usb-storage: Fix BlockConf defaults

Commit 30896374 started to pass the full BlockConf from usb-storage to
scsi-disk, while previously only a few select properties would be
forwarded. This enables t

usb-storage: Fix BlockConf defaults

Commit 30896374 started to pass the full BlockConf from usb-storage to
scsi-disk, while previously only a few select properties would be
forwarded. This enables the user to set more properties, e.g. the block
size, that are actually taking effect.

However, now the calls to blkconf_apply_backend_options() and
blkconf_blocksizes() in usb_msd_storage_realize() that modify some of
these properties take effect, too, instead of being silently ignored.
This means at least that the block sizes get an unconditional default of
512 bytes before the configuration is passed to scsi-disk.

Before commit 30896374, the property wouldn't be set for scsi-disk and
therefore the device dependent defaults would apply - 512 for scsi-hd,
but 2048 for scsi-cd. The latter default has now become 512, too, which
makes at least Windows 11 installation fail when installing from
usb-storage.

Fix this by simply not calling these functions any more in usb-storage
and passing BlockConf on unmodified (except for the BlockBackend). The
same functions are called by the SCSI code anyway and it sets the right
defaults for the actual media type.

Fixes: 308963746169 ('scsi: Don't ignore most usb-storage properties')
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2260
Reported-by: Jonas Svensson
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20240412144202.13786-1-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- Allow concurrent BB context changes
- virtio: Re-enable notifications after drain
- virtio-blk: Fix miss

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- Allow concurrent BB context changes
- virtio: Re-enable notifications after drain
- virtio-blk: Fix missing use of irqfd
- scsi: Don't ignore most usb-storage properties
- blkio: Respect memory-alignment for bounce buffer allocations
- iotests tmpdir fixes
- virtio-blk: Code cleanups

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmXEkwgRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y3jA//TmSBVqHljauyImYOgCt8qCXACttV0xhQ
# Q5ldUNx/JmIFMoUR7OlpVAL2MtvdwE0jjY+sDlEmWtz4IFJcCsCTUCHZZb8blreb
# +mnMkqrQ6Nb3tPR2jeIknrXqNy1ffyjZItktjWXVcl6jaHB8YabHHqszs9DIaf4n
# lcKovBKxula8ckMgvm48wCwTtS7VEPeuC5FrOqUqTtuhg+QKp5ZVoyVFHtf6GKTD
# iuXzCd4yxu4fDKAthJJj4N1bQaOmCKU7K9N/665wj9P2TyfmwlBAfNwNAlYbdX1E
# Sv7eSioQs2+oUxmfD/PUsF7wTYtDCrSAUFn1kP/XdRyXPJR3dHGiBKV9w9CaWNrU
# y8rqOhxVcuoBLRljTF32BK4HniAREjRngtpT2FnQQIyedZrXIwyTAWjs+LW12T6O
# NMiU603Nl9ZYhO1et2+qspsVpNIfEpQWpK+OCon6E+ggj1ea+pfqU30VPx4JU05I
# VLiydluIbehSkRlTHgFcTgApmx843OGW7CvWfRyen86Cexgx3DEjJUQ4/bYqaCha
# yLIi91rToSDmtlzJrg9eYiMs5Y6vz+ORvvX5im1RlbUUb7Kx/LaA4BU/uArEbBt8
# xXm/grO4hFUGqtLgd2LIjWaHSsLoW4jKeEiExFUUfvH5DG9Zl5HmzFwu+DYxX+im
# MJLLetDJAWI=
# =8tc0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 Feb 2024 08:38:32 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
virtio-blk: avoid using ioeventfd state in irqfd conditional
virtio-blk: Use ioeventfd_attach in start_ioeventfd
virtio: Re-enable notifications after drain
virtio-scsi: Attach event vq notifier with no_poll
blkio: Respect memory-alignment for bounce buffer allocations
scsi: Don't ignore most usb-storage properties
virtio-blk: do not use C99 mixed declarations
iotests: give tempdir an identifying name
iotests: fix leak of tmpdir in dry-run mode
scsi: Await request purging
block-backend: Allow concurrent context changes
monitor: use aio_co_reschedule_self()
virtio-blk: declare VirtIOBlock::rq with a type
virtio-blk: add vq_rq[] bounds check in virtio_blk_dma_restart_cb()
virtio-blk: clarify that there is at least 1 virtqueue
virtio-blk: enforce iothread-vq-mapping validation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

scsi: Don't ignore most usb-storage properties

usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the us

scsi: Don't ignore most usb-storage properties

usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.

This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.

Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge tag 'pull-include-2023-02-06-v2' of https://repo.or.cz/qemu/armbru into staging

Header cleanup patches for 2023-02-06

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0A

Merge tag 'pull-include-2023-02-06-v2' of https://repo.or.cz/qemu/armbru into staging

Header cleanup patches for 2023-02-06

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPjQRUSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTWHwQAI5D2HTRt3peFSPg/tFuYqSGtOobzM5x
# xdZxjWCtGV+dZ4TsyQ7yJkQ2i6aPjs0LzmTnTIsmf+p1OJSthvp4fQUzfXQauiJy
# OnNA76v7WjiXB8u8tcXtEkkHNmccp8n4KMjk33TfK/HQVx7lZ2EFurlCkvBr5wki
# FuDVad6R43ChmvBWdCUOi6G1IklAihm8AN4lBJu3iC7U8bjW4FmLLMitcu5OyKgt
# v9V4XFAe4eYUIPZ6uH5Lpr5m/qtrRXLe9KOdRUR2vDVL18Cf6Zl7mrUNtv7iV5TI
# hBOA12ZP5XXf81FXl7e8y3Xi2KXvb/el0wQ7SvtE7XB3Pdbfa5WSGKOc3VxYLmBA
# 4xUnEbzAogrrruovdk1bmh2LnVzCH66m72xaLCHBvjOU3M6V2B0eeaZ35FxNuFcB
# toHPAjeuzWkDAscVYcYKuPwnkNOMNqHxEdihrgy6mYLr6nauIYr7Lqgs3SqGqpct
# /HGy683+J+AqnHFTk1MTRftDxqk/Nku6ntAxLXndkpm3uDvu+iV5d3BfK3A9t7d1
# A2Y983DU6SiVwpMIv2eDL8sXYxuwIs56ZmPYIcSbqzpCXtdFqwWOTeFET/4vD+8t
# V3YKJ27jmWQ9bxbLHGPPYSKheuCVBIGsqxouE/Pbj5nXRKm/TeGp+20a4dWdE08r
# 2WTLAQbVQGD4
# =5TPW
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Feb 2023 06:28:37 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* tag 'pull-include-2023-02-06-v2' of https://repo.or.cz/qemu/armbru:
Drop duplicate #include
Don't include headers already included by qemu/osdep.h
Fix non-first inclusions of qemu/osdep.h
accel: Clean up includes
block: Clean up includes
riscv: Clean up includes
target/hexagon: Clean up includes
net: Clean up includes
migration: Clean up includes
qga: Clean up includes
hw/tricore: Clean up includes
hw/input: Clean up includes
hw/cxl: Clean up includes
crypto: Clean up includes
bsd-user: Clean up includes
scripts/clean-includes: Improve --git commit message
scripts/clean-includes: Skip symbolic links
scripts/clean-includes: Don't claim duplicate headers found when not
scripts/clean-includes: Fully skip / ignore files

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Don't include headers already included by qemu/osdep.h

This commit was created with scripts/clean-includes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qem

Don't include headers already included by qemu/osdep.h

This commit was created with scripts/clean-includes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210930' into staging

target-arm queue:
* allwinner-h3: Switch to SMC as PSCI conduit
* arm: tcg: Adhere to SMCCC 1.3 section 5

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210930' into staging

target-arm queue:
* allwinner-h3: Switch to SMC as PSCI conduit
* arm: tcg: Adhere to SMCCC 1.3 section 5.2
* xlnx-zcu102, xlnx-versal-virt: Support BBRAM and eFUSE devices
* gdbstub related code cleanups
* Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
* Use _init vs _new convention in bus creation function names
* sabrelite: Connect SPI flash CS line to GPIO3_19

# gpg: Signature made Thu 30 Sep 2021 16:11:20 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210930: (22 commits)
hw/arm: sabrelite: Connect SPI flash CS line to GPIO3_19
ide: Rename ide_bus_new() to ide_bus_init()
qbus: Rename qbus_create() to qbus_new()
qbus: Rename qbus_create_inplace() to qbus_init()
pci: Rename pci_root_bus_new_inplace() to pci_root_bus_init()
ipack: Rename ipack_bus_new_inplace() to ipack_bus_init()
scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()
target/arm: Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
target/arm: Move gdbstub related code out of helper.c
target/arm: Fix coding style issues in gdbstub code in helper.c
configs: Don't include 32-bit-only GDB XML in aarch64 linux configs
docs/system/arm: xlnx-versal-virt: BBRAM and eFUSE Usage
hw/arm: xlnx-zcu102: Add Xilinx eFUSE device
hw/arm: xlnx-zcu102: Add Xilinx BBRAM device
hw/arm: xlnx-versal-virt: Add Xilinx eFUSE device
hw/arm: xlnx-versal-virt: Add Xilinx BBRAM device
hw/nvram: Introduce Xilinx battery-backed ram
hw/nvram: Introduce Xilinx ZynqMP eFuse device
hw/nvram: Introduce Xilinx Versal eFuse device
hw/nvram: Introduce Xilinx eFuse QOM
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()

The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new

scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()

The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new bus, or
they can pass in NULL to allow the bus to be given an automatically
generated unique name. Almost all callers want to use the
autogenerated name; the only exception is the virtio-scsi device.

Taking a name argument that should almost always be NULL is an
easy-to-misuse API design -- it encourages callers to think perhaps
they should pass in some standard name like "scsi" or "scsi-bus". We
don't do this anywhere for SCSI, but we do (incorrectly) do it for
other bus types such as i2c.

The function name also implies that it will return a newly allocated
object, when it in fact does in-place allocation. We more commonly
name such functions foo_init(), with foo_new() being the
allocate-and-return variant.

Replace all the scsi_bus_new() callsites with either:
* scsi_bus_init() for the usual case where the caller wants
an autogenerated bus name
* scsi_bus_init_named() for the rare case where the caller
needs to specify the bus name

and document that for the _named() version it's then the caller's
responsibility to think about uniqueness of bus names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923121153.23754-2-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Build fixes (myself)
*

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Build fixes (myself)
* --with-devices-* support (Alex)

# gpg: Signature made Fri 09 Jul 2021 17:23:52 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (48 commits)
meson: Use input/output for entitlements target
configure: allow the selection of alternate config in the build
configs: rename default-configs to configs and reorganise
hw/arm: move CONFIG_V7M out of default-devices
hw/arm: add dependency on OR_IRQ for XLNX_VERSAL
meson: Introduce target-specific Kconfig
meson: switch function tests from compilation to linking
vl: fix leak of qdict_crumple return value
target/i386: fix exceptions for MOV to DR
target/i386: Added DR6 and DR7 consistency checks
target/i386: Added MSRPM and IOPM size check
monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically
usb: build usb-host as module
monitor/usb: register 'info usbhost' dynamically
usb: drop usb_host_dev_is_scsi_storage hook
monitor: allow register hmp commands
accel: build tcg modular
accel: add tcg module annotations
accel: build qtest modular
accel: add qtest module annotations
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,
for consiste

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,
for consistency. Add an inline helper function to check the flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-32-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210315-pull-request' into staging

usb: -usbdevice cleanup and un-deprecation.
usb: split usb-storage.
usb: misc fixes and cleanups.

# gpg: Si

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210315-pull-request' into staging

usb: -usbdevice cleanup and un-deprecation.
usb: split usb-storage.
usb: misc fixes and cleanups.

# gpg: Signature made Mon 15 Mar 2021 18:02:28 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210315-pull-request:
usb/storage: clear csw on reset
usb/storage: add kconfig symbols
usb/storage move usb-storage device to separate source file
usb/storage: move usb-bot device to separate source file
usb/storage: move declarations to usb/msd.h header
hw/usb: Extract VT82C686 UHCI PCI function into a new unit
hw/usb/hcd-uhci: Expose generic prototypes to local header
hw/southbridge: Add missing Kconfig dependency VT82C686 on USB_UHCI
usb: Document the missing -usbdevice options
usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed)
usb: remove '-usbdevice u2f-key'
usb: remove support for -usbdevice parameters
hw/usb/bus: Remove the "full-path" property

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb/storage move usb-storage device to separate source file

Pure code motion, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-4-kraxel@redh

usb/storage move usb-storage device to separate source file

Pure code motion, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-4-kraxel@redhat.com>

show more ...