbfE9ZNE
# MDanpM6BYYDWw4y2A8J5QmbiLu3znH8RWmWHww1v6UQ7qyBCLx+HyEGKipGd3Eoe
# 48hi/ktsAJUb1lRrk9gOJ+NsokGINzI5urFOReUh1q6+5us0Q0VpwjyVvhi8REy3
# 5gOMDC7O2zH+bLN08kseDXfc7vR9wLrIHqMloMgJzpjG5KcL67nVCPHcOwxe0sfn
# 0SYWUY0UFNSYgEGBG6JfM6LiM1lRREzlw6YnnaJ+GUf/jdIUbMV6PKpL34TGLeQ3
# xEWrKV0+PMoWHwN0Pdo1tMXm7mc/9H27Mf7hB5k0Hp3dfQ7nIdkfnFA2YEUSxIQt
# OXYsKLTJmO/4XIAYCHhIOncPTmM6KWNQajDJMIuEdYYV67Xb88EIv5Hg8q6tS/mN
# uuQfun3Z2UbAtGvzN5Yx1w==
# =K0Vo
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 13:59:09 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230227' of https://git.linaro.org/people/pmaydell/qemu-arm: (25 commits)
hw: Replace qemu_or_irq typedef by OrIRQState
hw/or-irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
hw/irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
iothread: Remove unused IOThreadClass / IOTHREAD_CLASS
hw/arm/musicpal: Remove unused dummy MemoryRegion
hw/intc/armv7m_nvic: Use QOM cast CPU() macro
hw/timer/cmsdk-apb-timer: Remove unused 'qdev-properties.h' header
hw/char/cmsdk-apb-uart: Open-code cmsdk_apb_uart_create()
hw/char/xilinx_uartlite: Open-code xilinx_uartlite_create()
hw/char/xilinx_uartlite: Expose XILINX_UARTLITE QOM type
hw/char/pl011: Open-code pl011_luminary_create()
hw/char/pl011: Un-inline pl011_create()
hw/gpio/max7310: Simplify max7310_realize()
tests/avocado: add machine:none tag to version.py
cpu-defs.h: Expose CPUTLBEntryFull to non-TCG code
target/arm: Don't access TCG code when debugging with KVM
target/arm: Move regime_using_lpae_format into internal.h
target/arm: Move hflags code into the tcg directory
target/arm: Wrap arm_rebuild_hflags calls with tcg_enabled
target/arm: Move psci.c into the tcg directory
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Replace qemu_or_irq typedef by OrIRQState

OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, an

hw: Replace qemu_or_irq typedef by OrIRQState

OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.

Mechanical change using:

$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210525' into staging

target-arm queue:
* Implement SVE2 emulation
* Implement integer matrix multiply accumulate
* Implement

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210525' into staging

target-arm queue:
* Implement SVE2 emulation
* Implement integer matrix multiply accumulate
* Implement FEAT_TLBIOS
* Implement FEAT_TLBRANGE
* disas/libvixl: Protect C system header for C++ compiler
* Use correct SP in M-profile exception return
* AN524, AN547: Correct modelling of internal SRAMs
* hw/intc/arm_gicv3_cpuif: Fix EOIR write access check logic
* hw/arm/smmuv3: Another range invalidation fix

# gpg: Signature made Tue 25 May 2021 16:02:25 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210525: (114 commits)
target/arm: Enable SVE2 and related extensions
linux-user/aarch64: Enable hwcap bits for sve2 and related extensions
target/arm: Implement integer matrix multiply accumulate
target/arm: Implement aarch32 VSUDOT, VUSDOT
target/arm: Split decode of VSDOT and VUDOT
target/arm: Split out do_neon_ddda
target/arm: Fix decode for VDOT (indexed)
target/arm: Remove unused fpst from VDOT_scalar
target/arm: Split out do_neon_ddda_fpst
target/arm: Implement aarch64 SUDOT, USDOT
target/arm: Implement SVE2 fp multiply-add long
target/arm: Move endian adjustment macros to vec_internal.h
target/arm: Implement SVE2 bitwise shift immediate
target/arm: Implement 128-bit ZIP, UZP, TRN
target/arm: Implement SVE2 LD1RO
target/arm: Tidy do_ldrq
target/arm: Share table of sve load functions
target/arm: Implement SVE2 FLOGB
target/arm: Implement SVE2 FCVTXNT, FCVTX
target/arm: Implement SVE2 FCVTLT
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Model TCMs in the SSE-300, not the AN547

The SSE-300 has an ITCM at 0x0000_0000 and a DTCM at 0x2000_0000.
Currently we model these in the AN547 board, but this is conceptually
wrong, becaus

hw/arm: Model TCMs in the SSE-300, not the AN547

The SSE-300 has an ITCM at 0x0000_0000 and a DTCM at 0x2000_0000.
Currently we model these in the AN547 board, but this is conceptually
wrong, because they are a part of the SSE-300 itself. Move the
modelling of the TCMs out of mps2-tz.c into sse300.c.

This has no guest-visible effects.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-7-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging

target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implemen

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging

target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()

# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
hw/ssi: xilinx_spips: Clean up coding convention issues
hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
hw/arm: xlnx-zynqmp: Clean up coding convention issues
hw/dma: Implement a Xilinx CSU DMA model
target/arm: Restrict v7A TCG cpus to TCG accel
tests/qtest/sse-timer-test: Test counter scaling changes
tests/qtest/sse-timer-test: Test the system timer
tests/qtest/sse-timer-test: Add simple test of the SSE counter
docs/system/arm/mps2.rst: Document the new mps3-an547 board
hw/arm/mps2-tz: Add new mps3-an547 board
hw/arm/mps2-tz: Make initsvtor0 setting board-specific
hw/arm/mps2-tz: Support running APB peripherals on different clock
hw/misc/mps2-scc: Implement changes for AN547
hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
hw/arm/mps2-tz: Make UART overflow IRQ board-specific
hw/arm/armsse: Add SSE-300 support
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/armsse: Add SSE-300 support

Now we have sufficiently parameterised the code, we can add SSE-300
support by adding a new entry to the armsse_variants[] array.

Note that the main watchdog (unl

hw/arm/armsse: Add SSE-300 support

Now we have sufficiently parameterised the code, we can add SSE-300
support by adding a new entry to the armsse_variants[] array.

Note that the main watchdog (unlike the s32k watchdog) in the SSE-300
is a different device from the CMSDK watchdog; we don't have a model
of it so we leave it as a TYPE_UNIMPLEMENTED_DEVICE stub.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-36-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Support variants with ARMSSE_CPU_PWRCTRL block

Support SSE variants like the SSE-300 with an ARMSSE_CPU_PWRCTRL register
block. Because this block is per-CPU and does not clash with a

hw/arm/armsse: Support variants with ARMSSE_CPU_PWRCTRL block

Support SSE variants like the SSE-300 with an ARMSSE_CPU_PWRCTRL register
block. Because this block is per-CPU and does not clash with any of the
SSE-200 devices, we handle it with a has_cpu_pwrctrl flag like the
existing has_cachectrl, has_cpusectrl and has_cpuid, rather than
trying to add per-CPU-device support to the devinfo array handling code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-35-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Add support for TYPE_SSE_TIMER in ARMSSEDeviceInfo

The SSE-300 has four timers of type TYPE_SSE_TIMER; add support in
the code for having these in an ARMSSEDeviceInfo array.

Signed-o

hw/arm/armsse: Add support for TYPE_SSE_TIMER in ARMSSEDeviceInfo

The SSE-300 has four timers of type TYPE_SSE_TIMER; add support in
the code for having these in an ARMSSEDeviceInfo array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-34-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Add support for SSE variants with a system counter

The SSE-300 has a system counter device; add support for SSE
variants having this device.

As with the existing devices like the cac

hw/arm/armsse: Add support for SSE variants with a system counter

The SSE-300 has a system counter device; add support for SSE
variants having this device.

As with the existing devices like the cache control block, CPUID
block, etc, we don't try to make the MMIO addresses configurable. We
can do that if and when we need to model a future SSE variant which
has the counter in a different location.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-33-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Add missing SSE-200 SYS_PPU

We forgot to implement a TYPE_UNIMPLEMENTED_DEVICE stub
for the SYS_PPU in the SSE-200, which is at 0x50022000.

Signed-off-by: Peter Maydell <peter.maydel

hw/arm/armsse: Add missing SSE-200 SYS_PPU

We forgot to implement a TYPE_UNIMPLEMENTED_DEVICE stub
for the SYS_PPU in the SSE-200, which is at 0x50022000.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-31-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Move PPUs into data-driven framework

Move the PPUs into the data-driven device placement framework.
We don't implement them, so they are just TYPE_UNIMPLEMENTED stubs.

Because the SS

hw/arm/armsse: Move PPUs into data-driven framework

Move the PPUs into the data-driven device placement framework.
We don't implement them, so they are just TYPE_UNIMPLEMENTED stubs.

Because the SSE-200 and the IotKit diverge here (the IoTKit does
not have the PPUs) we need to separate out the ARMSSEDeviceInfo
for the two variants, and only add the PPUs to the SSE-200.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-30-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Move s32ktimer into data-driven framework

Move the CMSDK timer that uses the S32K slow clock into the data-driven
device placement framework.

Signed-off-by: Peter Maydell <peter.mayd

hw/arm/armsse: Move s32ktimer into data-driven framework

Move the CMSDK timer that uses the S32K slow clock into the data-driven
device placement framework.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-27-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Move watchdogs into data-driven framework

Move the CMSDK watchdog device handling into the data-driven device
placement framework. This is slightly more complicated because these
dev

hw/arm/armsse: Move watchdogs into data-driven framework

Move the CMSDK watchdog device handling into the data-driven device
placement framework. This is slightly more complicated because these
devices might wire their IRQs up to the NMI line, and because one of
them uses the slow 32KHz clock rather than the main clock.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-26-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Add framework for data-driven device placement

The SSE-300 is mostly the same as the SSE-200, but it has moved some
of the devices in the memory map and uses different device types in

hw/arm/armsse: Add framework for data-driven device placement

The SSE-300 is mostly the same as the SSE-200, but it has moved some
of the devices in the memory map and uses different device types in
some cases. To accommodate this, add a framework where the placement
and wiring of some devices can be specified in a data table.

This commit adds the framework for this data-driven device placement,
and makes the CMSDK APB timer devices use it. Subsequent commits
will convert the other devices which differ between SSE-200 and
SSE-300.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-24-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Add a define for number of IRQs used by the SSE itself

The SSE uses 32 interrupts for its own devices, and then passes through
its expansion IRQ inputs to the CPU's interrupts 33 and

hw/arm/armsse: Add a define for number of IRQs used by the SSE itself

The SSE uses 32 interrupts for its own devices, and then passes through
its expansion IRQ inputs to the CPU's interrupts 33 and upward.
Add a define for the number of IRQs the SSE uses for itself, instead
of hardcoding 32.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-23-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Use an array for apb_ppc fields in the state structure

Convert the apb_ppc0 and apb_ppc1 fields in the ARMSSE state struct
to use an array instead of two separate fields. We already

hw/arm/armsse: Use an array for apb_ppc fields in the state structure

Convert the apb_ppc0 and apb_ppc1 fields in the ARMSSE state struct
to use an array instead of two separate fields. We already had one
place in the code that wanted to be able to refer to the PPC by
index, and we're about to add more code like that.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-22-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524

# gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/mps2: Update old infocenter.arm.com URLs

Update old infocenter.arm.com URLs to the equivalent developer.arm.com
ones (the old URLs should redirect, but we might as well avoid the
redirection

hw/arm/mps2: Update old infocenter.arm.com URLs

Update old infocenter.arm.com URLs to the equivalent developer.arm.com
ones (the old URLs should redirect, but we might as well avoid the
redirection notice, and the new URLs are pleasantly shorter).

This commit covers the links to the MPS2 board TRM, the various
Application Notes, the IoTKit and SSE-200 documents.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-25-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210129-1' into staging

target-arm queue:
* Implement ID_PFR2
* Conditionalize DBGDIDR
* rename xlnx-zcu102.canbusN properties

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210129-1' into staging

target-arm queue:
* Implement ID_PFR2
* Conditionalize DBGDIDR
* rename xlnx-zcu102.canbusN properties
* provide powerdown/reset mechanism for secure firmware on 'virt' board
* hw/misc: Fix arith overflow in NPCM7XX PWM module
* target/arm: Replace magic value by MMU_DATA_LOAD definition
* configure: fix preadv errors on Catalina macOS with new XCode
* Various configure and other cleanups in preparation for iOS support
* hvf: Add hypervisor entitlement to output binaries (needed for Big Sur)
* Implement pvpanic-pci device
* Convert the CMSDK timer devices to the Clock framework

# gpg: Signature made Fri 29 Jan 2021 16:08:02 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210129-1: (46 commits)
hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS
arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
hw/arm/armsse: Use Clock to set system_clock_scale
tests/qtest/cmsdk-apb-watchdog-test: Test clock changes
hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input
hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input
hw/timer/cmsdk-apb-timer: Convert to use Clock input
hw/arm/stellaris: Create Clock input for watchdog
hw/arm/stellaris: Convert SSYS to QOM device
hw/arm/musca: Create and connect ARMSSE Clocks
hw/arm/mps2-tz: Create and connect ARMSSE Clocks
hw/arm/mps2: Create and connect SYSCLK Clock
hw/arm/mps2: Inline CMSDK_APB_TIMER creation
hw/arm/armsse: Wire up clocks
hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"
hw/watchdog/cmsdk-apb-watchdog: Add Clock input
hw/timer/cmsdk-apb-dualtimer: Add Clock input
hw/timer/cmsdk-apb-timer: Add Clock input
hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

Now no users are setting the frq properties on the CMSDK timer,
dualtimer, watchdog or ARMSSE SoC devices, we can remove the
pr

arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

Now no users are setting the frq properties on the CMSDK timer,
dualtimer, watchdog or ARMSSE SoC devices, we can remove the
properties and the struct fields that back them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-25-peter.maydell@linaro.org
Message-id: 20210121190622.22000-25-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Wire up clocks

Create two input clocks on the ARMSSE devices, one for the normal
MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the
appropriate devices. The old propert

hw/arm/armsse: Wire up clocks

Create two input clocks on the ARMSSE devices, one for the normal
MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the
appropriate devices. The old property-based clock frequency setting
will remain in place until conversion is complete.

This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-12-peter.maydell@linaro.org
Message-id: 20210121190622.22000-12-peter.maydell@linaro.org

show more ...

hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"

While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provid

hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"

While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provide both at once. We want the final name of the main
input Clock to be "MAINCLK", following the hardware name.
Unfortunately creating an input Clock with a name X creates an
under-the-hood QOM property X; for "MAINCLK" this clashes with the
existing UINT32 property of that name.

Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the
MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be
deleted.

Commit created with:
perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-11-peter.maydell@linaro.org
Message-id: 20210121190622.22000-11-peter.maydell@linaro.org

show more ...

hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer

The state struct for the CMSDK APB timer device doesn't follow our
usual naming convention of camelcase -- "CMSDK" and "APB" ar

hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer

The state struct for the CMSDK APB timer device doesn't follow our
usual naming convention of camelcase -- "CMSDK" and "APB" are both
acronyms, but "TIMER" is not so should not be all-uppercase.
Globally rename the struct to "CMSDKAPBTimer" (bringing it into line
with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains
as-is because "UART" is an acronym).

Commit created with:
perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-7-peter.maydell@linaro.org
Message-id: 20210121190622.22000-7-peter.maydell@linaro.org

show more ...