hw/aspeed: Correct minimum access size for all models

Guest code was performing a byte load to the SCU MMIO region, leading to
the guest code crashing (it should be using proper accessors, but
that

hw/aspeed: Correct minimum access size for all models

Guest code was performing a byte load to the SCU MMIO region, leading to
the guest code crashing (it should be using proper accessors, but
that is not Qemu's bug). Hardware and the documentation[1] both agree that
byte loads are okay, so change all of the aspeed devices to accept a
minimum access size of 1.

[1] See the 'ARM Address Space Mapping' table in the ASPEED docs. This
is section 6.1 in the ast2400 and ast2700, and 7.1 in the ast2500 and
ast2600 datasheets.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2636
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Troy Lee <leetroy@gmail.com>

show more ...

hw/aspeed: Correct minimum access size for all models

Guest code was performing a byte load to the SCU MMIO region, leading to
the guest code crashing (it should be using proper accessors, but
that

hw/aspeed: Correct minimum access size for all models

Guest code was performing a byte load to the SCU MMIO region, leading to
the guest code crashing (it should be using proper accessors, but
that is not Qemu's bug). Hardware and the documentation[1] both agree that
byte loads are okay, so change all of the aspeed devices to accept a
minimum access size of 1.

[1] See the 'ARM Address Space Mapping' table in the ASPEED docs. This
is section 6.1 in the ast2400 and ast2700, and 7.1 in the ast2500 and
ast2600 datasheets.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2636
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Troy Lee <leetroy@gmail.com>

show more ...

hw/aspeed: Correct minimum access size for all models

Guest code was performing a byte load to the SCU MMIO region, leading to
the guest code crashing (it should be using proper accessors, but
that

hw/aspeed: Correct minimum access size for all models

Guest code was performing a byte load to the SCU MMIO region, leading to
the guest code crashing (it should be using proper accessors, but
that is not Qemu's bug). Hardware and the documentation[1] both agree that
byte loads are okay, so change all of the aspeed devices to accept a
minimum access size of 1.

[1] See the 'ARM Address Space Mapping' table in the ASPEED docs. This
is section 6.1 in the ast2400 and ast2700, and 7.1 in the ast2500 and
ast2600 datasheets.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2636
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Troy Lee <leetroy@gmail.com>

show more ...

Merge tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu into staging

aspeed queue:

* Fixed eMMC size calculation
* Fixed IRQ definitions on AST2700
* Added RTC support to AST2700
* Fix

Merge tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu into staging

aspeed queue:

* Fixed eMMC size calculation
* Fixed IRQ definitions on AST2700
* Added RTC support to AST2700
* Fixed timer IRQ status on AST2600
* Improved SDHCI model with new registers
* Added -nodefaults support to AST1030
* Provided a way to use an eMMC device without boot partitions

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcoo4oACgkQUaNDx8/7
# 7KGYAQ/9GWiwM7SHFD/WTEo6iClQCk+Do3pzGXZPQq7WLqYhBU8mYwSaqMDUtXj+
# MQVywyLxSYaKdCKessN0haATyzEDVRtxKwIRnbrSDWWnxG8NGj2esOTsU6/wgfD4
# FqARaMH91FQB6rY8QbmbGmqTJ1QbWEPXj7v2piJol5dvI2Oe8iqn/6z1Cv4NMXwh
# aYHwSVwcHLD9tfmyXP0DKN/XHLC4pTAOoU96ajcN6RRW+D6vuQEsQq0caZt8CHQc
# I2oSptU+RZF2DPbSeEB42y9I138/kQzTIaVnbBN//NLRwbzRsLlXhA92F2CJyDrD
# FGNQyynteil8F7M5Oab47fFia1QF/v4G45VOAsHpT1tLBsZPKJdRwfLLqDPZbVbG
# 2lAVuukqW0gKoEHsXfVsDzcIxpX81SlUsccHY4kCxsRNnwSzCWaDK9OOTx3CAxjG
# CzzDgQszNr/12dzkWExIhLpMhQNeiUXX1veAH/jzbjyRAKxzjkDYaX2lUC3MfmqX
# irjmzOU0AbtComv4ybeBqtqNmQvUx5/y993Hgakc9mqqCoAm/Fn4qtx6uW5vSSZJ
# w4heyWbzcLp5RIzSYZypWlmgI+3bJgJq2aX276MYqAe3m8PnUCkuW9NTsfb+ARMl
# XGExHPNrAsw7eiiQsTa7Byt/jkEf3KmEp8ye+3cAvJwPgxlDyys=
# =ms8H
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 10:35:54 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20241104' of https://github.com/legoater/qemu:
aspeed: Don't set always boot properties of the emmc device
aspeed: Support create flash devices via command line for AST1030
hw/sd/aspeed_sdhci: Introduce Capabilities Register 2 for SD slot 0 and 1
hw/timer/aspeed: Fix interrupt status does not be cleared for AST2600
hw/timer/aspeed: Fix coding style
aspeed/soc: Support RTC for AST2700
hw/arm/aspeed_ast27x0: Avoid hardcoded '256' in IRQ calculation
hw/arm/aspeed_ast27x0: Use bsa.h for PPI definitions
hw/sd/sdcard: Fix calculation of size when using eMMC boot partitions
hw/arm: enable at24c with aspeed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/timer/aspeed: Fix interrupt status does not be cleared for AST2600

According to the datasheet of AST2600 description, interrupt status set by HW
and clear to "0" by software writing "1" on the sp

hw/timer/aspeed: Fix interrupt status does not be cleared for AST2600

According to the datasheet of AST2600 description, interrupt status set by HW
and clear to "0" by software writing "1" on the specific bit.

Therefore, if firmware set the specific bit "1" in the interrupt status
register(0x34), the specific bit of "s->irq_sts" should be cleared 0.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: fadefada4d07 ("aspeed/timer: Add support for IRQ status register on the AST2600")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/timer/aspeed: Fix coding style

Fix coding style issues from checkpatch.pl

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove now-unused device_class_set_parent_reset()
* reset: introduce device_class_set_legacy_reset()
* reset: remove unneeded transitional machinery
* kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
* hvf: arm: Implement and use hvf_get_physical_address_range
so VMs can have larger-than-36-bit IPA spaces when the host
supports this
* target/arm/tcg: refine cache descriptions with a wrapper
* hw/net/can/xlnx-versal-canfd: fix various bugs
* MAINTAINERS: update versal, CAN maintainer entries
* hw/intc/arm_gic: fix spurious level triggered interrupts

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmbkVokZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pR5D/0ZJzJi7C0HIa4KYuBkcpZQ
# M3iUa1uiZoCniXlWuKFt2rUBrmhbW30YHw5gQjnxoUO4VVqREkFi3e5nzUKRQmvP
# FRm8dnuC36qwQJFhm+rQqUb8/AyqrVFnIaHhn7dBKLwRFm9+kbZ0v9x1Eq1DZk3S
# mijBQRiOjrj+FRkmyNJLhylGpm+p9VRdnBjmUtN2Yw+2fPkHmUURRSUvhwCK4BB5
# AvKgMC0EIIsLJKLfrWzk/EsYC8ogrGitISzFt8iWLAqxuxtuhv1StstleD4mZMK8
# gH+ZH5tsls2IiTIKkHfcbUcA55efDrQHGDat7n1Q0EWqOjET0soES+GpS0Jj6IXK
# uOnsDZ7MLFU/SbpckicLQ/JwNi3HiIfQgBVB2aJZ+cg8CGqaQCI5ZvWs7XFpUgkb
# naA4IR5mdNgXJm7ttBKbWarPNcmdODqa/5YDjXdyHmMx3JD994k1y5LIi3o69TgI
# rgHzU8ChZqaBDEvNa5KGtadQPnaSBP15Yqbp5rn2knVRKjDdyCdB94aWO5tZkmaO
# ARFmNk6h5bhwXdXl2Hu67RS2Kd0/fHMFWsxyHAX4NYT+Vq+ZTjLdaPzwFdfA0yAz
# wXWn0EAeYQ5M2xOPfDM/JYSc1THSzhpwy/CBrRjrCRZMDE+bx9BRC7pUXwquE8xF
# CW1NUxkvZikQeiMzgEBbTA==
# =u6u8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Sep 2024 16:13:13 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm: (27 commits)
hw/intc/arm_gic: fix spurious level triggered interrupts
MAINTAINERS: Add my-self as CAN maintainer
MAINTAINERS: Update Xilinx Versal OSPI maintainer's email address
MAINTAINERS: Remove Vikram Garhwal as maintainer
hw/net/can/xlnx-versal-canfd: Fix FIFO issues
hw/net/can/xlnx-versal-canfd: Simplify DLC conversions
hw/net/can/xlnx-versal-canfd: Fix byte ordering
hw/net/can/xlnx-versal-canfd: Handle flags correctly
hw/net/can/xlnx-versal-canfd: Translate CAN ID registers
hw/net/can/xlnx-versal-canfd: Fix CAN FD flag check
hw/net/can/xlnx-versal-canfd: Fix interrupt level
target/arm/tcg: refine cache descriptions with a wrapper
hvf: arm: Implement and use hvf_get_physical_address_range
hvf: Split up hv_vm_create logic per arch
hw/boards: Add hvf_get_physical_address_range to MachineClass
kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
hw/core/resettable: Remove transitional_function machinery
hw/core/qdev: Simplify legacy_reset handling
hw: Remove device_phases_reset()
hw: Rename DeviceClass::reset field to legacy_reset
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org

show more ...

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXA

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWPOFsdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8cCQgAnQjy3Ic1i225AElh
# 0Ph3Aiw6WT9pECLoKmyroxHbTGuaEJoIXeaOhMAnowCTBLoKRR3/Ooq0DGOW+l/Z
# f5PwWSkjkb+OcS+dj/kgQBu58/Gk5G8ogksqKQvci8k2okhjHmITSQDu0dtwzDZr
# jVGh3gmGoat73jQyD/nAwgWFawlLkklOMR/yvnFX7EJIBepRVbkMPayoKlB+6W07
# 1kqhSwoI0vQCjhJ3Q7Q0GC4rrHK3KUq7o/25yvICf4EgPKfsaym1wAjDhdKToixl
# 9T+ALZG8SiZZkBlb6l3QZ7pqtqavxYtPdZ2Gx/nMu0RRu4G33d5AVGHRrXj9qttW
# 5mL7ZQ==
# =uQ4C
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 29 Dec 2023 21:21:31 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-20231230' of https://gitlab.com/rth7680/qemu: (71 commits)
docs: Constify VMstate in examples
tests/unit/test-vmstate: Constify VMState
util/fifo8: Constify VMState
replay: Constify VMState
system: Constify VMState
migration: Constify VMState
cpu-target: Constify VMState
backends: Constify VMState
audio: Constify VMState
hw/misc/macio: Constify VMState
hw/watchdog: Constify VMState
hw/virtio: Constify VMState
hw/vfio: Constify VMState
hw/usb: Constify VMState
hw/tpm: Constify VMState
hw/timer: Constify VMState
hw/ssi: Constify VMState
hw/sparc: Constify VMState
hw/sensor: Constify VMState
hw/sd: Constify VMState
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/timer: Constify VMState

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-57-richard.henderson@linaro.org>

Merge tag 'pull-shadow-2023-09-29' of https://repo.or.cz/qemu/armbru into staging

-Wshadow=local patches patches for 2023-09-29

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fO

Merge tag 'pull-shadow-2023-09-29' of https://repo.or.cz/qemu/armbru into staging

-Wshadow=local patches patches for 2023-09-29

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmUWhnsSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTDBkP/2E8cyH+fn7yehNAZT8fjBuDBaj0x3wf
# Bs4++bMEZpgfA/11le/Mm+N9BFDtoGj4dnDwQ0yN6bcKcfmNvxh+M+lNaRO+xvXA
# qs/kJtFYkJYuEj1wgKK2XXd4YcD/S4Qap+FSuUBv8KE/oeALkB1fEpvMcwtJtQqc
# 7POQEqYNQfUe+MX/wKZ+qditbbrFRwX69dAd8+nGTbFestXd2uFA5I5kv3ebxELg
# VjTBgQdp7s82iTvoXpTtmQ6A9ba13zmelxmsAMLlAihkbffMwbtbrkQ7qIIUOW1o
# I4WPxhIXXyZbB48qARUq5G3GQuh+7dRArcpYWaFel2a6cjm2Z6NmWJeRAr0cIaWV
# P5B79k7DO551YsBZn+ubH0U+qwMLw+zq2apQ+SeH/loE0pP/c2OBOPtaVI46D0Dh
# 2kgaSuTIy9AByAHoYBxKnxy4TVwPKzk8hdzCQdiRSO7KJdMqMsV+/w1eR4oH9dsf
# CAvJXVzLicFMMABA/4O99K+1yjIOQpwmiqAjc+gV6FdhwllSH3yQDiK4RMWNAwRu
# bRQHBCk143t7cM3ts09T+5QxkWB3U0iGMJ4rpn43yjH5xwlWmpTlztvd7XlXwyTR
# 8j2Z+8qxe992HmVk34rKdkGnu0qz4AhJBgAEEk2e0oepZvjfigqodQwEMCQsse5t
# cH51HzTDuen/
# =XVKC
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 29 Sep 2023 04:10:35 EDT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* tag 'pull-shadow-2023-09-29' of https://repo.or.cz/qemu/armbru: (56 commits)
disas/m68k: clean up local variable shadowing
hw/nvme: Clean up local variable shadowing in nvme_ns_init()
softmmu/device_tree: Fixup local variables shadowing
target/riscv: vector_helper: Fixup local variables shadowing
target/riscv: cpu: Fixup local variables shadowing
hw/riscv: opentitan: Fixup local variables shadowing
qemu-nbd: changes towards enabling -Wshadow=local
seccomp: avoid shadowing of 'action' variable
crypto: remove shadowed 'ret' variable
intel_iommu: Fix shadow local variables on "size"
aspeed/timer: Clean up local variable shadowing
aspeed/i3c: Rename variable shadowing a local
aspeed: Clean up local variable shadowing
aspeed/i2c: Clean up local variable shadowing
hw/arm/smmuv3-internal.h: Don't use locals in statement macros
hw/arm/smmuv3.c: Avoid shadowing variable
hw/misc/arm_sysctl.c: Avoid shadowing local variable
hw/intc/arm_gicv3_its: Avoid shadowing variable in do_process_its_cmd()
hw/acpi: changes towards enabling -Wshadow=local
test-throttle: don't shadow 'index' variable in do_test_accounting()
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

aspeed/timer: Clean up local variable shadowing

commit 8137355e850f ("aspeed/timer: Fix behaviour running Linux")
introduced a MAX() expression to calculate the next timer deadline :

return cal

aspeed/timer: Clean up local variable shadowing

commit 8137355e850f ("aspeed/timer: Fix behaviour running Linux")
introduced a MAX() expression to calculate the next timer deadline :

return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0));

The second MAX() is not necessary since the compared values are an
unsigned and 0. Simply remove it and fix warning :

../hw/timer/aspeed_timer.c: In function ‘calculate_next’:
../include/qemu/osdep.h:396:31: warning: declaration of ‘_a’ shadows a previous local [-Wshadow=compatible-local]
396 | typeof(1 ? (a) : (b)) _a = (a), _b = (b); \
| ^~
../hw/timer/aspeed_timer.c:170:12: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
../hw/timer/aspeed_timer.c:170:16: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
/home/legoater/work/qemu/qemu-aspeed.git/include/qemu/osdep.h:396:31: note: shadowed declaration is here
396 | typeof(1 ? (a) : (b)) _a = (a), _b = (b); \
| ^~
../hw/timer/aspeed_timer.c:170:12: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~

Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230922155924.1172019-5-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge tag 'pull-aspeed-20220503' of https://github.com/legoater/qemu into staging

aspeed queue:

* New AST1030 SoC and eval board
* Accumulative mode support for HACE controller
* GPIO fix and unit

Merge tag 'pull-aspeed-20220503' of https://github.com/legoater/qemu into staging

aspeed queue:

* New AST1030 SoC and eval board
* Accumulative mode support for HACE controller
* GPIO fix and unit test
* Clock modeling adjustments for the AST2600
* Dummy eMMC Boot Controller model
* Change of AST2500 EVB and AST2600 EVB flash model (for quad IO)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmJwwq8ACgkQUaNDx8/7
# 7KF0IhAApbCCcg06PR66pmaDBFY2RWmU0XShDoCEeHyT5huQFcAJWNoqVAJ52E8L
# ZCPEeORQthxMwmtw7JLIGCFhDx4P4YzfNZRPANRosKs7BR0GequVgHp7c6fXhD/3
# A3w42hfuNR4Hrbsil/yhN2vxFAYXudA+NPez2ibex3UyVc/ZUu71nCqZTxh3wZdN
# XQTuqxWerA5RRBRtVn8n/aBp+3mo5enD4dx44KWMZxKxJaFJfZQHVZttGHU9azF+
# fXJ1lmrJZ7eHmWjCEvgnHXwl0nWiMwkLZ9/MKOAPkdjUG1JciGRxbJki0bGuS7Jr
# NzOyO0f++ZtOsuLGA03WiwR1oo3GmG7lBFqBcdzMwN2EMvDvVvJUp3v8IdV/L10P
# OJ10rBi6FDJuKGHJGIQywlFSYYjPb+DgNEWId2rugVVm4dR02Cn69amuL40OO9by
# /C7hO9gSvRTqSSdjFcdkbI2h+kx0354F2/gR2LFLBh1KUHulTJ4ErthrKBiuNPC8
# tsELzYVnxWVT+nc30Nmidg3uCW3/5zBlaj0qlL4aiFjKR5na6Wpz+oE/aNiNdyT3
# IBI+J5zvbtn/prNTWLW1TCuGdwj357LfYfkfkH8eqZWfX5vGq+5hVTc/m8EW5Cx8
# yV8JrbjX8uDI379skdl4imtedbKZhPLd7csM/zrorsJhBBwSoLA=
# =+hIh
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 02 May 2022 10:50:39 PM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20220503' of https://github.com/legoater/qemu:
aspeed/hace: Support AST1030 HACE
hw/gpio/aspeed_gpio: Fix QOM pin property
tests/qtest: Add test for Aspeed HACE accumulative mode
aspeed/hace: Support AST2600 HACE
aspeed/hace: Support HMAC Key Buffer register.
hw/arm/aspeed: fix AST2500/AST2600 EVB fmc model
test/avocado/machine_aspeed.py: Add ast1030 test case
aspeed: Add an AST1030 eval board
aspeed/soc : Add AST1030 support
aspeed/scu: Add AST1030 support
aspeed/timer: Add AST1030 support
aspeed/wdt: Add AST1030 support
aspeed/wdt: Fix ast2500/ast2600 default reload value
aspeed/smc: Add AST1030 support
aspeed/adc: Add AST1030 support
aspeed: Add eMMC Boot Controller stub
aspeed: sbc: Correct default reset values
hw: aspeed_scu: Introduce clkin_25Mhz attribute
hw: aspeed_scu: Add AST2600 apb_freq and hpll calculation function

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

aspeed/timer: Add AST1030 support

ast1030 tmc(timer controller) is identical to ast2600 tmc.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Si

aspeed/timer: Add AST1030 support

ast1030 tmc(timer controller) is identical to ast2600 tmc.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-6-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

aspeed/timer: Add AST1030 support

ast1030 tmc(timer controller) is identical to ast2600 tmc.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Si

aspeed/timer: Add AST1030 support

ast1030 tmc(timer controller) is identical to ast2600 tmc.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-6-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Twe

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)

# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qdev: set properties with device_class_set_props()

The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macr

qdev: set properties with device_class_set_props()

The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/timer/aspeed_timer: Add a fall through comment

Reported by GCC9 when building with CFLAG -Wimplicit-fallthrough=2:

hw/timer/aspeed_timer.c: In function ‘aspeed_timer_set_value’:
hw/timer/asp

hw/timer/aspeed_timer: Add a fall through comment

Reported by GCC9 when building with CFLAG -Wimplicit-fallthrough=2:

hw/timer/aspeed_timer.c: In function ‘aspeed_timer_set_value’:
hw/timer/aspeed_timer.c:283:24: error: this statement may fall through [-Werror=implicit-fallthrough=]
283 | if (old_reload || !t->reload) {
| ~~~~~~~~~~~^~~~~~~~~~~~~
hw/timer/aspeed_timer.c:287:5: note: here
287 | case TIMER_REG_STATUS:
| ^~~~
cc1: all warnings being treated as errors

Add the missing fall through comment.

Fixes: 1403f364472
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191218192526.13845-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

aspeed: Change the "scu" property definition

The Aspeed Watchdog and Timer models have a link pointing to the SCU
controller model of the machine.

Change the "scu" property definition so that it ex

aspeed: Change the "scu" property definition

The Aspeed Watchdog and Timer models have a link pointing to the SCU
controller model of the machine.

Change the "scu" property definition so that it explicitly sets the
pointer. The property isn't optional : not being able to set the link
is a bug and QEMU should rather abort than exit in this case.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191216-1' into staging

target-arm queue:
* Add support for Cortex-M7 CPU
* exynos4210_gic: Suppress gcc9 format-truncation war

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191216-1' into staging

target-arm queue:
* Add support for Cortex-M7 CPU
* exynos4210_gic: Suppress gcc9 format-truncation warnings
* aspeed: Various minor bug fixes and improvements
* aspeed: Add support for the tacoma-bmc board
* Honour HCR_EL32.TID1 and .TID2 trapping requirements
* Handle trapping to EL2 of AArch32 VMRS instructions
* Handle AArch32 CP15 trapping via HSTR_EL2
* Add support for missing Jazelle system registers
* arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on
* Add support for DC CVAP & DC CVADP instructions
* Fix assertion when SCR.NS is changed in Secure-SVC &c
* enable SHPC native hot plug in arm ACPI

# gpg: Signature made Mon 16 Dec 2019 11:08:07 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20191216-1: (34 commits)
target/arm: ensure we use current exception state after SCR update
hw/arm/virt: Simplify by moving the gic in the machine state
hw/arm/acpi: enable SHPC native hot plug
hw/arm/acpi: simplify AML bit and/or statement
hw/arm/sbsa-ref: Simplify by moving the gic in the machine state
target/arm: Add support for DC CVAP & DC CVADP ins
migration: ram: Switch to ram block writeback
Memory: Enable writeback for given memory region
tcg: cputlb: Add probe_read
arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on()
target/arm: Add support for missing Jazelle system registers
target/arm: Handle AArch32 CP15 trapping via HSTR_EL2
target/arm: Handle trapping to EL2 of AArch32 VMRS instructions
target/arm: Honor HCR_EL2.TID1 trapping requirements
target/arm: Honor HCR_EL2.TID2 trapping requirements
aspeed: Change the "nic" property definition
aspeed: Change the "scu" property definition
gpio: fix memory leak in aspeed_gpio_init()
aspeed: Add support for the tacoma-bmc board
aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

aspeed: Change the "scu" property definition

The Aspeed Watchdog and Timer models have a link pointing to the SCU
controller model of the machine.

Change the "scu" property definition so that it ex

aspeed: Change the "scu" property definition

The Aspeed Watchdog and Timer models have a link pointing to the SCU
controller model of the machine.

Change the "scu" property definition so that it explicitly sets the
pointer. The property isn't optional : not being able to set the link
is a bug and QEMU should rather abort than exit in this case.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-17-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191015' into staging

target-arm queue:
* Add Aspeed AST2600 SoC support (but no new board model yet)
* aspeed/wdt: Check corre

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191015' into staging

target-arm queue:
* Add Aspeed AST2600 SoC support (but no new board model yet)
* aspeed/wdt: Check correct register for clock source
* bcm2835: code cleanups, better logging, trace events
* implement v2.0 of the Arm semihosting specification
* provide new 'transaction-based' ptimer API and use it
for the Arm devices that use ptimers
* ARM: KVM: support more than 256 CPUs

# gpg: Signature made Tue 15 Oct 2019 18:09:42 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20191015: (67 commits)
hw/misc/bcm2835_mbox: Add trace events
hw/arm/bcm2835: Add various unimplemented peripherals
hw/arm/bcm2835: Rename some definitions
hw/arm/bcm2835_peripherals: Name various address spaces
hw/arm/bcm2835_peripherals: Improve logging
hw/arm/raspi: Use the IEC binary prefix definitions
aspeed/soc: Add ASPEED Video stub
aspeed: add support for the Aspeed MII controller of the AST2600
aspeed: Parameterise number of MACs
m25p80: Add support for w25q512jv
aspeed/soc: Add AST2600 support
aspeed: Introduce an object class per SoC
aspeed/i2c: Add AST2600 support
aspeed/i2c: Introduce an object class per SoC
hw/gpio: Add in AST2600 specific implementation
aspeed/smc: Add AST2600 support
aspeed/smc: Introduce segment operations
hw: wdt_aspeed: Add AST2600 support
watchdog/aspeed: Introduce an object class per SoC
aspeed/sdmc: Add AST2600 support
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

aspeed/timer: Add support for IRQ status register on the AST2600

The AST2600 timer replaces control register 2 with a interrupt status
register. It is set by hardware when an IRQ occurs and cleared

aspeed/timer: Add support for IRQ status register on the AST2600

The AST2600 timer replaces control register 2 with a interrupt status
register. It is set by hardware when an IRQ occurs and cleared by
software.

Modify the vmstate version to take into account the new fields.

Based on previous work from Joel Stanley.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-8-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

aspeed/timer: Add AST2600 support

The AST2600 timer has a third control register that is used to
implement a set-to-clear feature for the main control register.

On the AST2600, it is not configurab

aspeed/timer: Add AST2600 support

The AST2600 timer has a third control register that is used to
implement a set-to-clear feature for the main control register.

On the AST2600, it is not configurable via 0x38 (control register 3)
as it is on the AST2500.

Based on previous work from Joel Stanley.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

aspeed/timer: Add support for control register 3

The AST2500 timer has a third control register that is used to
implement a set-to-clear feature for the main control register.

This models the behav

aspeed/timer: Add support for control register 3

The AST2500 timer has a third control register that is used to
implement a set-to-clear feature for the main control register.

This models the behaviour expected by the AST2500 while maintaining
the same behaviour for the AST2400.

The vmstate version is not increased yet because the structure is
modified again in the following patches.

Based on previous work from Joel Stanley.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-6-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...