Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bi

Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug

Generate device tree entry for riscv-iommu PCI device, along with
mapping all PCI device identifiers to the single IOMMU device instance.

hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug

Generate device tree entry for riscv-iommu PCI device, along with
mapping all PCI device identifiers to the single IOMMU device instance.

Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-n

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c

show more ...

hw/char: Extract serial-mm

hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_

hw/char: Extract serial-mm

hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.

The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:

# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL

# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"

Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Conside

Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: Respect firmware ELF entry point

When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware e

hw/riscv: Respect firmware ELF entry point

When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.

Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20240819-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

This reverts a commit adding `#msi-cells=<0>` to the virt machine
as that commit resu

Merge tag 'pull-riscv-to-apply-20240819-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

This reverts a commit adding `#msi-cells=<0>` to the virt machine
as that commit results in PCI devices unable to us MSIs. Even though
it's a kernel bug, we don't want to break existing users.

* Revert adding #msi-cells to virt machine

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmbCzDEACgkQr3yVEwxT
# gBP2Jw/+Phcb9tw8vv3kHyjXaH5JuqMvRvE0DZi3Zub9cdwIygXEC8/o0q4Szh+4
# FGZbxSsQ6XdfOW87qY66kTlM8yxVJf2RoQcQ27QTs0kCM3TR/1nzRbc2wWPMYRmH
# FvOL926Nr+ysxtVd84HZc82GwQpEIG1qdWpy5VECMZXW8mtOTQjgltKuiH9Jl+ZX
# N0uqWc4/lp+x+UIZqS9b76AiZ8l1G5nRFdXgmKKU7J8iVeWLRRzV1NRu+cZP4WEv
# kjpMODdedScEcvqb122SVTTJcpdvhuB+bWH6mITajbt2G4YxsNYJ9594nef/sKBH
# hf3oSfXUnwDqTldnrkFonO9OhdO3ZCdtqw5Lzi1E/D2zny2CnMMIAcs8hbenVGkW
# NW0J/z84J+X1qf5gmt07l2BlUhBooCS8TJsbO8PX/lR2iCL/BxuKHEjxCnCZ6f5z
# 3FxhqO3Shk9FnfAsTxtY00RLmRo4t+ESTsBsZPiSXB3EmCo/BmgR/0Grm7UKZbbL
# /9lzUHyUYj09Mvk7IJc4KGjihfQ9TwjNdlmq2MlRHWdVT09+Bu7DRhHvNzuVYMb9
# 1iktWv4Fnit6Xe6rPOvNXF5ilmUu2fm3p6z2ogG8cRbPHPPQ7NLx8BQSqPvBHdfx
# KIV6f1xBJSSQcTdIq/ySnN1SF1h2YVPLIlv1Aap3kN/J71kkpLY=
# =C6id
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 19 Aug 2024 02:38:09 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240819-1' of https://github.com/alistair23/qemu:
Revert "hw/riscv/virt.c: imsics DT: add '#msi-cells'"

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Revert "hw/riscv/virt.c: imsics DT: add '#msi-cells'"

This reverts commit f42cdf2ea5b3a1dc369792d7acbf9cd3e5c90815.

Linux does not properly handle '#msi-cells=<0>' when searching for
MSI controller

Revert "hw/riscv/virt.c: imsics DT: add '#msi-cells'"

This reverts commit f42cdf2ea5b3a1dc369792d7acbf9cd3e5c90815.

Linux does not properly handle '#msi-cells=<0>' when searching for
MSI controllers for PCI devices which results in the devices being
unable to use MSIs. A patch for Linux has been sent[1] but until it,
or something like it, is merged and in distro kernels we should stop
adding the property. It's harmless to stop adding it since the
absence of the property and a value of zero for the property mean
the same thing according to the DT binding definition.

Link: https://lore.kernel.org/all/20240816124957.130017-2-ajones@ventanamicro.com/ # 1
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240816160743.220374-5-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when set

Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'

Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
cor

hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'

Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.

But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.

Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.

Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Extend virtual irq csrs masks to be 64 bit wide
* Move Guest irqs out of the core l

Merge tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Extend virtual irq csrs masks to be 64 bit wide
* Move Guest irqs out of the core local irqs range
* zvbb implies zvkb
* virt: add address-cells in create_fdt_one_aplic()
* virt: add aplic nodename helper
* virt: rename aplic nodename to 'interrupt-controller'
* virt: aplic DT: add 'qemu, aplic' to 'compatible'
* virt: aplic DT: rename prop to 'riscv, delegation'
* virt: change imsic nodename to 'interrupt-controller'
* virt: imsics DT: add 'qemu, imsics' to 'compatible'
* virt: imsics DT: add '#msi-cells'
* QEMU support for KVM Guest Debug on RISC-V
* Support RISC-V privilege 1.13 spec
* Add support for RISC-V ACPI tests
* Modularize common match conditions for trigger

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZ9OCEACgkQr3yVEwxT
# gBM6aRAApE7Cjo6U1MrcXywh897DnMV9TT9a0jWxhw659eOSk8Uo8mXNNmGSudcl
# +//jIQr/JB5YVDcnFAGWFDaMMev2hkbXG68IaLsfqA32CWZzrOgFpFP+sgicDKmP
# A+P/z0CL332hDRxlhglbIYukCN1bEjWbUDgZaXPVc7ieMM0mwDyFZt7jH65dNmNg
# HpmVcUSooUx8weHOKp0vCKCBcQ6neahjvweTYszsWjXgu51+VrpoSAAds98HHY9H
# vilbTGtJzGEmnfTCmm1GmRn5/g5iQzDKDge+Kg+OzINEfoOBByJerK27sGNRkzxt
# ZNUd0RM2q1wkfZ3XfLU3qEnxHson8SQp2+VYTqnEv3TdR0AjrnsxL7IUuFm+iTv4
# wG3IqBwt+efdAzc9k+K2smCyp3036HNrJHQSyhtxu+yU36K+jBKVq++pRzgOFTvl
# 87VvNI/dYL4hSJ4yS00ti2axl6GNEAEePHwQ0fRXvEdSGc4vOw3ayDqyqF0Gcy9+
# MJq+nV7BX9pEyTRZEKqTi2nB7xh3kq0e+mev2ByQlracBqHIayXC3DsDvPcUbiwJ
# 8bzX28kl5C28vYUVJjzYQgZy2XXGbbsnv3ifah4hi2NJESmYHN0uxs9raW9i+lhR
# 2FAm+eO6mxuJTIH/NTou+msxZJw2jTPLkYdG2e5UkTjUN7JKGnk=
# =bag2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jun 2024 03:00:01 AM PDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu: (32 commits)
target/riscv: Apply modularized matching conditions for icount trigger
target/riscv: Apply modularized matching conditions for watchpoint
target/riscv: Add functions for common matching conditions of trigger
target/riscv: Remove extension auto-update check statements
target/riscv: Add Zc extension implied rule
target/riscv: Add multi extension implied rules
target/riscv: Add MISA extension implied rules
target/riscv: Introduce extension implied rule helpers
target/riscv: Introduce extension implied rules definition
target/riscv: fix instructions count handling in icount mode
target/riscv: Fix froundnx.h nanbox check
hw/riscv/virt.c: Make block devices default to virtio
target/riscv: Support the version for ss1p13
target/riscv: Reserve exception codes for sw-check and hw-err
target/riscv: Add MEDELEGH, HEDELEGH csrs for RV32
target/riscv: Add 'P1P13' bit in SMSTATEEN0
target/riscv: Define macros and variables for ss1p13
target/riscv: Reuse the conversion function of priv_spec
target/riscv/kvm: define TARGET_KVM_HAVE_GUEST_DEBUG
target/riscv/kvm: handle the exit with debug reason
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/riscv/virt.c: Make block devices default to virtio

RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
i

hw/riscv/virt.c: Make block devices default to virtio

RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.

We also need to set no_cdrom to avoid getting a default cdrom device.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: imsics DT: add '#msi-cells'

The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.

[1] Documentation/devicetree/bindings/interrupt-controller/ris

hw/riscv/virt.c: imsics DT: add '#msi-cells'

The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.

[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml

Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: imsics DT: add 'qemu, imsics' to 'compatible'

The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.

[1] Documentation/devicetree/bindings/int

hw/riscv/virt.c: imsics DT: add 'qemu, imsics' to 'compatible'

The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.

[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml

Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: change imsic nodename to 'interrupt-controller'

The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interru

hw/riscv/virt.c: change imsic nodename to 'interrupt-controller'

The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.

[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml

Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'

The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.

[1] Documentation/devicetree/bindings/int

hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'

The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.

[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml

Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: aplic DT: add 'qemu, aplic' to 'compatible'

The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the
'compatible' property.

[1] Documentation/devicetree/bindings/interru

hw/riscv/virt.c: aplic DT: add 'qemu, aplic' to 'compatible'

The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the
'compatible' property.

[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml

Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: rename aplic nodename to 'interrupt-controller'

The correct name of the aplic controller node, as per Linux kernel DT
docs [1], is 'interrupt-controller@addr'.

[1] Documentation/de

hw/riscv/virt.c: rename aplic nodename to 'interrupt-controller'

The correct name of the aplic controller node, as per Linux kernel DT
docs [1], is 'interrupt-controller@addr'.

[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml

Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: add aplic nodename helper

We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.

W

hw/riscv/virt.c: add aplic nodename helper

We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.

While we're at it, in create_fdt_socket_aplic(), move 'aplic_name'
inside the conditional to avoid allocating a string that won't be used
when socket == NULL.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv/virt.c: add address-cells in create_fdt_one_aplic()

We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PL

hw/riscv/virt.c: add address-cells in create_fdt_one_aplic()

We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and
APLIC controllers must have this property.

PLIC already sets it in create_fdt_socket_plic(). Set the property for
APLIC in create_fdt_one_aplic().

[1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/

Suggested-by: Anup Patel <apatel@ventanamicro.com>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'misc-20240619' of https://github.com/philmd/qemu into staging

Misc patches queue

. Remove deprecated pc-i440fx-2.0 -> 2.3 machines (Phil)
. Always use little endian audio format in virti

Merge tag 'misc-20240619' of https://github.com/philmd/qemu into staging

Misc patches queue

. Remove deprecated pc-i440fx-2.0 -> 2.3 machines (Phil)
. Always use little endian audio format in virtio-snd (Phil)
. Avoid using Monitor in INTERRUPT_STATS_PROVIDER::print_info (Phil)
. Introduce x-query-interrupt-controllers QMP command (Phil)
. Introduce pnv_chip_foreach_cpu() to remove one CPU_FOREACH use (Cédric)
. Constify few uses of IOMMUTLBEvent (Phil)
. Wire loongson_ipi device to loongson3_virt/TCG (Jiaxun)
. Fix inclusion of tracing headers on s390x/TCG (Phil)
. Add few shortcuts missing to readline (Manos)
. Update ui/display entries in MAINTAINERS (Gerd)
. Use qemu_add_mouse_change_notifier on Cocoa (Akihiko)
. Fix Standard VGA screen blanking and cleanups (Gerd)
. Fix USB/MTP reported "free space" value (Fabio)
. Cast size_memop() returned value (Roman)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZyuKYACgkQ4+MsLN6t
# wN5guxAAvwJWbxQA8B4+gfiYaMK0AnM4leuCZ+8Sf+LhK32k2UkFA4NnKBkxGmO+
# 45NOEEEEv1Tukvtq1STHkYEdERJbHndpSFk2XmaYY09Ofo54vv2dXy6MD6GJriuA
# Pr9Mivzs490RSPXmxhsa8GU5IE6CO3LamgpSeH8XxPTvCbRIiB8LcKsme6utBAZv
# 9dHnEX5sXEEY2ZvArQd+eueyJfRyN4+1PpQkE9uH/wLIBqHAkHgSvFVaLo+PtA7T
# xfcFvrawRTWIU+P1lojmCMb+mOj+YS7yigpkkYQC4SFm0PEv5J5nyhr/mhhiVuSS
# tK8DNNi44F7/Z2CzEwbwk1PEnfKWtCgG2rEiR5uT6E8nmvxaOr2LfswBjLSwVDPS
# mBOnjTMLqTBPKq8E8x2di1h2cJ9PZ90zZtWzYD8Eqoq+eqz/x+8z/qP4vifzO+NB
# 7lj4IQZzLn+iktDGpjfh2RNoV9F9i9BwFGJqO2i0MzVftezJuGfe9olVOP2ErpnR
# jqB7gzgc6g4tYiOK9WchuIeB/S9dU/5qqQxWwINWX0j4cHF6Qq71LyejCTfpqpf8
# jjF65XdGHcyVm9NAnr18MTzwdu3YYWf4w2OGIHg7iGLC0hv3U+EzEEMpv2E6pelM
# iXgtqkRQm9qJaSrjfv0MUp9irjq01aIaHceFmP20QtkMP256E6c=
# =Ed8Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jun 2024 03:53:26 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'misc-20240619' of https://github.com/philmd/qemu: (74 commits)
exec: Make the MemOp enum cast explicit
ui+display: rename is_buffer_shared() -> surface_is_allocated()
ui+display: rename is_placeholder() -> surface_is_placeholder()
stdvga: fix screen blanking
ui/cocoa: Use qemu_add_mouse_change_notifier
MAINTAINERS: drop spice+ui maintainership
MAINTAINERS: drop virtio-gpu maintainership
util/readline: Add C-u shortcut
util/readline: Add C-n, C-p shortcuts
util/readline: Fix lints for readline_handle_byte
target/s390x: Use s390_skeys_get|set() helper
hw/s390x: Introduce s390_skeys_get|set() helpers
hw/mips/loongson3_virt: Wire up loongson_ipi device
hw/intc/loongson_ipi: Replace ipi_getcpu with cpu_by_arch_id
hw/intc/loongson_ipi: Provide per core MMIO address spaces
hw/intc: Remove loongarch_ipi.c
hw/usb/dev-mtp: Correctly report free space
hw/usb: Remove unused 'host.h' header
hw/i386/iommu: Constify IOMMUTLBEvent in vtd_page_walk_hook prototype
memory: Constify IOMMUTLBEvent in memory_region_notify_iommu()
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/smbios: Remove 'uuid_encoded' argument from smbios_set_defaults()

'uuid_encoded' is always true, remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1

hw/smbios: Remove 'uuid_encoded' argument from smbios_set_defaults()

'uuid_encoded' is always true, remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>

show more ...

Merge tag 'hw-misc-20240425' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
-

Merge tag 'hw-misc-20240425' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
- Various cleanups (Thomas, Zhao, Inès, Bernhard)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t
# wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B
# uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn
# zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA
# MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i
# Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/
# aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp
# l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2
# zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp
# gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY
# SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95
# 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0=
# =tm+U
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits)
hw/core: Support module-id in numa configuration
hw/core: Introduce module-id as the topology subindex
hw/core/machine: Support modules in -smp
hw/core/machine: Introduce the module as a CPU topology level
hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init()
hw/misc : Correct 5 spaces indents in stm32l4x5_exti
hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h'
hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc
hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean
hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean
hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean
hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device
hw: Fix problem with the A*MPCORE switches in the Kconfig files
hw/riscv/virt: Replace sprintf by g_strdup_printf
hw/misc/imx: Replace sprintf() by snprintf()
hw/misc/applesmc: Simplify DeviceReset handler
target/i386: Move APIC related code to cpu-apic.c
hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h
scripts: add script to compare compatibility properties
python/qemu/machine: add method to retrieve QEMUMachine::binary field
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/riscv/virt: Replace sprintf by g_strdup_printf

sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Use g_strdup_printf instead.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.

hw/riscv/virt: Replace sprintf by g_strdup_printf

sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Use g_strdup_printf instead.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use g_strdup_printf]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240412073346.458116-26-richard.henderson@linaro.org>

show more ...

Merge tag 'pull-riscv-to-apply-20240322' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.0

* Do not enable all named features by default
* A range of Vector fixes
* Update APLIC

Merge tag 'pull-riscv-to-apply-20240322' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.0

* Do not enable all named features by default
* A range of Vector fixes
* Update APLIC IDC after claiming iforce register
* Remove the dependency of Zvfbfmin to Zfbfmin
* Fix mode in riscv_tlb_fill
* Fix timebase-frequency when using KVM acceleration

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmX9RscACgkQr3yVEwxT
# gBNaRg/+KUSF6AuY25pS7GawbufBbwWWaWN9G/inPVoCnLbeYrkB3uZw3nBd3iV8
# KiD9Azabl6TLBFC/f7eP9alNDIoSrq5EliayrlFEZIncYvig2Y3CkWUeK6oJqDp2
# Dz1Vah4IB96bU2/M9icyHkh3tnSnbhq0JrbgoAYwWutZy4ERYugTHulOGPxBj64I
# JIfb8wYqaak3Uak+g0mz/YBNHegLEDxIzIRhO4oWPE0MWKSO3t79G9qVAYi7pkFB
# ZQQasZy0h9ZpwKvVajiO8yjwh7COI0IPU+4vZNkNXue0SXQvAvcKA4DdaTwmMTio
# 9UM9HRB371F5LtJLdvAT2TR8FfW26Y7xBe458jheFOnPHKwxEFtUFCQ39UJB3bDN
# k7CYvU3GIqUJHD7PtYZfzTdYkdnIDpr9yKTPP2/nCN53FzXuJs/XTyySphJ6mZ2m
# dsr1bnJn/ncZP7W2vdWGfgQEKt2CHfE5qWM++RwhmQc+IKn2ImMA0hBsg6Gl2imB
# 9WANt3UX784VDmcwcFVgDgr6nftDs7gjVCtHAaRV7Oq2f9hcr17pRxg66mSXs0BX
# fMhcqHBe01LpZQRbaGQ0ImTQksEFyH2KTvt0kjF4SfpVzMfVOi/Zmy9goYNq4iYd
# tfucBbXVhpzbJ/9HeOzKAJQ2Wt0NyLiyDIOkWXj61WquS/0Mr9g=
# =8vP1
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 22 Mar 2024 08:52:23 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240322' of https://github.com/alistair23/qemu:
target/riscv/kvm: fix timebase-frequency when using KVM acceleration
target/riscv: Fix mode in riscv_tlb_fill
target/riscv: rvv: Remove the dependency of Zvfbfmin to Zfbfmin
hw/intc: Update APLIC IDC after claiming iforce register
target/riscv/vector_helper.c: optimize loops in ldst helpers
target/riscv: enable 'vstart_eq_zero' in the end of insns
trans_rvv.c.inc: remove redundant mark_vs_dirty() calls
target/riscv: remove 'over' brconds from vector trans
target/riscv/vector_helpers: do early exit when vstart >= vl
target/riscv: always clear vstart for ldst_whole insns
target/riscv: always clear vstart in whole vec move insns
target/riscv/vector_helper.c: fix 'vmvr_v' memcpy endianess
trans_rvv.c.inc: set vstart = 0 in int scalar move insns
target/riscv/vector_helper.c: set vstart = 0 in GEN_VEXT_VSLIDEUP_VX()
target/riscv: do not enable all named features by default

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...