hw/usb/hcd-xhci-pci: Use modulo to select MSI vector as per spec

QEMU would crash with a failed assertion if the XHCI controller
attempted to raise the interrupt on an interrupter corresponding
to a

hw/usb/hcd-xhci-pci: Use modulo to select MSI vector as per spec

QEMU would crash with a failed assertion if the XHCI controller
attempted to raise the interrupt on an interrupter corresponding
to a MSI vector with a higher index than the highest configured
for the device by the guest driver.

This behaviour is correct on the MSI/PCI side: per PCI 3.0 spec,
devices must ensure they do not send MSI notifications for
vectors beyond the range of those allocated by the system/driver
software. Unlike MSI-X, there is no generic way for handling
aliasing in the case of fewer allocated vectors than requested,
so the specifics are up to device implementors. (Section
6.8.3.4. "Sending Messages")

It turns out the XHCI spec (Implementation Note in section 4.17,
"Interrupters") requires that the host controller signal the MSI
vector with the number computed by taking the interrupter number
modulo the number of enabled MSI vectors.

This change introduces that modulo calculation, fixing the
failed assertion. This makes the device work correctly in MSI mode
with macOS's XHCI driver, which only allocates a single vector.

Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250112210056.16658-2-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit bb5b7fced6b5d3334ab20702fc846e47bb1fb731)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove now-unused device_class_set_parent_reset()
* reset: introduce device_class_set_legacy_reset()
* reset: remove unneeded transitional machinery
* kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
* hvf: arm: Implement and use hvf_get_physical_address_range
so VMs can have larger-than-36-bit IPA spaces when the host
supports this
* target/arm/tcg: refine cache descriptions with a wrapper
* hw/net/can/xlnx-versal-canfd: fix various bugs
* MAINTAINERS: update versal, CAN maintainer entries
* hw/intc/arm_gic: fix spurious level triggered interrupts

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmbkVokZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pR5D/0ZJzJi7C0HIa4KYuBkcpZQ
# M3iUa1uiZoCniXlWuKFt2rUBrmhbW30YHw5gQjnxoUO4VVqREkFi3e5nzUKRQmvP
# FRm8dnuC36qwQJFhm+rQqUb8/AyqrVFnIaHhn7dBKLwRFm9+kbZ0v9x1Eq1DZk3S
# mijBQRiOjrj+FRkmyNJLhylGpm+p9VRdnBjmUtN2Yw+2fPkHmUURRSUvhwCK4BB5
# AvKgMC0EIIsLJKLfrWzk/EsYC8ogrGitISzFt8iWLAqxuxtuhv1StstleD4mZMK8
# gH+ZH5tsls2IiTIKkHfcbUcA55efDrQHGDat7n1Q0EWqOjET0soES+GpS0Jj6IXK
# uOnsDZ7MLFU/SbpckicLQ/JwNi3HiIfQgBVB2aJZ+cg8CGqaQCI5ZvWs7XFpUgkb
# naA4IR5mdNgXJm7ttBKbWarPNcmdODqa/5YDjXdyHmMx3JD994k1y5LIi3o69TgI
# rgHzU8ChZqaBDEvNa5KGtadQPnaSBP15Yqbp5rn2knVRKjDdyCdB94aWO5tZkmaO
# ARFmNk6h5bhwXdXl2Hu67RS2Kd0/fHMFWsxyHAX4NYT+Vq+ZTjLdaPzwFdfA0yAz
# wXWn0EAeYQ5M2xOPfDM/JYSc1THSzhpwy/CBrRjrCRZMDE+bx9BRC7pUXwquE8xF
# CW1NUxkvZikQeiMzgEBbTA==
# =u6u8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Sep 2024 16:13:13 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm: (27 commits)
hw/intc/arm_gic: fix spurious level triggered interrupts
MAINTAINERS: Add my-self as CAN maintainer
MAINTAINERS: Update Xilinx Versal OSPI maintainer's email address
MAINTAINERS: Remove Vikram Garhwal as maintainer
hw/net/can/xlnx-versal-canfd: Fix FIFO issues
hw/net/can/xlnx-versal-canfd: Simplify DLC conversions
hw/net/can/xlnx-versal-canfd: Fix byte ordering
hw/net/can/xlnx-versal-canfd: Handle flags correctly
hw/net/can/xlnx-versal-canfd: Translate CAN ID registers
hw/net/can/xlnx-versal-canfd: Fix CAN FD flag check
hw/net/can/xlnx-versal-canfd: Fix interrupt level
target/arm/tcg: refine cache descriptions with a wrapper
hvf: arm: Implement and use hvf_get_physical_address_range
hvf: Split up hv_vm_create logic per arch
hw/boards: Add hvf_get_physical_address_range to MachineClass
kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
hw/core/resettable: Remove transitional_function machinery
hw/core/qdev: Simplify legacy_reset handling
hw: Remove device_phases_reset()
hw: Rename DeviceClass::reset field to legacy_reset
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org

show more ...

Merge tag 'misc-20240619' of https://github.com/philmd/qemu into staging

Misc patches queue

. Remove deprecated pc-i440fx-2.0 -> 2.3 machines (Phil)
. Always use little endian audio format in virti

Merge tag 'misc-20240619' of https://github.com/philmd/qemu into staging

Misc patches queue

. Remove deprecated pc-i440fx-2.0 -> 2.3 machines (Phil)
. Always use little endian audio format in virtio-snd (Phil)
. Avoid using Monitor in INTERRUPT_STATS_PROVIDER::print_info (Phil)
. Introduce x-query-interrupt-controllers QMP command (Phil)
. Introduce pnv_chip_foreach_cpu() to remove one CPU_FOREACH use (Cédric)
. Constify few uses of IOMMUTLBEvent (Phil)
. Wire loongson_ipi device to loongson3_virt/TCG (Jiaxun)
. Fix inclusion of tracing headers on s390x/TCG (Phil)
. Add few shortcuts missing to readline (Manos)
. Update ui/display entries in MAINTAINERS (Gerd)
. Use qemu_add_mouse_change_notifier on Cocoa (Akihiko)
. Fix Standard VGA screen blanking and cleanups (Gerd)
. Fix USB/MTP reported "free space" value (Fabio)
. Cast size_memop() returned value (Roman)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZyuKYACgkQ4+MsLN6t
# wN5guxAAvwJWbxQA8B4+gfiYaMK0AnM4leuCZ+8Sf+LhK32k2UkFA4NnKBkxGmO+
# 45NOEEEEv1Tukvtq1STHkYEdERJbHndpSFk2XmaYY09Ofo54vv2dXy6MD6GJriuA
# Pr9Mivzs490RSPXmxhsa8GU5IE6CO3LamgpSeH8XxPTvCbRIiB8LcKsme6utBAZv
# 9dHnEX5sXEEY2ZvArQd+eueyJfRyN4+1PpQkE9uH/wLIBqHAkHgSvFVaLo+PtA7T
# xfcFvrawRTWIU+P1lojmCMb+mOj+YS7yigpkkYQC4SFm0PEv5J5nyhr/mhhiVuSS
# tK8DNNi44F7/Z2CzEwbwk1PEnfKWtCgG2rEiR5uT6E8nmvxaOr2LfswBjLSwVDPS
# mBOnjTMLqTBPKq8E8x2di1h2cJ9PZ90zZtWzYD8Eqoq+eqz/x+8z/qP4vifzO+NB
# 7lj4IQZzLn+iktDGpjfh2RNoV9F9i9BwFGJqO2i0MzVftezJuGfe9olVOP2ErpnR
# jqB7gzgc6g4tYiOK9WchuIeB/S9dU/5qqQxWwINWX0j4cHF6Qq71LyejCTfpqpf8
# jjF65XdGHcyVm9NAnr18MTzwdu3YYWf4w2OGIHg7iGLC0hv3U+EzEEMpv2E6pelM
# iXgtqkRQm9qJaSrjfv0MUp9irjq01aIaHceFmP20QtkMP256E6c=
# =Ed8Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jun 2024 03:53:26 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'misc-20240619' of https://github.com/philmd/qemu: (74 commits)
exec: Make the MemOp enum cast explicit
ui+display: rename is_buffer_shared() -> surface_is_allocated()
ui+display: rename is_placeholder() -> surface_is_placeholder()
stdvga: fix screen blanking
ui/cocoa: Use qemu_add_mouse_change_notifier
MAINTAINERS: drop spice+ui maintainership
MAINTAINERS: drop virtio-gpu maintainership
util/readline: Add C-u shortcut
util/readline: Add C-n, C-p shortcuts
util/readline: Fix lints for readline_handle_byte
target/s390x: Use s390_skeys_get|set() helper
hw/s390x: Introduce s390_skeys_get|set() helpers
hw/mips/loongson3_virt: Wire up loongson_ipi device
hw/intc/loongson_ipi: Replace ipi_getcpu with cpu_by_arch_id
hw/intc/loongson_ipi: Provide per core MMIO address spaces
hw/intc: Remove loongarch_ipi.c
hw/usb/dev-mtp: Correctly report free space
hw/usb: Remove unused 'host.h' header
hw/i386/iommu: Constify IOMMUTLBEvent in vtd_page_walk_hook prototype
memory: Constify IOMMUTLBEvent in memory_region_notify_iommu()
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/usb/hcd-xhci: Remove XHCI_FLAG_SS_FIRST flag

XHCI_FLAG_SS_FIRST was only used by the pc-i440fx-2.0 machine,
which got removed. Remove it and simplify various functions in
hcd-xhci.c.

Reviewed-by

hw/usb/hcd-xhci: Remove XHCI_FLAG_SS_FIRST flag

XHCI_FLAG_SS_FIRST was only used by the pc-i440fx-2.0 machine,
which got removed. Remove it and simplify various functions in
hcd-xhci.c.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-5-philmd@linaro.org>

show more ...

hw/usb/hcd-xhci: Remove XHCI_FLAG_FORCE_PCIE_ENDCAP flag

XHCI_FLAG_FORCE_PCIE_ENDCAP was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it
and simplify usb_xhci_pci_realize().

Re

hw/usb/hcd-xhci: Remove XHCI_FLAG_FORCE_PCIE_ENDCAP flag

XHCI_FLAG_FORCE_PCIE_ENDCAP was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it
and simplify usb_xhci_pci_realize().

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-4-philmd@linaro.org>

show more ...

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXA

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWPOFsdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8cCQgAnQjy3Ic1i225AElh
# 0Ph3Aiw6WT9pECLoKmyroxHbTGuaEJoIXeaOhMAnowCTBLoKRR3/Ooq0DGOW+l/Z
# f5PwWSkjkb+OcS+dj/kgQBu58/Gk5G8ogksqKQvci8k2okhjHmITSQDu0dtwzDZr
# jVGh3gmGoat73jQyD/nAwgWFawlLkklOMR/yvnFX7EJIBepRVbkMPayoKlB+6W07
# 1kqhSwoI0vQCjhJ3Q7Q0GC4rrHK3KUq7o/25yvICf4EgPKfsaym1wAjDhdKToixl
# 9T+ALZG8SiZZkBlb6l3QZ7pqtqavxYtPdZ2Gx/nMu0RRu4G33d5AVGHRrXj9qttW
# 5mL7ZQ==
# =uQ4C
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 29 Dec 2023 21:21:31 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-20231230' of https://gitlab.com/rth7680/qemu: (71 commits)
docs: Constify VMstate in examples
tests/unit/test-vmstate: Constify VMState
util/fifo8: Constify VMState
replay: Constify VMState
system: Constify VMState
migration: Constify VMState
cpu-target: Constify VMState
backends: Constify VMState
audio: Constify VMState
hw/misc/macio: Constify VMState
hw/watchdog: Constify VMState
hw/virtio: Constify VMState
hw/vfio: Constify VMState
hw/usb: Constify VMState
hw/tpm: Constify VMState
hw/timer: Constify VMState
hw/ssi: Constify VMState
hw/sparc: Constify VMState
hw/sensor: Constify VMState
hw/sd: Constify VMState
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb: Constify VMState

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-59-richard.henderson@linaro.org>

Merge tag 'fixes-20221123-pull-request' of https://gitlab.com/kraxel/qemu into staging

ui+usb+audio: bugfixes for 7.2

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTg

Merge tag 'fixes-20221123-pull-request' of https://gitlab.com/kraxel/qemu into staging

ui+usb+audio: bugfixes for 7.2

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmN+MaYACgkQTLbY7tPo
# cTiJ7A//dN/US7zHSHcgAscyjSClZRU4gHyJcnN0BoNtrOXW9lIGEnMzQBfOn2nb
# 5vaL2u2+Ooz/92pEi6P2qKUxHo63P7RfXXEOhPdi+kENK3UYOzlyJmlUUUrXyu78
# W8BM/styxb1s84KmPauRFGmgCoXCZZ4IklZUaVLqLYwJUv6/BGlbxorEdeuCGev0
# LgeyZTWaWcI5jOdIaL+Hl9PKzQCyKigT3HWA8lPvs31+hvdK5RvL5mai6SD+4Mtj
# JaLGqZ3N7oSo7a/LT+f0jebwg/QUV9EGkJmnF6tlGg3IM34/Mqbl+BMJjGAh3xqx
# z3qks/z2baHtz59CHGVS8sxWPC+5Wh3hgkpzOJ83fCUqueS7cMXBF6fcf0y0MJqP
# ne6ePE/4ZWcHnoycpZqNRDqao+Lh62PSdteAjf2yq8ZLhhm9HgP4bl/4je8tbi/I
# Z6WrP4yv8l7ea5jZUbtURbe0pYKAmzMr2rwv34jJbXAn+BU5vV1/5j7jyz2UlETK
# G7fiLJEUutFhYaCWhgNCE8HTgYt9V0PEjGfIJXkKHRHLd/229VSjlvdQyP/vtSLt
# EzaP1JdtGZ++QEzMBY8lzrozNHaJglGBjonG9fUnJ4VSB4+J8b3KqBEXlmWL16Fx
# UvV8MtOuQ6Y377ErbQJYjui6BOArV6iI5NBlbvWuc+CgA09orYs=
# =m/Hx
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 23 Nov 2022 09:43:50 EST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* tag 'fixes-20221123-pull-request' of https://gitlab.com/kraxel/qemu:
hw/audio/intel-hda: Drop unnecessary prototype
hw/audio/intel-hda: don't reset codecs twice
hw/usb/hcd-xhci: Reset the XHCIState with device_cold_reset()
ui/gtk: prevent ui lock up when dpy_gl_update called again before current draw event occurs
hw/usb/hcd-xhci.c: spelling: tranfer
gtk: disable GTK Clipboard with a new meson option
Revert "usbredir: avoid queuing hello packet on snapshot restore"

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/usb/hcd-xhci: Reset the XHCIState with device_cold_reset()

Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclas

hw/usb/hcd-xhci: Reset the XHCIState with device_cold_reset()

Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclass of TYPE_DEVICE. Since TYPE_DEVICE devices are not on any
qbus and do not get automatically reset, the wrapper devices both
reset the TYPE_XHCI device in their own reset functions. However,
they do this using device_legacy_reset(), which will reset the device
itself but not any bus it has.

Switch to device_cold_reset(), which avoids using a deprecated
function and also propagates reset along any child buses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221014145423.2102706-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210528-pull-request' into staging

usb: bugfixes for hid and xhci.

# gpg: Signature made Fri 28 May 2021 15:21:51 BST
# gpg: us

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210528-pull-request' into staging

usb: bugfixes for hid and xhci.

# gpg: Signature made Fri 28 May 2021 15:21:51 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210528-pull-request:
hw/usb: hcd-xhci-pci: Fix spec violation of IP flag for MSI/MSI-X
hw/usb: hcd-xhci-pci: Raise MSI/MSI-X interrupts only when told to
hw/input/hid: Add support for keys of jp106 keyboard.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb: hcd-xhci-pci: Fix spec violation of IP flag for MSI/MSI-X

Per xHCI spec v1.2 chapter 4.17.5 page 296:

If MSI or MSI-X interrupts are enabled, Interrupt Pending (IP)
shall be cleared aut

hw/usb: hcd-xhci-pci: Fix spec violation of IP flag for MSI/MSI-X

Per xHCI spec v1.2 chapter 4.17.5 page 296:

If MSI or MSI-X interrupts are enabled, Interrupt Pending (IP)
shall be cleared automatically when the PCI dword write generated
by the interrupt assertion is complete.

Currently QEMU does not clear the IP flag in the MSI / MSI-X mode.
This causes subsequent spurious interrupt to be delivered to guests.
To solve this, we change the xhci intr_raise() hook routine to have
a bool return value that is passed to its caller (the xhci core),
with true indicating that IP should be self-cleared.

Fixes: 62c6ae04cf43 ("xhci: Initial xHCI implementation")
Fixes: 4c47f800631a ("xhci: add msix support")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
[bmeng: move IP clear codes from xhci pci to xhci core]
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-2-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

hw/usb: hcd-xhci-pci: Raise MSI/MSI-X interrupts only when told to

At present MSI / MSI-X interrupts are triggered regardless of the
irq level. We should have checked the level to determine whether

hw/usb: hcd-xhci-pci: Raise MSI/MSI-X interrupts only when told to

At present MSI / MSI-X interrupts are triggered regardless of the
irq level. We should have checked the level to determine whether
the interrupt needs to be delivered.

The level check logic was present in early versions of the xhci
model, but got dropped later by a rework of interrupt handling
under commit 4c4abe7cc903 ("xhci: rework interrupt handling").

Fixes: 4c4abe7cc903 ("xhci: rework interrupt handling")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-1-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210122-pull-request' into staging

usb: cleanups and fixes.
usb: add pcap support.

# gpg: Signature made Fri 22 Jan 2021 17:48:35 GMT
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210122-pull-request' into staging

usb: cleanups and fixes.
usb: add pcap support.

# gpg: Signature made Fri 22 Jan 2021 17:48:35 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210122-pull-request:
usb-host: map LIBUSB_SPEED_SUPER_PLUS to USB_SPEED_SUPER
usb: add pcap support.
hw/usb/dev-uas: Report command additional adb length as unsupported
scsi/utils: Add INVALID_PARAM_VALUE sense code definition
hw/usb/hcd-xhci: Fix extraneous format-truncation error on 32-bit hosts
hw/usb: Convert to qdev_realize()
hw/usb: Fix bad printf format specifiers
hw/usb/host-libusb.c: fix build with kernel < 5.0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb: Convert to qdev_realize()

Device code shouldn't mess with QOM property "realized" since we have
proper interfaces (merge commit 6675a653). Commit 8ddab8dd3d
"usb/hcd-xhci: Split pci wrapper

hw/usb: Convert to qdev_realize()

Device code shouldn't mess with QOM property "realized" since we have
proper interfaces (merge commit 6675a653). Commit 8ddab8dd3d
"usb/hcd-xhci: Split pci wrapper for xhci base model" and commit
f00ff136ee "usb: hcd-xhci-sysbus: Attach xhci to sysbus device"
reintroduced two instances. Clean them up. Note that s->xhci is
a (bus-less) TYPE_XHCI device.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210119120151.53757-1-armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-15' into staging

Fix Lesser GPL license versions (should be "2.1" and not "2")

# gpg: Signature made Sun 15 Nov 2020 16:2

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-15' into staging

Fix Lesser GPL license versions (should be "2.1" and not "2")

# gpg: Signature made Sun 15 Nov 2020 16:20:10 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-11-15: (26 commits)
nomaintainer: Fix Lesser GPL version number
test: Fix LGPL information in the file headers
tests/acceptance: Fix LGPL information in the file headers
tests/migration: Fix LGPL information in the file headers
sparc tcg cpus: Fix Lesser GPL version number
e1000e: Fix Lesser GPL version number
x86 hvf cpus: Fix Lesser GPL version number
nvdimm: Fix Lesser GPL version number
w32: Fix Lesser GPL version number
tpm: Fix Lesser GPL version number
overall/alpha tcg cpus|hppa: Fix Lesser GPL version number
overall usermode...: Fix Lesser GPL version number
migration: Fix Lesser GPL version number
parallel nor flash: Fix Lesser GPL version number
arm tcg cpus: Fix Lesser GPL version number
x86 tcg cpus: Fix Lesser GPL version number
linux user: Fix Lesser GPL version number
usb: Fix Lesser GPL version number
tricore tcg cpus: Fix Lesser GPL version number
xtensa tcg cpus: Fix Lesser GPL version number
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of

usb: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122332.19369-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20201021-pull-request' into staging

microvm: fix PCIe IRQs in APIC table.
microvm: add usb support.

# gpg: Signature made Wed 21 Oct 2020 1

Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20201021-pull-request' into staging

microvm: fix PCIe IRQs in APIC table.
microvm: add usb support.

# gpg: Signature made Wed 21 Oct 2020 15:48:00 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/microvm-20201021-pull-request:
tests/acpi: update expected data files
tests/acpi: add microvm rtc test
tests/acpi: add microvm usb test
tests/acpi: add empty tests/data/acpi/microvm/DSDT.{usb, rtc} files
tests/acpi: allow updates for expected data files
microvm: add usb support
usb/xhci: fixup xhci kconfig deps
usb/xhci: add xhci_sysbus_build_aml() helper
usb/xhci: add include/hw/usb/xhci.h header file
acpi: add aml builder stubs
tests/acpi: disallow changes for microvm/APIC.pcie
tests/acpi: update expected data files
apci: drop has_pci arg for acpi_build_madt
microvm: set pci_irq_mask
x86: make pci irqs runtime configurable
tests/acpi: add empty microvm/APIC.pcie
tests/acpi: allow changes for microvm/APIC.pcie

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb/xhci: add include/hw/usb/xhci.h header file

Move a bunch of defines which might be needed outside core xhci
code to that place. Add XHCI_ prefixes to avoid name clashes.
No functional change.

usb/xhci: add include/hw/usb/xhci.h header file

Move a bunch of defines which might be needed outside core xhci
code to that place. Add XHCI_ prefixes to avoid name clashes.
No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-3-kraxel@redhat.com

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200928-pull-request' into staging

usb: xhci sysbus support.
usb: use lock guards.

# gpg: Signature made Mon 28 Sep 2020 14:16:22 BST
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200928-pull-request' into staging

usb: xhci sysbus support.
usb: use lock guards.

# gpg: Signature made Mon 28 Sep 2020 14:16:22 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200928-pull-request:
hw/usb: Use lock guard macros
usb: hcd-xhci-sysbus: Attach xhci to sysbus device
usb/hcd-xhci: Split pci wrapper for xhci base model
usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c
usb/hcd-xhci: Make dma read/writes hooks pci free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb/hcd-xhci: Split pci wrapper for xhci base model

This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/m

usb/hcd-xhci: Split pci wrapper for xhci base model

This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/msix interrupts handling is moved under XHCIPCIState. Made required
changes for qemu-xhci-nec.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c

Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.

Signed-off-by:

usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c

Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...